Free English CANON EOS REBEL SL1 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD CANON EOS REBEL SL1 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the basic features of the CANON EOS REBEL SL1?
The CANON EOS REBEL SL1 is a digital single-lens reflex camera featuring a fine-detail CMOS sensor with approximately 18.0 effective megapixels, DIGIC 5, high-precision and high-speed 9-point AF, approximately 4 fps continuous shooting, Live View shooting, and Full High Definition (Full HD) movie shooting.
To avoid botched pictures and accidents when using the CANON EOS REBEL SL1, first read the “Safety Precautions” and “Handling Precautions” sections of the manual.
How can I become more familiar with the CANON EOS REBEL SL1 while using this manual?
While reading this manual, take a few test shots with the CANON EOS REBEL SL1 and see how they come out. You can then better understand the camera.
What should I do after shooting with the CANON EOS REBEL SL1 to test the camera before use and to avoid liability in case of failure?
After shooting with the CANON EOS REBEL SL1, play images back and check whether they have been properly recorded. If the camera or memory card is faulty and the images cannot be recorded or downloaded to a computer, Canon cannot be held liable for any loss or inconvenience caused.
What are the compatible memory cards for the CANON EOS REBEL SL1?
The CANON EOS REBEL SL1 can use the following cards regardless of capacity:
SD memory cards
SDHC memory cards
SDXC memory cards
UHS-I cards are supported.
What type of memory card should be used when shooting movies with the CANON EOS REBEL SL1?
When shooting movies with the CANON EOS REBEL SL1, use a large-capacity SD card rated SD Speed Class 6 or higher. If you use a slow-writing card when shooting movies, the movie may not be recorded properly. Also, if you play back a movie on a card with a slow reading speed, the movie may not play back properly. If you want to shoot still photos while shooting a movie, you will need an even faster card.
What items should be checked on the Item Check List for the CANON EOS REBEL SL1 before starting?
Before starting, check that all the following items have been included with your CANON EOS REBEL SL1 camera. If anything is missing, contact your dealer:
Camera (with eyecup and body cap)
Battery Pack LP-E12 (with protective cover)
Battery Charger LC-E12/LC-E12E* (The LC-E12E comes with a power cord.)
Wide Strap
Interface Cable
If you purchased a Lens Kit, check that the lenses are included. Depending on the Lens Kit type, lens instruction manuals may also be included.
What are the included instruction manuals and CD-ROMs with the CANON EOS REBEL SL1?
The instruction manual consists of a booklet (Camera Basic Instruction Manual) and PDF manuals in electronic form provided on the CD-ROM disc.
The Camera Instruction Manual CD-ROM contains the following instruction manuals in PDF:
Camera Instruction Manual (Detailed version)
Quick Reference Guide
Lens Instruction Manual
The EOS DIGITAL Solution Disk (Software CD-ROM) contains software such as image-editing software and software instruction manuals in PDF format.
What are the steps in the Quick Start Guide for the CANON EOS REBEL SL1?
The steps in the Quick Start Guide for the CANON EOS REBEL SL1 are:
1. Insert the battery (To charge the battery, see page 22).
2. Insert a card. With the card’s label facing toward the back of the camera, insert it into the card slot.
3. Attach the lens. Align the lens’ white or red index with the camera’s index in the matching color.
4. Set the lens focus mode switch to
5. Set the power switch to <1>. When the LCD monitor displays the date/time/zone setting screens, see page 29.
6. Set the Mode Dial to (Scene Intelligent Auto). All the necessary camera settings will be set automatically.
7. Focus the subject. Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus the subject. If necessary, the built-in flash will be raised automatically.
8. Take the picture. Press the shutter button completely to take the picture.
9. Review the picture. The captured image will be displayed for 2 sec. on the LCD monitor. To display the image again, press the <> button.
How do I handle the battery and charger for the CANON EOS REBEL SL1?
Tips for Using the Battery and Charger for the CANON EOS REBEL SL1:
Upon purchase, the battery is not fully charged. Charge the battery before use.
Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity.
After recharging the battery, detach it and disconnect the charger from the power outlet.
When not using the camera, remove the battery. If the battery is left in the camera for a prolonged period, a small amount of power current is released, resulting in excess discharge and shorter battery life. Store the battery with the protective cover (provided) attached. Storing the battery when it is fully charged may lower the battery’s performance.
The battery charger can also be used in foreign countries. The battery charger is compatible with a 100 V AC to 240 V AC 50/60 Hz power source. If necessary, attach a commercially-available plug adapter for the respective country or region. Do not attach any portable voltage transformer to the battery charger. Doing so can damage the battery charger.
If the battery becomes exhausted quickly even after being fully charged, the battery has reached the end of its service life. Purchase a new battery.
After disconnecting the charger’s power plug, do not touch the prongs for at least 3 sec.
Do not charge any battery other than a Battery Pack LP-E12. Battery Pack LP-E12 is dedicated to Canon products only. Using it with an incompatible battery charger or product may result in malfunction or accidents for which Canon cannot be held liable.
What are the procedures for installing a battery and card in the CANON EOS REBEL SL1?
Procedures for Installing the Card in the CANON EOS REBEL SL1:
1. Open the cover. Slide the lever as shown by the arrows and open the cover.
2. Insert the battery. Insert the end with the battery contacts. Insert the battery until it locks in place.
3. Insert the card. As shown by the illustration, face the card’s label side toward the back of the camera and insert it until it clicks in place.
4. Close the cover. Press the cover until it snaps shut. When you set the power switch to <1>, the number of possible shots will be displayed on the LCD monitor.
Make sure the card’s write-protect switch is set upward to enable writing/erasing.
What are the procedures for removing the battery and card from the CANON EOS REBEL SL1?
Procedures for Removing the Card from the CANON EOS REBEL SL1:
1. Set the power switch to <2>.
2. Open the cover. Make sure the access lamp is off, then open the cover. If [Recording…] is displayed, close the cover.
3. Remove the battery. Press the battery lock lever as shown by the arrow and remove the battery. To prevent short circuiting of the battery contacts, be sure to attach the provided protective cover.
4. Remove the card. Gently push in the card, then let go to eject it. Pull the card straight out.
5. Close the cover. Press the cover until it snaps shut.
Caution: After opening the card slot/battery compartment cover, be careful not to swing it back further. Otherwise, the hinge may break.
If a card-related error message is displayed on the LCD monitor, remove and reinsert the card. If the error persists, use a different card. If you can transfer all the images on the card to a computer, transfer all the images and then format the card with the camera. The card may then return to normal.
What should I know about the access lamp when removing the battery or card from the CANON EOS REBEL SL1?
When the access lamp on the CANON EOS REBEL SL1 is lit or blinking, it indicates that images are being written to or read by the card, being erased, or data is being transferred. Do not open the card slot/battery compartment cover. Also, never do any of the following while the access lamp is lit or blinking, otherwise it can damage the image data, card, or camera:
Removing the card.
Removing the battery.
Shaking or banging the camera around.
How do I turn on the power and manage the automatic sensor cleaning on the CANON EOS REBEL SL1?
To turn on the power on the CANON EOS REBEL SL1:
<1>: The camera turns on. You can shoot still photos.
<2>: The camera is turned off and does not operate. Set to this position when not using the camera.
Sensor cleaning will be executed automatically whenever you set the power switch to <1> or <2>. During the sensor cleaning, the LCD monitor will display
You can still shoot during sensor cleaning by pressing the shutter button halfway to stop the sensor cleaning and take a picture.
To save battery power, the camera turns off automatically after approximately 30 seconds of non-operation. To turn on the camera again, just press the shutter button halfway.
How is the battery level indicated on the CANON EOS REBEL SL1 when the power is turned on?
When the power is turned on for the CANON EOS REBEL SL1, the battery level will be indicated in one of four levels:
z: Battery level is sufficient.
x: Battery level is low, but the camera can still be used.
c: Battery will be exhausted soon. (Blinks)
n: Recharge the battery.
What is the approximate number of possible shots for the CANON EOS REBEL SL1 based on temperature and flash use?
The approximate number of possible shots for the CANON EOS REBEL SL1:
| Temperature | Room Temperature (23°C / 73°F) | Low Temperatures (0°C / 32°F) |
|---|---|---|
| No Flash | 480 | 420 |
| 50% Flash Use | 380 | 350 |
The figures above are based on a fully-charged Battery Pack LP-E12, no Live View shooting, and CIPA (Camera & Imaging Products Association) testing standards.
How can the number of possible shots for the CANON EOS REBEL SL1 decrease?
The number of possible shots for the CANON EOS REBEL SL1 will decrease with any of the following operations:
Pressing the shutter button halfway for a prolonged period.
Activating the AF frequently without taking a picture.
Using the lens Image Stabilizer.
Using the LCD monitor often.
The number of possible shots may decrease depending on the actual shooting conditions.
The lens operation is powered by the camera’s battery. Depending on the lens used, the number of possible shots may be lower.
For the number of possible shots with Live View shooting, see page 75.
What are the steps to set the Date, Time, and Zone on the CANON EOS REBEL SL1?
Steps to Set the Date, Time, and Zone on the CANON EOS REBEL SL1:
1. Display the menu screen. Press the
2. Under the [52] tab, select [Date/Time/Zone]. Press the
3. Set the time zone. [London] is set by default. Press the .)
4. Set the date and time. Press the .)
5. Set the daylight saving time if necessary. Press the
6. Exit the setting. Press the
If you store the camera without the battery or if the camera’s battery becomes exhausted, the date/time/zone may be reset. If this happens, set the time zone and date/time again.
How do I select the interface language on the CANON EOS REBEL SL1?
Steps to Select the Interface Language on the CANON EOS REBEL SL1:
1. Display the menu screen. Press the
2. Under the [52] tab, select [Language]. Press the
3. Set the desired language. Press the <> cross keys to select the language, then press <0>. The interface language will change.
What are the steps to attach a lens to the CANON EOS REBEL SL1?
Steps to Attach a Lens to the CANON EOS REBEL SL1:
1. Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.
2. Attach the lens. Align the lens’ red or white index with the camera’s index matching the same color. Turn the lens as shown by the arrow until it clicks in place.
3. Set the lens focus mode switch to
4. Remove the front lens cap.
To minimize dust when changing lenses, do it quickly in a place with minimal dust. When storing the camera without a lens attached, be sure to attach the body cap to the camera. Remove dust on the body cap before attaching it.
How do I detach a lens from the CANON EOS REBEL SL1?
To detach a lens from the CANON EOS REBEL SL1:
While pressing the lens release button, turn the lens as shown by the arrows.
Turn the lens until it stops, then detach it.
Attach the rear lens cap to the detached lens.
When attaching or detaching a lens, set the camera’s power switch to <2>.
How can I adjust the viewfinder clarity on the CANON EOS REBEL SL1?
To adjust the viewfinder clarity on the CANON EOS REBEL SL1, turn the dioptric adjustment knob. Turn the knob left or right so that the AF points (nine boxes) in the viewfinder look sharp.
What is the recommended way to hold the CANON EOS REBEL SL1 for sharp images?
To obtain sharp images with the CANON EOS REBEL SL1, hold the camera still to minimize camera shake. The recommended procedure is:
1. Wrap your right hand around the camera grip firmly.
2. Hold the lens bottom with your left hand.
3. Rest your hand’s right index finger lightly on the shutter button.
4. Press your arms and elbows lightly against the front of your body.
5. To maintain a stable stance, place one foot slightly ahead of the other.
6. Press the camera against your face and look through the viewfinder.
How does the two-step shutter button work on the CANON EOS REBEL SL1?
The shutter button on the CANON EOS REBEL SL1 has two steps. You can press the shutter button halfway, which activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting is displayed in the viewfinder. Then you can further press the shutter button completely, which releases the shutter and takes the picture.
If you press the shutter button completely without pressing it halfway first, or if you press the shutter button halfway and then press it completely immediately, the camera will take a moment before it takes the picture.
Even during menu display, image playback, or image recording, you can instantly go back to shooting-ready by pressing the shutter button halfway.
How can I prevent camera shake when shooting with the CANON EOS REBEL SL1?
To prevent camera shake when shooting with the CANON EOS REBEL SL1:
Hold and steady the camera as shown in the instructions.
Press the shutter button halfway to autofocus, then slowly press the shutter button completely.
How do I use the Quick Control screen on the CANON EOS REBEL SL1?
To use the Quick Control screen on the CANON EOS REBEL SL1:
1. Press the button. The Quick Control screen will appear.
2. Set the desired function. Press the <> cross keys to select a function. The selected function and Feature guide will appear. Turn the <6> dial to change the setting.
3. Take the picture. Press the shutter button completely to take the picture. The captured image will be displayed.
In steps 1 and 2, you can also use the LCD monitor’s touch screen.
How do I set a desired function using the Function Setting Screen on the CANON EOS REBEL SL1’s Quick Control?
To set a desired function using the Function Setting Screen on the CANON EOS REBEL SL1’s Quick Control:
Select the desired function and press <0>. The function’s setting screen will appear.
Press the
Press <0> to finalize the setting and return to the Quick Control screen.
How do I operate the menus on the CANON EOS REBEL SL1 using the LCD monitor?
To operate the menus on the CANON EOS REBEL SL1 using the LCD monitor, use the
What is the Menu Setting Procedure on the CANON EOS REBEL SL1?
The Menu Setting Procedure on the CANON EOS REBEL SL1 is:
1. Display the menu screen. Press the
2. Select a tab. Press the
3. Select the desired item. Press the
4. Select the setting. Press the
5. Set the desired setting. Press <0> to set it.
6. Exit the setting. Press the
In steps 2 to 5, you can also use the LCD monitor’s touch screen.
To cancel, press the
When should I format the card on the CANON EOS REBEL SL1?
Execute [Format card] on the CANON EOS REBEL SL1 in the following cases:
The card is new.
The card was formatted by a different camera or a computer.
The card is full with images or data.
A card-related error is displayed.
When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc., before formatting the card.
How do I perform low-level formatting on the CANON EOS REBEL SL1 card?
For low-level formatting on the CANON EOS REBEL SL1 card, press the
Perform low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase data in the card. Since low-level formatting will format all recordable sectors in the card, the formatting will take slightly longer than normal formatting. You can stop the low-level formatting by selecting [Cancel]. Even in this case, normal formatting will be completed and you can use the card as usual.
How can I switch the LCD monitor display on the CANON EOS REBEL SL1?
To switch the LCD monitor screen on the CANON EOS REBEL SL1, press the button. You can switch as follows: Display the shooting settings screen, turn off the LCD monitor screen, or display the camera settings screen.
When you turn on the power, the shooting settings will be displayed. When your eye is near the viewfinder eyepiece, the display-off sensor will turn off the LCD monitor to prevent glare. When your eye leaves the viewfinder eyepiece, the LCD monitor will turn on again.
Menu Functions appear when you press the
Captured Image appears when you press the <> button. Press the <> button again to return to the shooting settings screen.
How do I disable the Feature Guide on the CANON EOS REBEL SL1?
To disable the Feature Guide on the CANON EOS REBEL SL1:
Select [Feature guide]. Under the [53] tab, select [Feature guide], then press <0>.
Select [Disable], then press <0>.
How can I use the touch screen operations on the CANON EOS REBEL SL1?
To use the touch screen operations on the CANON EOS REBEL SL1, use your finger to tap (touch briefly and then remove your finger from) the LCD monitor. By tapping, you can select menus, icons, etc., displayed on the LCD monitor.
When touch-screen operation is possible, a frame will appear around the icon (except on menu screens). For example, when you tap [Q], the Quick Control screen appears. By tapping [2], you can return to the preceding screen.
Operations possible by tapping the screen include:
Setting menu functions after pressing the
Quick Control
Setting functions after pressing the or button
Setting functions during Live View shooting
Setting functions during movie shooting
Playback operations
How can I use the drag operation by tapping the screen on the CANON EOS REBEL SL1?
To use the drag operation on the CANON EOS REBEL SL1’s screen, slide your finger while touching the LCD monitor.
Operations possible by dragging your finger on the screen include:
Selecting a menu tab or item after pressing the
Setting a scale control
Quick Control
Setting functions during Live View shooting
Setting functions during movie shooting
Playback operations
How can I set the Touch control sensitivity on the CANON EOS REBEL SL1?
To set the Touch control on the CANON EOS REBEL SL1:
1. Select [Touch control]. Under the [53] tab, select [Touch control], then press <0>.
2. Set the Touch control. Select the desired setting, then press <0>.
[Standard] is the normal setting.
[Sensitive] provides a better touch response than [Standard]. Try using both settings and select the one you prefer.
To disable touch-screen operations, select [Disable].
What are the cautions for touch screen operations on the CANON EOS REBEL SL1?
Cautions for Touch Screen Operations on the CANON EOS REBEL SL1:
Since the LCD monitor is not pressure sensitive, do not use any sharp objects, such as your fingernail or a ballpoint pen, for touch operations.
Do not use wet fingers for touch screen operations.
If the LCD monitor has any moisture or if your fingers are wet, the touch screen may not respond or misoperation may occur. In such a case, turn off the power and wipe the LCD monitor with a cloth.
Do not attach any protective sheet (commercially available) or sticker on the LCD monitor. It may make the touch operation response slow.
How can I use the Fully Automatic Shooting (Scene Intelligent Auto) mode on the CANON EOS REBEL SL1?
To use the Fully Automatic Shooting (Scene Intelligent Auto) mode () on the CANON EOS REBEL SL1:
1. Set the Mode Dial to .
2. Aim any AF point over the subject. All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier.
3. Focus the subject. Press the shutter button halfway, and the lens focusing ring will rotate to focus. The dot inside the AF point achieving focus flashes briefly in red. At the same time, the beeper will sound and the focus confirmation light
4. Take the picture. Press the shutter button completely to take the picture. The captured image will be displayed for 2 sec. on the LCD monitor. After you finish shooting, push down the built-in flash with your fingers.
What should I do if the focus confirmation light blinks or the beeper continues to beep softly when using Fully Automatic Shooting on the CANON EOS REBEL SL1?
If the focus confirmation light
If multiple AF points flash simultaneously, this indicates that focus is achieved at all those AF points. When the AF point covering the desired subject flashes, take the picture.
If the beeper continues to beep softly (The focus confirmation light
What should I do if pressing the shutter button halfway does not focus the subject when using Fully Automatic Shooting on the CANON EOS REBEL SL1?
If pressing the shutter button halfway does not focus the subject when using Fully Automatic Shooting on the CANON EOS REBEL SL1, check if the focus mode switch on the lens is set to
Why did the flash fire even though it was daylight when using Fully Automatic Shooting on the CANON EOS REBEL SL1?
For a backlit subject when using Fully Automatic Shooting on the CANON EOS REBEL SL1, the flash may fire to help lighten the subject’s dark areas. There are two ways to disable the flash:
Set the flash setting to [b] (Flash off). If you change the shooting mode or set the power switch to <2>, the setting will revert back to [a] (Auto flash).
Set the Mode Dial to <7> (Flash Off).
What should I do if the picture came out extremely bright when using Fully Automatic Shooting on the CANON EOS REBEL SL1?
If the picture came out extremely bright (overexposure) when using Fully Automatic Shooting on the CANON EOS REBEL SL1, move further from the subject and shoot. When shooting flash photography, if the subject is too close to the camera, the picture may come out extremely bright.
Why did the built-in flash fire a series of flashes when using Fully Automatic Shooting on the CANON EOS REBEL SL1 in low light?
When using Fully Automatic Shooting on the CANON EOS REBEL SL1 in low light, pressing the shutter button halfway may trigger the built-in flash to fire a series of flashes to assist autofocusing. This is called AF-assist beam. Its effective range is approximately 4 meters/13.1 feet.
What should I do if the bottom part of the picture came out unnaturally dark when flash was used with Fully Automatic Shooting on the CANON EOS REBEL SL1?
When flash was used with Fully Automatic Shooting on the CANON EOS REBEL SL1 and the bottom part of the picture came out unnaturally dark, the shadow of the lens barrel was captured because the subject was too close to the camera. Move further from the subject and shoot. If a hood is attached to the lens, remove it before taking the flash picture.
How can I recompose the shot using focus lock in Full Auto Techniques (Scene Intelligent Auto) on the CANON EOS REBEL SL1?
How does AI Servo AF work for shooting a moving subject in Full Auto Techniques (Scene Intelligent Auto) on the CANON EOS REBEL SL1?
How do I start Live View Shooting on the CANON EOS REBEL SL1?
To start Live View Shooting on the CANON EOS REBEL SL1:
1. Display the Live View image on the LCD monitor. Press the <> button. The Live View image will appear on the LCD monitor.
2. Focus the subject. Press the shutter button halfway to focus. When focus is achieved, the AF point will turn green and the beeper will sound.
3. Take the picture. Press the shutter button completely. The picture will be taken and the captured image is displayed on the LCD monitor. After the image review ends, the camera will return to Live View shooting automatically. Press the <> button to end the Live View shooting.
If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended.
What are the number of possible shots with Live View Shooting on the CANON EOS REBEL SL1?
The approximate number of possible shots with Live View Shooting on the CANON EOS REBEL SL1:
| Temperature | No Flash | 50% Flash Use |
|---|---|---|
| Room temperature (23°C / 73°F) | 160 | 150 |
| Low temperatures (0°C / 32°F) | 150 | 140 |
With a fully-charged Battery Pack LP-E12, continuous Live View shooting is possible for approximately 1 hr. 20 min. at room temperature (23°C / 73°F).
How do I use the Disabling Flash mode (<7>) on the CANON EOS REBEL SL1?
The camera analyzes the scene and sets the optimum settings automatically on the CANON EOS REBEL SL1. In places where flash photography is prohibited such as in a museum or an aquarium, use the <7> (Flash Off) mode.
Shooting Tips for Disabling Flash on the CANON EOS REBEL SL1:
Prevent camera shake if the numeric display in the viewfinder blinks. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod. When using a zoom lens, use the wide-angle end to reduce blur caused by camera shake even while handholding the camera.
Take portraits without flash. In low-light conditions, tell the subject to keep still until the picture is taken. Any movement by the subject during shooting may result in the subject being blurred in the picture.
How do I use Creative Auto Shooting () on the CANON EOS REBEL SL1?
To use Creative Auto Shooting (
1. Set the Mode Dial to
2. Press the button. The Quick Control screen will appear.
3. Set the desired function. Press the <> cross keys to select the function. The selected function and Feature guide will appear. Press <0> to set the function. For the setting procedure and details on each function, see page 55.
4. Take the picture. Press the shutter button completely to take the picture.
In the
How can I set Extra Effect Shot in Creative Auto Shooting on the CANON EOS REBEL SL1?
To set Extra Effect Shot in Creative Auto Shooting (
You can select any of the following effects before shooting: Creative filters, Picture Styles, and Ambience-based shots.
Turn the <6> dial to select [ : Enable]. Tap on [2] to return to the Quick Control screen. You can also press <0> and make the selection.
Turn the <6> dial to select a shooting effect.
When you take a picture, two images will be recorded: one with the effect applied and one without. Immediately after you take a picture, both images will be displayed together.
Registering your favorite shooting effects: You can register up to two shooting effects under [9:Favorite effect]. When you select the registered [9:Favorite effect], you can shoot with that shooting effect applied. You can also overwrite the [9:Favorite effect].
You cannot set both (1) Extra Effect Shot and (2) Ambience-based shots at the same time.
You cannot set both (1) Extra Effect Shot and (3) Background blur at the same time.
How can I set Ambience-based shots in Creative Auto Shooting on the CANON EOS REBEL SL1?
To set Ambience-based shots (2) in Creative Auto Shooting (
You can choose the ambience you want to convey in your images.
Turn the <6> dial to select the ambience. You can also select it from a list by pressing <0>.
How can I set Background blur in Creative Auto Shooting on the CANON EOS REBEL SL1?
To set Background blur (3) in Creative Auto Shooting (
If [OFF] is set, the degree of background blur will change depending on the brightness.
If it is set to other than [OFF], you can adjust the background blur regardless of brightness.
If you turn the <6> dial to move the cursor to the right, the background will look sharper.
Turning the <6> dial to move the cursor to the left will blur the subject’s background. Note that depending on the lens’ maximum aperture (f/number), certain slider adjustments may not be selectable (indicated by •).
If you use Live View shooting, you can see how the image is blurred in front of and behind the point of focus. While you turn the <6> dial, [Simulating blur] will be displayed on the LCD monitor.
This function cannot be set if you use flash. If has been set and you set Background blur, will be set automatically.
You cannot set both (1) Extra Effect Shot and (3) Background blur at the same time.
How do I set the Drive/self-timer mode and Flash firing in Creative Auto Shooting on the CANON EOS REBEL SL1?
To set Drive/self-timer mode (4) on the CANON EOS REBEL SL1 in
Use the <6> dial to make the selection. You can also select it from a list by pressing <0>.
Single shooting: Shoot one image at a time.
Continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to approximately 4 shots per second.
Self-timer: 10sec./remote control: The picture is taken 10 seconds after you press the shutter button. A remote controller can also be used.
Self-timer: Continuous: Press the
To set Flash firing (5) on the CANON EOS REBEL SL1 in
Auto flash: The flash fires automatically when necessary.
Flash off: The flash is disabled.
If you have set Extra Effect Shot, cannot be set.
If you have set Background blur, you cannot use flash.
How do I use the Portrait mode (<2>) on the CANON EOS REBEL SL1?
The <2> (Portrait) mode on the CANON EOS REBEL SL1 blurs the background to make the human subject stand out, and it also makes skin tones and hair look softer.
Shooting Tips for Portrait mode on the CANON EOS REBEL SL1:
The further the distance between the subject and background, the better. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background.
Use a telephoto lens. If you have a zoom lens, use the telephoto end to fill the frame with the subject from the waist up. Move in closer if necessary.
Focus the face. Check that the AF point covering the face flashes. For close-ups of the face, focus on the eyes.
The default setting is (Continuous shooting). If you hold down the shutter button, you can shoot continuously to capture subtle changes in the subject’s pose and facial expression (max. approximately 4 shots/sec.).
How do I use the Landscape mode (<3>) on the CANON EOS REBEL SL1?
Use the <3> (Landscape) mode on the CANON EOS REBEL SL1 for wide scenery or to have everything in focus from near to far, for vivid blues and greens, and very sharp and crisp images.
Shooting Tips for Landscape mode on the CANON EOS REBEL SL1:
With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end. It also adds breadth to landscapes.
Shooting night scenes. The <3> mode is also good for night scenes because it disables the built-in flash. Use a tripod to prevent camera shake.
The flash will not fire even in backlit or low-light conditions.
How do I use the Close-up mode (<4>) on the CANON EOS REBEL SL1?
When you want to shoot flowers or small things up close with the CANON EOS REBEL SL1, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately).
Shooting Tips for Close-up mode on the CANON EOS REBEL SL1:
Use a simple background. A simple background makes small objects such as flowers stand out better.
Move as close as possible to the subject. Check the lens for its minimum focusing distance. The lens minimum focusing distance is measured from the
With a zoom lens, use the telephoto end. If you have a zoom lens, using the telephoto end will make the subject look larger.
How do I use the Sports mode (<5>) on the CANON EOS REBEL SL1 for shooting moving subjects?
Use the <5> (Sports) mode on the CANON EOS REBEL SL1 to shoot a moving subject, such as a running person or a moving vehicle.
Shooting Tips for Sports mode on the CANON EOS REBEL SL1:
Use a telephoto lens. The use of a telephoto lens is recommended for shooting from a distance.
Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus confirmation light
The default setting is (Continuous shooting). When you want to take the picture, press the shutter button completely. If you hold down the shutter button, you will be able to maintain autofocusing during continuous shooting of the subject’s movement (max. approximately 4 shots per sec.).
Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display on the bottom left will blink. Hold the camera steady and shoot.
How do I select a shooting mode in the Special Scene Mode (SCN) (<8>) on the CANON EOS REBEL SL1?
To select a shooting mode in the Special Scene Mode (SCN) (<8>) on the CANON EOS REBEL SL1:
1. Set the Mode Dial to <8>.
2. Press the button. The Quick Control screen will appear.
3. Select a shooting mode. Press the <> cross keys to select the desired shooting mode’s icon. Turn the <6> dial to select a shooting mode. You can also select the shooting mode icon and press <0> to display a selection of shooting modes from which you can select one.
Available Shooting Modes in the <8> Mode are:
| Shooting Mode | Page | Shooting Mode | Page |
|---|---|---|---|
| C Kids | p.63 | 6 Night Portrait | p.66 |
| P Food | p.64 | F Handheld Night Scene | p.67 |
| x Candlelight | p.65 | G HDR Backlight Control | p.68 |
How do I use the Shooting Children mode () on the CANON EOS REBEL SL1?
When you want to continuously focus and shoot children running around with the CANON EOS REBEL SL1, use
Shooting Tips for Shooting Children on the CANON EOS REBEL SL1:
Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus confirmation light
Shoot continuously. The default setting is (Continuous shooting). When you want to take the picture, press the shutter button completely. If you hold down the shutter button, you will be able to maintain autofocusing during continuous shooting of the subject’s changing facial expressions and movement (max. approximately 4 shots per sec.).
While the flash is recycling, “DbuSY” is displayed in the viewfinder, and a picture cannot be taken. Take the picture after this display turns off.
How do I use the Shooting Food mode (
) on the CANON EOS REBEL SL1?
When shooting food with the CANON EOS REBEL SL1, use
(Food). The photo will look bright and vivid, making the food look delicious.
Shooting Tips for Shooting Food on the CANON EOS REBEL SL1:
Change the color tone. You can change [Color tone]. Food photos with a reddish tinge usually make the food look more delicious. To increase the food’s reddish tinge, set it toward [Warm tone]. Set it toward [Cool tone] if it looks too red.
Avoid using flash. If you use flash, the light may reflect off the dish or food and results in unnatural shadows. By default, (Flash off) is set. Try to prevent camera shake when shooting in low-light conditions.
Since this mode sets the color tone to make food look delicious, human subjects may be shot in an unsuitable skin tone.
If you use flash, the [Color tone] setting will switch to the default setting.
How do I use the Shooting Candlelight Portraits mode () on the CANON EOS REBEL SL1?
When shooting a human subject in candlelight with the CANON EOS REBEL SL1, use
Shooting Tips for Candlelight Portraits on the CANON EOS REBEL SL1:
Use the center AF point to focus. Aim the center AF point in the viewfinder over the subject, then shoot.
Prevent camera shake if the shutter speed in the viewfinder blinks. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod. When using a zoom lens, use the wide-angle end to reduce blur caused by camera shake even while handholding the camera.
Change the color tone. You can change [Color tone]. To increase the candlelight’s reddish tinge, set it toward [Warm tone]. Set it toward [Cool tone] if it looks too red.
Live View shooting cannot be used.
Flash shooting is not possible. In low light, the AF-assist beam may be emitted.
How do I use the Shooting Night Portraits (With a Tripod) mode (<6>) on the CANON EOS REBEL SL1?
To shoot people at night and obtain a natural-looking night scene in the background with the CANON EOS REBEL SL1, use the <6> (Night Portrait) mode. Using a tripod is recommended.
Shooting Tips for Night Portraits on the CANON EOS REBEL SL1:
Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod to prevent camera shake.
Check the subject’s brightness. Under low light, the built-in flash will fire automatically to obtain a good exposure of the subject. It is recommended to play back the image after the shooting to check the image brightness. If the subject looks dark, move nearer and shoot again.
Also shoot in other shooting modes. Since camera shake is prone to occur with night shots, shooting also with and
Tell the subject to keep still even after the flash fires.
If you use the self-timer together with flash, the self-timer lamp will light up briefly after the picture is taken.
How do I use the Handheld Night Scene mode () on the CANON EOS REBEL SL1?
The
Shooting Tips for Handheld Night Scene on the CANON EOS REBEL SL1:
Hold the camera firmly. While shooting, hold the camera firmly and steadily. In this mode, four shots are aligned and merged into a single image. However, if there is significant misalignment in any of the four shots due to camera shake, they may not align properly in the final image.
For shots of people, turn on the flash. If you want to include people in the night scene shot, press the button to set
How do I use the HDR Backlight Control mode () on the CANON EOS REBEL SL1?
When shooting a scene having both bright and dark areas with the CANON EOS REBEL SL1, use the
Shooting Tips for HDR Backlight Control on the CANON EOS REBEL SL1:
Hold the camera firmly. While shooting, hold the camera firmly and steadily. In this mode, three shots are aligned and merged into a single image. However, if there is significant misalignment in any of the three shots due to camera shake, they may not align properly in the final image.
Flash shooting is not possible. In low light, the AF-assist beam may be emitted.
HDR stands for High Dynamic Range.
What cautions apply to both Night Portrait (<6>) and Handheld Night Scene () on the CANON EOS REBEL SL1?
Cautions for both <6> (Night Portrait) and
During Live View shooting, it may be difficult to focus dots of light such as in a night scene. In such a case, you should set the AF method to [Quick mode] and shoot. If it is still difficult to focus, set the lens’ focus mode switch to
What cautions apply specifically to Handheld Night Scene () on the CANON EOS REBEL SL1?
Cautions for
When shooting flash photography, if the subject is too close to the camera, the picture may come out extremely bright (overexposure).
If you use flash to shoot a night scene with few lights, the shots may not align correctly. This can result in a blurry photo.
If you use flash and the human subject is close to the background that is also illuminated by the flash, the shots may not align correctly. This can result in a blurry photo. Unnatural shadows and unsuitable colors may also appear.
External flash coverage:
When using a Speedlite with automatic flash coverage setting, the zoom position will be fixed to the wide end, regardless of the lens’ zoom position.
If you have to set the flash coverage manually, set it to the wide-angle end.
What cautions apply specifically to HDR Backlight Control () on the CANON EOS REBEL SL1?
Cautions for
Note that the image may not be rendered with a smooth gradation and may look irregular or have significant noise.
HDR Backlight Control may not be effective for excessively backlit scenes or extremely high-contrast scenes.
What cautions apply to both Handheld Night Scene () and HDR Backlight Control () on the CANON EOS REBEL SL1?
Cautions for both
Compared with other shooting modes, the shooting area will be smaller.
RAW+L or RAW cannot be selected. If RAW+L or RAW has been set, L will be set.
If you shoot a moving subject, the subject’s movement may leave afterimages or the surrounding area of the subject may become dark.
The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.), flat or single-tone images, or images significantly misaligned due to camera shake.
Recording the image to the card will take longer than with normal shooting. During the processing of the images, “BUSY” will be displayed and you cannot take another picture until the processing is completed.
If the shooting mode is set to
How can I use Quick Control in Basic Zone modes on the CANON EOS REBEL SL1?
To use Quick Control in Basic Zone modes on the CANON EOS REBEL SL1:
1. Set the Mode Dial to a Basic Zone mode.
2. Press the button. The Quick Control screen will appear.
3. Set the functions. Press the <> cross keys to select a function. (This step is not necessary in the 7 mode.) The selected function and Feature guide will appear. Press the
In the
and
How do I set the movie recording size and frame rate on the CANON EOS REBEL SL1?
The menu option [Z2: Movie rec. size] on the CANON EOS REBEL SL1 enables you to select the movie’s image size [****x****] and frame rate [9] (frames recorded per second). The frame rate switches automatically depending on the [52: Video system] setting.
Image Size options:
[1920×1080]: Full High-Definition (Full HD) recording quality. The aspect ratio will be 16:9.
[1280×720]: High-Definition (HD) recording quality. The aspect ratio will be 16:9.
[640×480]: Standard-definition recording quality. The aspect ratio will be 4:3.
Frame Rate options (fps: frames per second):
6/8: For areas where the TV format is NTSC (North America, Japan, Korea, Mexico, etc.).
5/7: For areas where the TV format is PAL (Europe, Russia, China, Australia, etc.).
4: Mainly for motion pictures.
What is the Total Movie Recording Time and File Size Per Minute for different movie recording sizes on the CANON EOS REBEL SL1?
Total Movie Recording Time and File Size Per Minute for the CANON EOS REBEL SL1:
| Movie Recording Size | Total Recording Time (approx.) | File Size (approx.) | ||
|---|---|---|---|---|
| 4 GB Card | 8 GB Card | 16 GB Card | ||
| [1920×1080] | 11 min. | 22 min. | 44 min. | 330 MB/min. |
| [1280×720] | 11 min. | 22 min. | 44 min. | 330 MB/min. |
| [640×480] | 46 min. | 1 hr. 32 min. | 3 hr. 4 min. | 82.5 MB/min. |
What happens when shooting movies on the CANON EOS REBEL SL1 exceeds 4 GB or the Movie Shooting Time Limit?
For Movie Files Exceeding 4 GB on the CANON EOS REBEL SL1:
Even if you shoot a movie exceeding 4 GB, you can keep shooting without interruption. Approximately 30 sec. before the movie reaches the 4 GB file size, the elapsed shooting time displayed in the movie shooting screen will start blinking. If you keep shooting until the movie file size exceeds 4 GB, a new movie file will be created automatically and the elapsed shooting time or time code will stop blinking. When you play back the movie, you will have to play each movie file individually. Movie files cannot play back consecutively automatically. After the movie playback ends, select the next movie to be played.
Movie Shooting Time Limit on the CANON EOS REBEL SL1:
The maximum recording time of one movie clip is 29 min. 59 sec. If the movie shooting time reaches 29 min. 59 sec., the movie shooting will stop automatically. You can start shooting a movie again by pressing the <> button. (A new movie file starts being recorded.)
An increase of the camera’s internal temperature may cause movie shooting to stop before the maximum recording time shown in the table.
How do I play back an image on the CANON EOS REBEL SL1?
To play back an image on the CANON EOS REBEL SL1:
1. Play back the image. Press the <> button. The last captured image or last image played back will appear.
2. Select an image. To view images starting with the last image, press the <> key. To view images starting with the first (oldest) image, press the <> key. Each time you press the button, the display format will change.
3. Exit the image playback. Press the <> button to exit the image playback and return to the shooting settings display.
To erase an image, press the
How can I search for images quickly using the Index Display on the CANON EOS REBEL SL1?
To search for images quickly using the index display showing 4, 9, 36, or 100 images on one screen with the CANON EOS REBEL SL1:
1. Play back the image. When you press the <> button, the last image captured will be displayed.
2. Switch to the index display. Press the <> button. The 4-image index display will appear. The selected image is highlighted in an orange frame. Pressing the <> button will switch the display from 9 images to 36 images and then to 100 images. Pressing the <> button will switch the display from 100 images to 36 images to 9 images to 4 images and then to 1 image.
3. Select an image. Press the <> cross keys to move the orange frame to select an image. Turning the <6> dial will display image(s) on the next or previous screen. Press <0> in the index display to display the selected image as a single image.
How can I use the Magnified View on the CANON EOS REBEL SL1 during image playback?
To use the Magnified View on the CANON EOS REBEL SL1 during image playback:
1. Magnify the image. Press the <> button during image playback. The image will be magnified. If you hold down the <> button, the image will be magnified until it reaches the maximum magnification. Press the <> button to reduce the magnification. If you hold down the <> button, the magnification will be reduced to the single-image display.
2. Scroll around the image. Use the <> cross keys to scroll around the magnified image. To exit magnified view, press the <> button and the single-image display will reappear.
In magnified view, you can turn the <6> dial to view another image at the same magnification.
The image cannot be magnified during the image review immediately after shooting. A movie cannot be magnified.
How can I use touch screen playback operations on the CANON EOS REBEL SL1?
To use touch screen operations for playback on the CANON EOS REBEL SL1:
Browsing Images (Swipe with one finger):
With single-image display, touch the LCD monitor with one finger. You can browse to the next or previous image by swiping your finger to the left or right. Swipe to the left to see the next (newer) image or swipe to the right to see the previous (older) image.
With index display, also touch the LCD monitor with one finger. You can browse to the next or previous screen by swiping your finger up or down. Swipe up to see the next (newer) images or swipe down to see the previous (older) images. When you select an image, the orange frame will appear. Tap the image again to display it as a single image.
Jumping through Images (Jump Display) (Swipe with two fingers):
Touch the LCD monitor with two fingers. When you swipe two fingers to the left or right, you can jump through images with the method set in [Image jump w/6] under the [x2] tab.
Reducing Image (Index Display) (Pinch two fingers):
Touch the screen with two fingers spread apart, and pinch your fingers together on the screen. Each time you pinch your fingers, the single-image display will change to the index display. When you select an image, the orange frame will appear. Tap the image again to display it as a single image.
Magnifying Image (Spread two fingers apart):
Touch the screen with two fingers together, then spread your fingers apart on the screen. As you spread your fingers, the image will be magnified. The image can be magnified up to 10x. You can scroll around the image by dragging your finger. To reduce the image, pinch your fingers together on the screen. Tapping the [2] icon will return to the single-image display.
How do I play back movies on the CANON EOS REBEL SL1?
To play back movies on the CANON EOS REBEL SL1:
1. Play back the image. Press the <> button to display an image.
2. Select a movie. Press the <> keys to select a movie. In the single-image display, the <> icon displayed on the upper left of the screen indicates a movie. If the movie is a video snapshot, [] will be displayed. In the index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played from the index display, press <0> to switch to the single image display.
3. In the single-image display, press
The movie playback panel will appear at the bottom of the screen.
4. Play back the movie. Select [7] (Play), then press <0>. The movie will start playing. You can pause the movie playback by pressing <0>. You can adjust the sound volume by turning the <6> dial even during movie playback.
With a fully-charged Battery Pack LP-E12, the continuous playback time at room temperature (23°C/73°F) will be as follows: approximately 2 hr. 30 min.
What are the functions available on the Movie Playback Panel for the CANON EOS REBEL SL1?
Movie Playback Panel Operations and Descriptions for the CANON EOS REBEL SL1:
| Operation | Playback Description |
|---|---|
| Play | Pressing <0> toggles between play and stop. |
| Slow motion | Adjust the slow motion speed by pressing the <> keys. The slow-motion speed is indicated at the upper right of the screen. |
| First frame | Displays the movie’s first frame. |
| Previous frame | Each time you press <0>, the previous frame is displayed. If you hold down <0>, it will rewind the movie. |
| Next frame | Each time you press <0>, the movie will play frame-by frame. If you hold down <0>, it will fast forward the movie. |
| Last frame | Displays the movie’s last frame. |
| Background music* | Plays back a movie with the selected background music. |
| Edit | Displays the editing screen. |
| Playback position | |
| mm’ ss” | Playback time (minutes:seconds) |
| Volume | You can adjust the built-in speaker’s volume by turning the <6> dial. |
| MENU | Pressing the |
* When background music is set, the movie’s sound will not be played.
How do I view the Camera Instruction Manual on the CD-ROM for the CANON EOS REBEL SL1 on a computer?
To view the instruction manuals (PDF files) from the Camera Instruction Manual CD-ROM for the CANON EOS REBEL SL1 on a computer, Adobe Reader 6.0 or higher must be installed:
1. Insert the “CAMERA INSTRUCTION MANUAL” CD-ROM into your computer.
2. Double-click the CD-ROM icon. For Windows, the icon is displayed in [(My) Computer]. For Macintosh, the icon is displayed on the desktop.
3. Double-click the START file.
4. Click your language.
5. Click the instruction manual you want to read. The instruction manual will be displayed.
The Camera Instruction Manual CD-ROM contains:
Camera Instruction Manual: Explains all the camera functions and procedures, including basic content.
Quick Reference Guide: Explains basic camera functions settings and basic shooting and playback procedures.
Lens Instruction Manual: If you purchased the lens kit, read this manual before use.
How can I download images using the provided interface cable to connect the CANON EOS REBEL SL1 to a computer?
To download images by connecting the CANON EOS REBEL SL1 to a computer:
1. Install the software.
2. Use the provided interface cable to connect the camera to your computer. Use the interface cable provided with the camera. Connect the cable to the camera’s
3. Use EOS Utility to download the images. For details, refer to the EOS Utility Instruction Manual.
How can I download images using a card reader for the CANON EOS REBEL SL1?
To download images using a card reader for the CANON EOS REBEL SL1:
1. Install the software.
2. Insert the card into the card reader.
3. Use Canon software to download the images.
Use Digital Photo Professional.
Use ImageBrowser EX.
When downloading images from the camera to your computer using a card reader without using Canon software, copy the DCIM folder on the card to your computer.
What software is contained on the EOS DIGITAL Solution Disk for the CANON EOS REBEL SL1?
Software on the EOS DIGITAL Solution Disk for the CANON EOS REBEL SL1:
EOS Utility: With the camera connected to a computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer. You can also use this software to set various camera settings and shoot remotely with the computer connected to the camera. Also, you can copy background music tracks, such as EOS Sample Music*, to the card.
Digital Photo Professional: This software is recommended for users who mainly shoot RAW images. You can quickly view, edit, process and print RAW images. You can also edit JPEG images while retaining the original images.
Picture Style Editor: You can edit Picture Styles and create and save original Picture Style files. This software is aimed at advanced users who are experienced in processing images.
ImageBrowser EX: Connect to the Internet to download and install the software. This software is recommended for users who mainly shoot JPEG images. You can easily view and play back still photos, MOV movies, and video snapshot albums and also print JPEG images.
EOS DIGITAL Solution Disk is necessary for downloading and installing ImageBrowser EX.
How do I install the software from the EOS DIGITAL Solution Disk for the CANON EOS REBEL SL1?
To install the software from the EOS DIGITAL Solution Disk for the CANON EOS REBEL SL1:
1. Insert the EOS DIGITAL Solution Disk into your computer. For Macintosh, double-click to open the CD-ROM icon displayed on the desktop, then double-click on [setup].
2. Click [Easy Installation] and follow the on-screen instructions to install.
If the “Microsoft Silverlight” installation prompt is displayed during installation, install “Microsoft Silverlight”.
3. Click [Restart] and remove the CD-ROM after the computer restarts. When the computer has restarted, the installation is complete.
Do not connect the camera to your computer before you install the software. The software will not be installed correctly.
For software other than ImageBrowser EX, if a previous version is installed, follow the steps below to reinstall the software. The newer version will overwrite the previous version.
How do I view the Software Instruction Manuals contained on the EOS DIGITAL Solution Disk for the CANON EOS REBEL SL1?
To view the software instruction manuals (PDF files) from the EOS DIGITAL Solution Disk for the CANON EOS REBEL SL1:
1. Insert the EOS DIGITAL Solution Disk into your computer.
2. Close the install screen. When the EOS DIGITAL Solution Disk install screen appears, close the install screen.
3. Open the CD-ROM.
4. Open the [Manual] folder.
5. Copy the [English] folder to your computer. Instruction Manual PDFs with the names below are copied.
| Function | Windows | Macintosh |
|---|---|---|
| EOS Utility | EUx.xW_E_xx | EUx.xM_E_xx |
| Digital Photo Professional | DPPx.xW_E_xx | DPPx.xM_E_xx |
| Picture Style Editor | PSEx.xW_E_xx | PSEx.xM_E_xx |
Instruction manual for ImageBrowser EX (ImageBrowser EX User Guide) is included in the software.
6. Double-click the copied PDF file. Adobe Reader (most recent version recommended) must be installed on your computer.
What precautions should be followed regarding safety when using the CANON EOS REBEL SL1?
Warnings to follow for the CANON EOS REBEL SL1 to prevent fire, excessive heat, chemical leakage, explosions, and electrical shock:
Do not use any batteries, power sources, or accessories not specified in the Instruction Manual. Do not use any home-made or modified batteries.
Do not short-circuit, disassemble, or modify the battery. Do not apply heat or solder to the battery. Do not expose the battery to fire or water. Do not subject the battery to strong physical shock.
Do not insert the battery’s plus and minus ends incorrectly.
Do not recharge the battery in temperatures outside the allowable ambient temperature range. Also, do not exceed the recharging time indicated in the Instruction Manual.
Do not insert any foreign metallic objects into the electrical contacts of the camera, accessories, connecting cables, etc.
When disposing of a battery, insulate the electrical contacts with tape to prevent contact with other metallic objects or batteries. This is to prevent a fire or an explosion.
If excessive heat, smoke, or fumes are emitted when recharging the battery, immediately unplug the battery charger from the power outlet to stop recharging. Otherwise, it may cause a fire, heat damage or electrical shock.
If the battery leaks, changes color, deforms, or emits smoke or fumes, remove it immediately. Be careful not to get burned in the process. It may cause a fire, electrical shock or skin burn if you keep using it.
Prevent any battery leakage from contacting your eyes, skin, and clothing. It can cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or clothing, flush the affected area with lots of clean water without rubbing it. See a physician immediately.
Do not leave any cords near a heat source. It can deform the cord or melt the insulation and cause a fire or electrical shock.
Do not hold the camera in the same position for long periods of time. Even if the camera does not feel too hot, prolonged contact with the same body part may cause skin redness, blistering or low-temperature contact burns. Using a tripod is recommended for people with circulation problems or very sensitive skin, or when using the camera in very hot places.
Do not fire the flash at anyone driving a car or other vehicle. It may cause an accident.
Do not fire the flash near a person’s eyes. It may impair the person’s vision. When using flash to photograph an infant, keep at least 1 meter/3.3 feet away.
What cautions should be followed regarding physical injury or property damage for the CANON EOS REBEL SL1?
Cautions to follow for the CANON EOS REBEL SL1 to avoid physical injury or property damage:
When the camera or accessories are not in use, make sure to remove the battery and disconnect the power plug from the equipment before storing. This is to prevent electrical shock, excessive heat, fire, or corrosion.
Do not use the equipment where there is flammable gas. This is to prevent an explosion or a fire.
If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts. There is a possibility of an electrical shock.
Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock.
Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision.
Keep equipment out of the reach of children and infants, including when in use. Straps or cords may accidentally cause choking, electrical shock, or injury. Choking or injury may also occur if a child or infant accidentally swallows a camera part or accessory. If a child or infant swallows a part or accessory, consult a physician immediately.
Do not store the equipment in dusty or humid places. Likewise, store the battery with its protective cover attached to prevent short-circuit. This is to prevent a fire, excessive heat, electrical shock, or burn.
Before using the camera inside an airplane or hospital, check if it is allowed. Electromagnetic waves emitted by the camera may interfere with the plane’s instruments or the hospital’s medical equipment.
To prevent a fire and electrical shock, follow the safeguards:
Always insert the power plug all the way in.
Do not handle a power plug with wet hands.
When unplugging a power plug, grasp and pull the plug instead of the cord.
Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord. Also do not twist or tie the cords.
Do not connect too many power plugs to the same power outlet.
Do not use a cord whose wire is broken or insulation is damaged.
Unplug the power plug periodically and clean off the dust around the power outlet with a dry cloth. If the surrounding is dusty, humid, or oily, the dust on the power outlet may become moist and short-circuit the outlet, causing a fire.
Do not connect the battery directly to an electrical outlet or a car’s cigarette lighter outlet. The battery may leak, generate excessive heat or explode, causing a fire, burns or injuries.
A thorough explanation of how to use the product by an adult is required when the product is used by children. Supervise children while they are using the product. Incorrect usage may result in electrical shock or injury.
Do not leave a lens or lens-attached camera in the sun without the lens cap attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
Do not cover or wrap the product with a cloth. Doing so may trap heat within and cause the casing to deform or catch fire.
Be careful not to get the camera wet. If you drop the product in the water or if water or metal get inside the product, promptly remove the battery. This is to prevent a fire and an electrical shock.
Do not use paint thinner, benzene, or other organic solvents to clean the product. Doing so may cause fire or a health hazard.
What cautions should be followed regarding heat and cold for the CANON EOS REBEL SL1?
Cautions for the CANON EOS REBEL SL1:
Do not use or store the product inside a car under the hot sun or near a heat source. The product may become hot and cause skin burns. Doing so may also cause battery leakage or explosion, which will degrade the performance or shorten the life of the product.
Do not carry the camera around when it is attached to a tripod. Doing so may cause injury. Also make sure the tripod is sturdy enough to support the camera and lens.
Do not leave the product in a low-temperature environment for an extended period of time. The product will become cold and may cause injury when touched.
What are the steps to set up Autoexposure Shooting when shooting movies with the CANON EOS REBEL SL1?
Steps for Autoexposure Shooting when shooting movies with the CANON EOS REBEL SL1 (when the shooting mode is set to other than
1. Set the power switch to
2. Set any shooting mode except .
3. Focus the subject. Before shooting a movie, focus with AF or manual focus. By default, [Movie Servo AF: Enable] is set so that the camera will always focus.
4. Shoot the movie. Press the <> button to start shooting a movie. To stop movie shooting, press <> again. While the movie is being shot, the “o” mark will be displayed on the upper right of the screen.
If you shoot a movie with autoexposure, the shutter speed and aperture will not be recorded in the image information (Exif).
How do I use Movie Servo AF with the CANON EOS REBEL SL1?
For movie shooting with the CANON EOS REBEL SL1, Movie Servo AF focuses continuously by default when set to [Enable].
In Creative Zone modes, you can press the <> button to lock the exposure (AE lock). The exposure setting will be displayed for the number of seconds set with [Z1: Metering timer]. After applying AE lock during movie shooting, you can cancel it by pressing the <> button. (AE lock setting is retained until you press the <> button.)
In Creative Zone modes, you can hold down the <> button and turn the <6> dial to set the exposure compensation.
How can I use shooting with the Touch Shutter on the CANON EOS REBEL SL1?
To use shooting with the Touch Shutter on the CANON EOS REBEL SL1:
1. Display the Live View image. Press the <> button. The Live View image will appear on the LCD monitor.
2. Enable the touch shutter. Tap [y] on the screen’s bottom left. Each time you tap the icon, it will toggle between [y] and [x].
[x] (Touch shutter: Enable): You can focus and shoot by tapping the screen.
[y] (Touch shutter: Disable): You can tap to select where you want to focus. Press the shutter button completely to take the picture.
3. Tap the screen to shoot. Tap the face or subject on the screen. At the point you tap, the camera will focus in the AF method that was set. When [FlexiZone – Multi] is set, it will switch to [FlexiZone – Single]. When focus is achieved, the AF point turns green and the picture is taken automatically. If focus is not achieved, the AF point turns orange and the picture cannot be taken. Tap the face or subject on the screen again.
Even if you set Drive/self-timer to , the camera will still shoot in single shooting mode.
The touch shutter does not work with the magnified view.
To take a bulb exposure, tap the screen twice. The first tap on the screen will start the bulb exposure. Tapping it again will stop the exposure. Be careful not to shake the camera when tapping the screen.