FREE ENGLISH V-TAC VT-139ST (01) PDF DOCUMENT.
FREE ENGLISH V-TAC VT-139ST (01) PDF USER GUIDE.
FREE ENGLISH V-TAC VT-139ST (01) PDF USER MANUAL.
FREE ENGLISH V-TAC VT-139ST (01) PDF OWNER GUIDE.
FREE ENGLISH V-TAC VT-139ST (01) PDF OWNER MANUAL.
FREE ENGLISH V-TAC VT-139ST (01) PDF REFERENCE GUIDE.
FREE ENGLISH V-TAC VT-139ST (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH V-TAC VT-139ST (01) PDF REFERENCE MANUAL.
FREE ENGLISH V-TAC VT-139ST (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH V-TAC VT-139ST (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD V-TAC VT-139ST (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications for the V-TAC VT-139ST LED Street Light?
| MODEL | VT-139ST |
| SKU | 2120426, 2120427 |
| WATTS | 100W |
| USEFUL LUMENS | 11480 lm |
| LUMENS@Sphere 360° | 13500 lm |
| CRI | >70 |
| DF | 0.9 |
| BEAM ANGLE | 115° |
| LONG LIFE | 25,000 Hours |
| ON/OFF CYCLE | >15000 Times |
| SURGE PROTECTION GRADE | 2KV/4KV |
| ADJUSTABLE ANGLE | 90° |
| MOUNTING DIAMETER | Ø60MM |
| INPUT VOLTAGE | AC:120-240V 50/60Hz |
| BODY TYPE | Aluminium |
| DIMENSION | 567x99x179mm |
What safety warnings should I be aware of before installing the V-TAC VT-139ST?
Please make sure to turn off the power before starting the installation. Installation must be performed by a qualified electrician.
Caution: Risk of electric shock.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Replace any cracked protective shield.
Maintain a minimum distance of 1m from lighted objects.
Proper grounding should be ensured throughout the installation.
Please read through all following instructions before installing the unit.
The user should prepare all the necessary accessories and spare parts (Spare parts not provided) including a junction box.
The raised lighting must be connected to the earth ground.
Strictly follow these instructions for installing, and avoid the intensity of the power cable during installation.
The V-TAC VT-139ST is for outdoor use only.
How do I install the V-TAC VT-139ST LED Street Light?
1. Switch OFF the power before starting the installation.
2. Connect the supply wires to the luminaire as displayed in the wiring diagram.
3. Choose your mounting option:
(a) For Pole Mounting: Pass the cable through the mounting adaptor. Tighten the screws on the pole with an M8 Allen wrench. Use the wrench to loosen the screw on the luminaire, adjust the angle, and then tighten the screw.
(b) For Wall Mounting: Pass the cable through the mounting adaptor. Fasten screws against the wall using 4 M8 screws (NOT INCLUDED). Use the wrench to loosen the screw on the luminaire, adjust the angle, and then tighten the screw.
4. Turn ON the power to test the light.
What is the wiring standard for the V-TAC VT-139ST?
| Neutral | Blue |
| Live | Brown |
| Ground | Yellow&Green |
Are there instructions for dismantling the V-TAC VT-139ST?
Yes, there are dismantling instructions provided for the Market surveillance team only.
Note: Light source removal will void the warranty.
CLICK HERE TO DOWNLOAD V-TAC VT-139ST (01) PDF DOCUMENT