Free English STORZ & BICKEL MIGHTY (03) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD STORZ & BICKEL MIGHTY (03) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I get started with my STORZ & BICKEL MIGHTY vaporizer?
Please follow these steps to begin using your STORZ & BICKEL MIGHTY vaporizer:
1. Charge Vaporizer before use.
2. Remove Cooling Unit (with Mouthpiece).
3. Fill Filling Chamber with ground herbs.
4. Re-mount Cooling Unit (with Mouthpiece).
5. Switch on the Vaporizer using the ON/OFF switch. The device is ready to use when the actual temperature has reached the set temperature.
6. Inhale from the Mouthpiece.
Refer to the Instructions for Use for important safety and user advice. Do not operate the device without first reading and understanding the Instructions for Use!
How do I dismantle the Cooling Unit on my STORZ & BICKEL MIGHTY for cleaning or replacing parts?
To dismantle the Cooling Unit of your STORZ & BICKEL MIGHTY, please follow these steps:
1. Pull the Cap Lock towards the Mouthpiece.
2. Pull the Cooling Unit Cap off the Vaporizer.
3. Pull the Mouthpiece out of the Cooling Unit Cap.
4. Unscrew the Cooling Unit Base from the Vaporizer.
5. Lever out the large Base Seal Ring with the Filling Chamber Tool.
6. Press out the Screen.
Refer to the Instructions for Use for important safety and user advice. Do not operate the device without first reading and understanding the Instructions for Use!
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD STORZ & BICKEL MIGHTY (03) PDF DOCUMENT