Free English V-TAC VT-4435 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD V-TAC VT-4435 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the technical specifications for the V-TAC VT-4435 series LED Flood Lights?
| MODEL | SKU | WATTS | LUMENS | BEAM ANGLE | LIFE SPAN | DF | CRI | INPUT VOLTAGE | OPERATION TEMPERATURE | DIMENSION | N.W (KGS) | MAX MOUNTING HEIGHT | PROJECTED AREA (mm²) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VT-4435 | 9891-5 | 30W | 5550Lm | 115° | 25000H | >0.9 | >70 | AC220-240V 50Hz | -20 to +45°c | 164.5x153x34mm | 0.41 | <5M | 25168.5 |
| VT-4456 | 9892-5, 9893-5 | 50W | 9250Lm | 115° | 25000H | >0.9 | >70 | AC220-240V 50Hz | -20 to +45°c | 183.5x169x34mm | 0.56 | <5M | 31011.5 |
| VT-44105 | 9894-5, 9895-5 | 100W | 18500Lm | 115° | 25000H | >0.9 | >70 | AC220-240V 50Hz | -20 to +45°c | 253.5×242.5x40mm | 1.1 | <5M | 61473.75 |
| VT-44205 | 9896-5, 9897-5 | 200W | 37000Lm | 115° | 25000H | >0.9 | >70 | AC220-240V 50Hz | -20 to +45°c | 402.5×349.5x44mm | 2.8 | <5M | 140673.75 |
What is the wire length for the different models of the V-TAC VT-4435 series?
| WATTAGE | WIRE LENGTH |
|---|---|
| 30W | 150mm |
| 50W | 150mm |
| 100W | 1 M |
| 200W | 1 M |
How do I install the V-TAC VT-4435 LED Flood Light?
Please ensure electricity is switched off before installation.
1. Remove the screw and the bracket afterward.
2. Before drilling, mark the hole position for fixing the bracket onto the wall (Screw not supplied).
3. Screw the retaining bracket to the wall with a suitable quantity of screws.
4. Mount the bracket back to the fixture. Adjust the floodlight according to the desired position. Tighten the screw.
5. Connect your main cable (HO5RN F3G1.0mm2 Recommended) with the input lead of our product through the waterproof junction box.
Note: The line (-) of the lead. (Need to use the junction box of IP65 or above, ensure to tighten the waterproof screw). Switch on the power to make sure if the product is working.
What are the safety warnings for installing the V-TAC VT-4435 LED Flood Light?
Please follow these safety warnings:
• Please make sure to turn off the power before starting the installation.
• Installation must be performed by a qualified electrician.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
• Replace any cracked protective shield.
• Terminal block not included.
• Proper grounding should be ensured throughout the installation.
• Minimum distance from lighted objects 1m.
• For outdoor use.
• To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
• In order to maintain the IP protection of the product, the cable entry/gland should be installed on the bottom side.
What are the general usage and mounting guidelines for the V-TAC VT-4435?
• Do not use in areas with limited ventilation or outside the rated ambient temperature range (-20 to +45°c).
• Connect with a waterproof cable house only.
• Please do not mount to a surface that is prone to vibrations.
• The product is intended for outdoor use.
Can the light source in the V-TAC VT-4435 be replaced?
Yes, the LED light source is replaceable, but it must be done by a professional. The light source contained in the luminaire shall only be replaced by the manufacturer, their service agent, or a similar qualified person.
What should I do if the external flexible cable of my V-TAC VT-4435 is damaged?
If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, their service agent, or a similar qualified person in order to avoid a hazard.
How should I dispose of the V-TAC VT-4435 LED Flood Light?
The product is marked with a symbol indicating that it should not be disposed of with other household wastes.
Are there instructions for disassembling the V-TAC VT-4435?
A disassembly diagram is provided in the manual, but it is intended for market surveillance teams only.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD V-TAC VT-4435 (01) PDF DOCUMENT