Free English ABB POWERVALUE 11 LI UP 800VA (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ABB POWERVALUE 11 LI UP 800VA (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What do the safety symbols used in the documentation for the ABB POWERVALUE 11 LI UP 800VA mean?
The following symbols are used to indicate safety information:
Electrical Hazard Symbol (Lightning bolt in a triangle) with the word “DANGER”: This indicates an imminent electrical hazard. Failure to observe the related safety note may cause injury, death, or equipment damage.
Exclamation mark in a triangle with the word “WARNING”: This indicates a potentially dangerous situation. Failure to observe may cause injury, death, or equipment damage.
Crossed-out wheeled bin symbol: This indicates that the item should not be disposed of with ordinary trash.
What are the essential safety rules for handling the ABB POWERVALUE 11 LI UP 800VA during disassembly?
RISK OF ELECTRIC SHOCK:
Before disassembling the unit, make sure the UPS is completely switched off and internal capacitors have been discharged by waiting at least 5 minutes after shutting down the unit.
BATTERY HANDLING PRECAUTIONS:
A battery can present a risk of electrical shock and high short circuit current. The following precautions should be observed when disassembling a unit that contains batteries:
A) Remove watches, rings or other metal objects.
B) Use tools with insulated handles.
C) Wear rubber gloves and boots.
D) Do not lay tools or metal parts on top of batteries.
E) Disconnect the charging source prior to connecting or disconnecting of battery terminals.
F) Establish if the battery is inadvertently grounded. If inadvertently grounded, remove source from ground. Contact with any part of a grounded battery can result in electrical shock.
Keep out of battery poles which contain dangerous DC-voltages causing fatal accidents. Inappropriate manipulations of the batteries can cause lightning sparks.
Which substances and components in the ABB POWERVALUE 11 LI UP 800VA require selective treatment for recycling?
The following table guides the selective treatment and recycling for substances of concern in the ABB POWERVALUE 11 LI UP 800VA.
| Substance(s)/Component(s) | Where used (potential) |
|---|---|
| Batteries | Used as VRLA block(s). |
| Printed circuit boards | Used. |
| Plastic containing brominated flame retardants (BFRs) | – plastic enclosure, – PVC insulation of internal wiring, – input/output receptacles, – bobbin of 50Hz transformer. |
| Liquid crystal displays (> 100 cm²) | Not used. |
| Spare electrolyte capacitors (height > 25 mm, diameter > 25 mm) | Not used. |
| Polychlorinated biphenyls containing capacitors | Not used. |
| Mercury containing components | Not used. |
| Toner cartridges | Not used. |
| Asbestos components which contain asbestos | Not used. |
| Cathode ray tubes | Not used. |
| CFC, HCFC, HFC, HC | Not used. |
| Gas discharge lamps | Not used. |
| External electric cables | Not used. |
| Components containing refractory ceramic fibres | Not used. |
| Components containing radioactive substances | Not used. |
What other materials and components of the ABB POWERVALUE 11 LI UP 800VA should be considered for recycling?
Other materials and components to consider are:
| High level component | Substance(s) |
|---|---|
| Original packaging | – Paper, – Polyethylene foam or film |
| Fasteners | – Steel, zinc plated |
| Cables with end terminals | – Copper, – Brass, – PVC, – Nylon, – PBT |
The following electrical components require further separation after removal from the UPS. They might contain materials or components requiring selective disposal:
– 50Hz Transformer;
– fan.
What are the specific warnings regarding electric shock and batteries for the ABB POWERVALUE 11 LI UP 800VA?
RISK OF ELECTRIC SHOCK: Capacitors and other UPS components may store non-lethal energy for a long time. Handle every conductive part with care, avoiding short circuits that can cause sparking or arcing.
VRLA BATTERY BLOCKS WARNING:
The batteries contain hazardous substances such as:
– INORGANIC LEAD, LEAD COMPOUNDS (Pb – CAS 7439-92-1);
– SULFURIC ACID (CAS 7664-93-9 – CAUSES SEVERE BURNS).
The concentration may change, depending on the manufacturer.
Cutting or damaging the plastic case will expose the environment to further hazardous substances like LEAD MONOXIDE (CAS 1317-36-8 – HARMFUL BY INHALATION AND IF SWALLOWED).
How do I remove the battery from my ABB POWERVALUE 11 LI UP 800VA for recycling?
Follow these steps to remove the battery from the ABB POWERVALUE 11 LI UP 800VA:
1. Loosen the screws that hold the bottom battery panel (A).
2. Remove the bottom battery panel (A).
3. Swipe out the battery (B).
4. Disconnect the battery wires (C).
How can I access the internal components of the ABB POWERVALUE 11 LI UP 800VA?
To access the internal components, remove all the screws on the base and open the cover. The internal components include:
– Fan
– Printed Circuit Board
– Receptacles
– Transformer
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD ABB POWERVALUE 11 LI UP 800VA (01) PDF DOCUMENT
How to remove the top cover
On the last page of this manual (Page 10), it says “Remove all the screws on the base, opening the cover”