FREE ENGLISH V-TAC VT-61040 (01) PDF USER GUIDE
FREE ENGLISH V-TAC VT-61040 (01) PDF USER MANUAL
FREE ENGLISH V-TAC VT-61040 (01) PDF OWNER GUIDE
FREE ENGLISH V-TAC VT-61040 (01) PDF OWNER MANUAL
FREE ENGLISH V-TAC VT-61040 (01) PDF REFERENCE GUIDE
FREE ENGLISH V-TAC VT-61040 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH V-TAC VT-61040 (01) PDF REFERENCE MANUAL
FREE ENGLISH V-TAC VT-61040 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH V-TAC VT-61040 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD V-TAC VT-61040 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications for the LED Backlit Panel?
| MODEL | VT-61040 |
| SKU | 23822, 23823 |
| POWER | 40W |
| LUMENS | 4800 Lm |
| BEAM ANGLE | 110° |
| CRI | ≥80 |
| DF | ≥0.9 |
| LIFE SPAN | 30,000 Hours |
| ON/OFF CYCLE | 20,000 Times |
| IP RATING | IP20 |
| OPERATING TEMPERATURE | -10°C to +35°C |
| INPUT POWER | AC: 220-240V, 50/60Hz |
| DIMENSION | 595±1.0×595±1.0×33±3.0 mm |
What safety warnings should I follow before and during installation?
Caution, Risk of electric shock.
Please make sure to turn off the power before starting the installation.
Installation should only be done by a certified electrician.
Terminal block not included.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
For Indoor use only.
How do I install the LED Backlit Panel?
1. Make a hole ceiling.
2. Put up the panel onto the ceiling.
3. Wiring the DC cable of the panel to the powersupply. And wiring the AC source cable to the powersupply.
4. Turn on the switch, test the fixture light on.
Can this luminaire be covered with thermally insulating material?
Luminaires not suitable for covering with thermally insulating material.
What are the recommended operating hours for this product?
The products are suitable for 10-12 Hours Daily operation.
How should this product be disposed of at the end of its life?
This marking indicates that this product should not be disposed of with other household wastes.
CLICK HERE TO DOWNLOAD V-TAC VT-61040 (01) PDF MANUAL