SONY BRAVIA KD-65X80K (03) PDF Document

To open the Help Guide on your SONY BRAVIA KD-65X80K, press the Input button on the remote control and select Help. If Help does not exist, select Edit and add Help.

To prevent your SONY BRAVIA KD-65X80K from toppling, take the following measures:

1. Secure the stand for the SONY BRAVIA KD-65X80K. Use two angle braces (not supplied) to secure the stand. Attach one side of the angle brace to the wall stud and the other side to the stand.

2. Secure the SONY BRAVIA KD-65X80K to the stand. Use M6 machine screws (not supplied) to screw into the TV rear cover and use a screw or similar (not supplied) to attach it to the stand. Use a rope or chain (not supplied) that is strong enough to support the weight of the TV. Make sure there is no excess slack in the rope or chain.

3. Anchor the SONY BRAVIA KD-65X80K to the wall. Use bolts, a wall anchor, and a chain (or rope) to anchor the unit.

The wall mount hole pattern for the SONY BRAVIA KD-65X80K is 300 x 300 mm.

If you encounter issues such as a black screen, no sound, frozen picture, or network loss on your SONY BRAVIA KD-65X80K, perform the following steps:

1. Restart your SONY BRAVIA KD-65X80K by pressing the power button on the remote control for about five seconds. The TV will restart.

2. If the TV does not recover, try unplugging the AC power cord. Then press the power button on the TV and release it. Wait for two minutes, and plug in the AC power cord.

3. Alternatively, press the power button on the TV for about 40 seconds until the TV turns off.

4. Refer to the Help menu on your screen.

5. Connect your SONY BRAVIA KD-65X80K to the Internet and perform a software update.

6. Perform a factory data reset.

Warning: Resetting your SONY BRAVIA KD-65X80K will clear all customized settings, including the parental lock setting.

Method 1: You can reset the SONY BRAVIA KD-65X80K to factory settings by selecting Factory data reset in the menu. Refer to the online Help Guide for details on how to navigate to this setting.

Method 2: To force a factory data reset, unplug the AC power cord. Press and hold the power button on the SONY BRAVIA KD-65X80K, then plug in the AC power cord while continuing to hold the button.

If you have forgotten the parental lock password on your SONY BRAVIA KD-65X80K, enter 4357 for the PIN and then enter your new PIN.

When you plug in the SONY BRAVIA KD-65X80K, it may not turn on for a while, even if you press the power button on the remote control or the TV. It takes time to initialize the system. Wait for about one minute and then operate it again.

For the SONY BRAVIA KD-65X80K, point your remote control directly at the IR sensor located on your TV. Ensure no objects are blocking the path between the remote control and the IR sensor. If you experience issues, ensure batteries are correctly inserted or replace them.

To enable the built-in microphone on your SONY BRAVIA KD-65X80K, press the Google Assistant button on the remote control and follow the on-screen instructions.

When handling the SONY BRAVIA KD-65X80K, ensure that you disconnect all cables before carrying it. Two or more persons are needed to transport the SONY BRAVIA KD-65X80K, and correct hand placement while carrying the unit is very important for safety and to avoid damage.

The following table provides specifications for the SONY BRAVIA KD-65X80K: