TIMAGO ERGOTIM (01) PDF DOCUMENT

Before using the product, read the provided instructions. The instruction contains information necessary for the safe and proper use of the product, how to maintain and clean it. Use of the product not in accordance with the rules of the instructions for use can risk serious complications. The instruction should be kept in an easily accessible place.

The TIMAGO ERGOTIM cushion is made of polyurethane foam and comes with a zippered waterproof, vapor-permeable cover.

The cushion is recommended for use in a wheelchair, armchair, chair, or car. It provides comfort, even weight distribution, and free airflow, helping to prevent pressure sores, hemorrhoids, and varicose veins. It is ideal for everyday use and travel.

Do not use the device if it is not compatible with the wheelchair.

Do not use the product other than its intended use.

Do not use the product near an open flame or on a hot surface. It may seriously injure the user and lead to serious health damage.

The skin at the site of connection should be clean.

It is necessary to regularly check the condition of the patient’s skin.

The position of users should be changed regularly to avoid the formation of sores/wounds.

Do not use sharp objects and equipment that can damage the cover.

The cushion should be matched to the seat size. Maintain high hygiene of the cushion cover: clean and/or wash.

When you receive the shipment with the cushion, open it carefully so as not to damage the cushion.

Lay the cushion on a flat surface and wait for all the deformations caused during transportation to return to its original shape.

The cushion should be fitted to the patient’s seat to fully perform its functions.

Do not wash the foam insert.

Wash the cover after removing the foam insert in a mild detergent at temperatures up to 90°C.

The cover can be sterilized at temperatures up to 120°C.

The cover can be disinfected with up to 60% alcohol solution.

Do not use bleach or chemicals.

Do not chemically clean.

Do not use chemicals containing chlorine.

Drying in an unfolded state is recommended.

Do not allow heavy soiling.

The product should not be exposed to direct sunlight, water or moisture.

If the product is no longer suitable for use, it should be disposed of. Before disposal, the product should be cleaned to eliminate the risk of contamination.

If there are any adverse symptoms resulting from the use of the device, report it to the manufacturer and to the competent authority of the Member State where the user or patient resides.

REF: Reference number

LOT: LOT number

SN: Serial number

!: Note

Manufacturer Symbol: Manufacturer

UDI: Unique device identifications

MD: Medical device

i Symbol: Please read the instruction

Hourglass Symbol: Use by date

Thermometer Symbol (5°C to 35°C): Permissible storage temperature

Umbrella Symbol: Store in a dry place

Sun Symbol: Protect from sunlight

Recycle Symbol: Packaging is recyclable

Person dropping item in bin Symbol: The packaging should be disposed of in the trash

CE: The manufacturer checked for compliance with essential medical devices requirements.