Free English SENNHEISER CHG 4N (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SENNHEISER CHG 4N (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is included in the box with the SENNHEISER CHG 4N?
The package for the SENNHEISER CHG 4N includes the network charger base (either the CHG 2N 2-bay model or the CHG 4N 4-bay model) and a power supply with interchangeable plug adapters for EU, US, UK, and AU regions.
How do I perform the initial setup for the SENNHEISER CHG 4N?
To set up your SENNHEISER CHG 4N charger, follow these steps:
1. For network connectivity, plug an RJ-45 network cable into the corresponding port on the charger.
2. Connect the power supply cable to the power input on the back of the charger.
3. Attach the appropriate regional plug adapter to the power supply unit and plug it into a wall outlet.
How do I charge devices using the SENNHEISER CHG 4N?
To charge your SL Handheld DW or SL Bodypack DW, simply place the device into one of the available charging bays on the SENNHEISER CHG 4N. The charging process will begin automatically.
How do I set up the SENNHEISER CHG 4N for network control?
To enable network features, connect a standard RJ-45 network cable from your network to the port on the back of the SENNHEISER CHG 4N.
How can I reset the network settings on the SENNHEISER CHG 4N?
To reset the network settings on your SENNHEISER CHG 4N, press and hold the reset button, located near the network port, for 1 second.
What do the various LED status indicators on the SENNHEISER CHG 4N mean?
The LED lights on the SENNHEISER CHG 4N provide information about the charging status and device condition. Refer to the table below for a detailed explanation of each LED pattern:
| LED Pattern | Meaning |
|---|---|
| Solid Green | = 100% (Fully charged) |
| Blinking Green | < 100% (Charging) |
| Solid Orange | < 66% (Charging) |
| Blinking Orange | < 33% (Charging) |
| Blinking Red | Error |
| Alternating Green and Orange | Firmware Update (CHG 4N) |
| Alternating Orange lights | Firmware Update (SL Handheld DW / SL Bodypack DW) |
| Alternating Red, Green, and Orange | Not supported transmitter or firmware update required |
Can I control the SENNHEISER CHG 4N remotely?
Yes, the SENNHEISER CHG 4N supports network-based remote control through the Sennheiser Control Cockpit software.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD SENNHEISER CHG 4N (01) PDF DOCUMENT