Free English 3SIXT KICK 3S-0339 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD 3SIXT KICK 3S-0339 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What should I do before using my 3SIXT KICK 3S-0339 for the first time?
You should fully charge your 3SIXT KICK 3S-0339 for at least 2 hours through a wall outlet before its first use.
How do I recharge the 3SIXT KICK 3S-0339 speaker?
To recharge your 3SIXT KICK 3S-0339, insert the supplied USB 2.0 cable (micro USB end) into the speaker’s 5V input port. Insert the other USB end of the cable into the USB 2.0 port of your wall adaptor, laptop, or PC.
How do I pair my 3SIXT KICK 3S-0339 with a device for the first time?
1. Enable your device’s (e.g., smartphone or tablet) Bluetooth.
2. Slide the Power Button on the 3SIXT KICK 3S-0339 to ‘ON’ to turn it on. It will make a sound and the Bluetooth/Speakerphone button will flash blue.
3. Hold down the Bluetooth/Speakerphone button for 4 seconds and wait for a tone.
4. The speaker should appear in your device’s paired devices list. ‘Pair’ your device with the Kick.
5. The speaker will then make another tone to confirm the pairing.
You are now free to play music and audio through the speaker. Adjust the volume of the Kick through your device’s volume settings.
How do I connect my 3SIXT KICK 3S-0339 after the initial pairing?
For every pairing after your first, you only need to turn on your device’s Bluetooth, turn on the 3SIXT KICK 3S-0339, and hold down the Bluetooth/Speakerphone button for 4 seconds.
How do I control Bluetooth audio playback on the 3SIXT KICK 3S-0339?
• Press the Bluetooth/Speakerphone button for four seconds to enter Bluetooth Mode.
• Press the Bluetooth/Speakerphone button for 1 second to pause/play.
• When the speaker is in standby, press the Bluetooth/Speakerphone button for 4 seconds to change between Bluetooth and AUX Mode.
How do I use the speakerphone functions on my 3SIXT KICK 3S-0339?
• Press the Bluetooth/Speakerphone button to pick up or hang up an incoming call (while in Bluetooth Mode only).
• Press the Bluetooth/Speakerphone button for 2 seconds to reject a call.
What should I do if the Bluetooth connectivity of my 3SIXT KICK 3S-0339 is poor?
The Bluetooth transmission range or connectivity could be affected by low battery power. In that case, recharge the speaker immediately.
What should I do if my 3SIXT KICK 3S-0339 malfunctions during operation?
When encountering any fault during operation, please cut off the power supply and disconnect the USB cable to prevent further damage to the speaker or other components.
What are the important safety instructions for the 3SIXT KICK 3S-0339?
1. Before recharging Kick through a wall outlet, make sure the wall outlet voltage is 5V.
2. Make sure to use a standard USB 2.0 Charge & Sync Cable with the appropriate specifications – other cables may damage your smartphone, tablet or Kick.
3. Do not drop, knock, disassemble or attempt to repair Kick.
4. Do not immerse or put Kick in water and keep Kick in a dry place.
5. Do not expose Kick to excessive heat including sunlight and fire.
6. Do not use Kick near explosive gases or flammable materials.
7. Do not burn or incinerate Kick.
8. Do not expose Kick to harsh chemicals.
9. Turning Kick’s volume up to the max shortens the life of Kick. It also may damage your hearing.
10. Putting anything in Kick’s input or output ports, other than a standard USB 2.0 charge & sync cable will cause damage or short out Kick.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD 3SIXT KICK 3S-0339 (01) PDF DOCUMENT