STORZ & BICKEL VENTY EA1045UR (02) PDF Document

When using and servicing your STORZ & BICKEL VENTY EA1045UR, always follow these basic rules:

• SAVE THESE INSTRUCTIONS. These instructions are an integral part of the Vaporizer and must be made available to the user.

• Read the instructions carefully and completely before operating the Vaporizer and USB-C Cable.

• This Vaporizer may only be used by adults. Persons with reduced physical, sensory or mental abilities, or lack of experience and knowledge, should not use the Vaporizer unless they have been given supervision or instruction concerning use of the Vaporizer in a safe way and understand the hazards involved.

• If you suffer from a respiratory tract or lung disease, the device may only be used after consultation and with the consent of the treating physician. Depending on their density, the vapors may irritate the respiratory tract and lungs, which may cause coughing.

• Do not leave the Vaporizer unattended while it is being operated.

• Store and use the Vaporizer and USB-C Cable only at a sufficient distance from heat sources (oven, stove, fireplace, etc.) and in a dry place where the ambient temperature cannot drop below +5 °C (+41 °F).

• Do not expose the Vaporizer to extreme fluctuations in ambient temperature. Condensation humidity could interfere with the functionality.

• Only use original Storz & Bickel accessories and spare parts.

• Do not use the Vaporizer and USB-C Cable in an inappropriate, incorrect or unreasonable manner, as the manufacturer does not accept any responsibility for any damage resulting from this.

To mitigate the risk of injury due to electric shock with your STORZ & BICKEL VENTY EA1045UR, please adhere to the following:

• The Vaporizer and USB-C Cable must be switched off and disconnected from the power supply after use, before any maintenance work, and during thunderstorms.

• Make sure that the USB-C Cable is not damaged by bending, crushing, or pulling.

• Do not use multiple sockets and/or extension cables.

• Do not use the Vaporizer and USB-C Cable if they are damaged. Repairs may only be carried out by our Service Center.

• The Vaporizer and USB-C Cable must not be exposed to moisture and humidity.

• Keep the Vaporizer and USB-C Cable away from pets (e.g., rodents) and pests.

• Do not use the Vaporizer and USB-C Cable in a potentially explosive or flammable atmosphere.

• WARNING: To charge the Battery, use only the detachable Power Adapter available for the device: Model EA1045UR, manufactured by EDAC.

To prevent injury from burning or vapors, follow these guidelines:

• Do not touch hot surfaces of the Vaporizer (Filling Chamber and area around the Filling Chamber) during operation and the cooling phase.

• Place the hot Vaporizer only on a solid and heat-resistant surface and make sure that it is not covered by any objects.

• Do not use the Vaporizer near inflammable objects such as curtains, tablecloths, or paper.

• Do not close, cover, or obstruct the openings of the Vaporizer during operation and the cooling phase.

• Before switching on the Vaporizer, ensure that all vapors, e.g., from flammable cleaning agents and disinfectants, have evaporated.

Be aware of the following risks and take the necessary precautions:

• The packaging material (plastic bags, polystyrene parts, boxes, etc.) must be kept out of the reach of children as it is a potential source of danger.

• Be careful that small parts of the Vaporizer are not swallowed.

• Be aware of the danger of strangulation through the USB-C Cable.

• Only use the Vaporizer with the recommended herbs and plant parts to be vaporized.

• Monitor your symptoms (e.g., cough, shortness of breath, chest pain) during or after the usage and promptly seek medical attention if you have concerns about your health.

Storage

Store the Vaporizer and USB-C Cable in a dry place away from the elements and out of reach of children or unqualified persons.

Disposal

Dispose of an irreparable Vaporizer after the warranty period via the material cycle or send it to our Service Center.

The STORZ & BICKEL VENTY EA1045UR has several functional elements:

Power Button: For switching on/off, press for at least 1/2 sec. each time. Press for 10 seconds to reset to default settings.

Bluetooth Symbol: If not visible, Bluetooth is turned off.

Plus Button: Press briefly to increase temperature in 1-degree intervals. Press and hold for continuous temperature increase. Press plus and minus simultaneously to change the degree display from Celsius to Fahrenheit and vice versa.

USB-C Charging Socket: For charging the battery. To ensure optimal performance, use the original USB-C Supercharger (REF 11 47).

Minus Button: Press briefly to decrease temperature in 1-degree steps. Press and hold for continuous temperature decrease. Press plus and minus simultaneously to change the degree display from Celsius to Fahrenheit and vice versa.

Battery Display: For a full battery, it displays all six charge status fields. When the battery is almost empty, it shows a slowly flashing battery frame.

Temperature Display: Adjustable between 40 °C and 210 °C (104 °F and 410 °F). There are three preset temperatures:

• Base Temperature: 180 °C (356 °F).

• Booster Temperature: +15 °C (+27 °F) offset to Base Temperature; deactivates after 90s.

• Superbooster Temperature: +15 °C (+27 °F) offset to Booster Temperature; deactivates after 90 s.

Filling Chamber: Do not touch when hot.

Mouthpiece: Foldable.

Setting Wheel for Airflow: Adjusts airflow.

Cooling Unit: Unscrew and remove to fill the Filling Chamber.

Follow these steps to operate your STORZ & BICKEL VENTY EA1045UR:

1. Charge the Vaporizer. To ensure optimal performance, use the original USB-C Supercharger.

2. Unscrew the Cooling Unit from the Vaporizer by turning it 90° counterclockwise.

3. Fill the Filling Chamber completely with crushed plant material up to the rim.

4. Screw the Cooling Unit onto the Vaporizer by turning 90° clockwise.

5. Switch on the Vaporizer. It is ready for operation when the temperature displays in green display light.

6. Use the Vaporizer.

The Cooling Unit of the STORZ & BICKEL VENTY EA1045UR consists of the following parts:

1. Rotary Cap

2. Mouthpiece

3. Mouthpiece Seal Ring

4. Cooling Unit Cap

5. Setting Wheel for Airflow

6. Cooling Unit Screen

7. Cooling Unit Base

8. Screen (coarse mesh width)

9. Cooling Unit Bottom Seal Ring

Disassembling the Cooling Unit:

1. Pull the Mouthpiece out of the Cooling Unit Cap while slightly tilting it back and forth. Pull off the Mouthpiece Seal Ring using the recess.

2. Put the edge of the Mouthpiece into the notch of the Rotary Cap and turn it counterclockwise to open and pull out. Pull off the Seal Ring from the Rotary Cap using the recess.

3. Pull the Cooling Unit Cap off the Vaporizer.

4. Pull out the Screen inside the Cooling Unit.

5. Use the Filling Chamber Tool to press the Setting Wheel out of the Cooling Unit.

6. Unscrew the Cooling Unit Base from the Vaporizer by turning it 90° counterclockwise.

7. Lever out the large Base Seal Ring with the Filling Chamber Tool at the recess in the groove.

8. Carefully press out the Screen from above using a cotton swab.

Cleaning the Cooling Unit:

Place all parts of the Cooling Unit in warm rinsing water. Alternatively, soak all parts of the Cooling Unit in isopropyl alcohol for a maximum of 1/2 hour. Rinse all parts under running water for at least one minute. Let all parts dry completely.