3SIXT KICK 3S-0336 (01) PDF Document

To charge your 3SIXT KICK 3S-0336 for the first time, connect the supplied USB 2.0 cable (micro USB end a) into the 3SIXT KICK 3S-0336’s 5V input port (b). Insert the other end of the cable (USB 2.0 end c) into the USB 2.0 port of your wall adaptor, laptop, or PC (d). Ensure you charge it for at least 2 hours through a wall outlet before first use.

To recharge your 3SIXT KICK 3S-0336, insert the supplied USB 2.0 cable (micro USB end a) into the 3SIXT KICK 3S-0336’s 5V input port (b). Insert the USB 2.0 end of the cable (c) into the USB 2.0 port of your wall adaptor, laptop, or PC (d).

To pair your 3SIXT KICK 3S-0336 for the first time with your device, enable Bluetooth on your device (e.g., smartphone or tablet). Slide the Power Button (h) to ‘ON’ to turn the 3SIXT KICK 3S-0336 on. You will hear a sound and the Bluetooth/Speakerphone button (e) will flash blue. Then, hold down the Bluetooth/Speakerphone button (e) for 4 seconds and wait for a tone. The 3SIXT KICK 3S-0336 should appear in your device’s paired devices list. ‘Pair’ your device with the 3SIXT KICK 3S-0336. Another tone will confirm the pairing. You can now play music and audio through the 3SIXT KICK 3S-0336. Adjust the volume through your device’s volume settings.

For subsequent pairings, simply turn on your device’s Bluetooth, turn on the 3SIXT KICK 3S-0336, and hold down the Bluetooth/Speakerphone button (e) for 4 seconds.

To enter Bluetooth Mode on your 3SIXT KICK 3S-0336, press the button (e) for four seconds.

To pause or play music, press the button (e) for 1 second.

When the speaker is in standby, press the button (e) for 4 seconds to switch between Bluetooth and AUX Mode.

To pick up or hang up an incoming call on your 3SIXT KICK 3S-0336 (while in Bluetooth Mode only), press the button (e).

To reject a call, press the button (e) for 2 seconds.

• Before recharging your 3SIXT KICK 3S-0336 through a wall outlet, ensure the wall outlet voltage is 5V.
• Use only a standard USB 2.0 Charge & Sync Cable with the appropriate specifications. Other cables may damage your smartphone, tablet, or 3SIXT KICK 3S-0336.
• Do not drop, knock, disassemble, or attempt to repair the 3SIXT KICK 3S-0336.
• Do not immerse the 3SIXT KICK 3S-0336 in water; keep it in a dry place.
• Do not expose the 3SIXT KICK 3S-0336 to excessive heat, including direct sunlight and fire.
• Do not use the 3SIXT KICK 3S-0336 near explosive gases or flammable materials.
• Do not burn or incinerate the 3SIXT KICK 3S-0336.
• Do not expose the 3SIXT KICK 3S-0336 to harsh chemicals.
• Turning the 3SIXT KICK 3S-0336’s volume up to the maximum may shorten its lifespan and could damage your hearing.
• Inserting anything other than a standard USB 2.0 charge & sync cable into the 3SIXT KICK 3S-0336’s input or output ports can cause damage or short circuit the device.
• If you encounter any fault during operation, disconnect the power supply and the USB cable to prevent further damage to the speaker or other components.
• The Bluetooth transmission range or connectivity of the 3SIXT KICK 3S-0336 may be affected by low battery power. In such cases, recharge immediately.