FREE ENGLISH V-TAC VT-7958 (01) PDF DOCUMENT.
FREE ENGLISH V-TAC VT-7958 (01) PDF USER GUIDE.
FREE ENGLISH V-TAC VT-7958 (01) PDF USER MANUAL.
FREE ENGLISH V-TAC VT-7958 (01) PDF OWNER GUIDE.
FREE ENGLISH V-TAC VT-7958 (01) PDF OWNER MANUAL.
FREE ENGLISH V-TAC VT-7958 (01) PDF REFERENCE GUIDE.
FREE ENGLISH V-TAC VT-7958 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH V-TAC VT-7958 (01) PDF REFERENCE MANUAL.
FREE ENGLISH V-TAC VT-7958 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH V-TAC VT-7958 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD V-TAC VT-7958 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications of the V-TAC VT-7958 LED Ceiling Light?
| MODEL | VT-7958 |
| SKU | 15356 |
| WATTS | 150W |
| LUMENS | 15500 Lm |
| BEAM ANGLE | 360° |
| CCT | 3000K/4000K/6500K |
| MATERIAL | Steel+Acrylic |
| IP RATING | IP20 |
| BASE SIZE | 480x480x30mm |
| DIMENSION | 510x510mm |
| INPUT POWER | AC: 180-240V, 50Hz |
What safety warnings should I be aware of when installing the V-TAC VT-7958?
Please follow these safety warnings for the V-TAC VT-7958:
1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
4. Proper grounding should be ensured throughout the installation.
5. For Indoor Use only.
How do I install the V-TAC VT-7958 LED Ceiling Light?
To install your V-TAC VT-7958, please follow these steps:
1. Switch off the power before starting the installation.
2. Use screws to fix the mounting bar to the junction box.
3. Make the wire connections with connectors:
– Connect the live wire (L) from the fitting to the live wire from the main power supply.
– Connect the neutral wire (N) from the fitting to the neutral wire from the main power supply.
– Connect the earth wire (G) from the fitting to the earth wire from the main power supply.
– Please pay close attention and make sure the wires are not exposed outside when wiring connections.
4. Use screws to fix the canopy to the mounting bar.
5. Check if the installation is complete and turn on the power.
What do the wire colors in the V-TAC VT-7958 wiring diagram mean?
The wiring for the V-TAC VT-7958 is as follows:
N: Neutral Supply can be Blue or Black
G: Ground Supply can be Green-yellow
L: Live Supply can be Red or Brown
How do I use the remote control for the V-TAC VT-7958 light?
The remote control for the V-TAC VT-7958 has the following functions:
Ambiance Light ON/OFF: Turns the main light on or off.
Night Light: Activates a low-light mode.
Color Temperature +/-: Increases or decreases the color temperature.
Brightness +/-: Increases or decreases the brightness.
Automatic Change RGB: Automatically cycles through RGB colors.
Timing: Sets a timer.
Turn ON: Turns the light on.
Turn OFF: Turns the light off.
What does the symbol of a lightning bolt in a triangle mean on the V-TAC VT-7958 instructions?
This symbol on the V-TAC VT-7958 instructions indicates: Caution, risk of electric shock.
What does the symbol of a crossed-out wheeled bin mean on the V-TAC VT-7958 instructions?
This marking on the V-TAC VT-7958 instructions indicates that this product should not be disposed of with other household wastes.
CLICK HERE TO DOWNLOAD V-TAC VT-7958 (01) PDF DOCUMENT