V-TAC VT-44105 (01) PDF Document

*This product contains a light source of energy efficiency class <B>.

The key features are:

• Super Bright with 185+ LM/WATT Efficiency

• IP65 Rating

• Sphere 360° Stays Bright technology

Please adhere to the following safety warnings before installation:

• Please make sure to turn off the power before starting the installation.

• Installation must be performed by a qualified electrician.

• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

• Replace any cracked protective shield.

• Proper grounding should be ensured throughout the installation.

• Minimum distance from lighted objects is 1 meter.

• For outdoor use only.

Yes, the V-TAC VT-44105 has a replaceable (LED only) light source. However, this replacement must be performed by a professional.

Follow these steps for installation. Ensure electricity is switched off before you begin.

Step 1. Do not use in areas with limited ventilation or outside the rated ambient temperature range. Do not mount to a surface that is prone to vibrations.

Step 2. Remove the screw and the bracket from the floodlight.

Step 3. Before drilling, mark the hole position for fixing the bracket onto the wall (screws not supplied).

Step 4. Screw the retaining bracket to the wall with a suitable quantity of screws.

Step 5. Mount the bracket back to the fixture. Adjust the floodlight according to the desired position and tighten the screw.

Step 6. Connect your main cable (HO5RN F3G1.0mm2 Recommended) with the input lead of the product through a waterproof junction box (IP65 or above). Ensure you tighten the waterproof screw.

Step 7. Switch on the power to make sure the product is working.

The V-TAC VT-44105 is a 100W model and comes with a 1-meter wire.

The wire color coding is as follows:

• Blue: N (Neutral)

• Y./Grn. (Yellow/Green): Ground

• Brown: L (Live)

Yes, please take note of the following:

• To reduce the risk of strangulation, the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.

• In order to maintain the IP protection of the product, the cable entry/gland should be installed on the bottom side.

The symbols on the manual indicate important safety information:

• A crossed-out wheeled bin symbol: This marking indicates that this product should not be disposed of with other household wastes.

• A lightning bolt inside a triangle: This symbol means “Caution, risk of electric shock.”