Free English SENNHEISER CHG 2N (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SENNHEISER CHG 2N (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is included in the box with the SENNHEISER CHG 2N?
The contents of the box for the SENNHEISER CHG 2N include:
• CHG 2N (2 bay Network Charger)
• Power supply unit
• Power cords (with EU, US, UK, and AU plugs)
How do I set up the SENNHEISER CHG 2N charger?
To set up your SENNHEISER CHG 2N, follow these steps:
1. Connect the cable from the power supply unit to the power input socket on the charger. The cable can be routed from the back of the unit or from underneath.
2. Attach the appropriate regional power cord (EU, US, UK, or AU) to the power supply unit.
3. Plug the power cord into a wall outlet.
How do I charge my devices using the SENNHEISER CHG 2N?
To charge your devices, place the SL Handheld DW microphone or the SL Bodypack DW transmitter into one of the available charging bays on the SENNHEISER CHG 2N.
How do I connect the SENNHEISER CHG 2N to a network?
To connect your SENNHEISER CHG 2N to a network, plug a standard RJ-45 network cable into the network port on the back of the charger.
How can I reset the network settings on the SENNHEISER CHG 2N?
To reset the network settings on your SENNHEISER CHG 2N, press and hold the “Reset network settings” button, located next to the network port, for 1 second.
What do the different LED status indicators mean on the SENNHEISER CHG 2N?
The LED lights on the SENNHEISER CHG 2N indicate the charging status and other conditions. Refer to the table below for details:
| LED Display | Meaning |
|---|---|
| Four solid green LEDs | Battery charge is 100% |
| Four pulsing green LEDs | Battery charge is less than 100% |
| Three pulsing yellow LEDs | Battery charge is less than 66% |
| One pulsing red LED | Battery charge is less than 33% |
| Four flashing red LEDs | Error |
| LEDs alternating between yellow and white | Firmware update for the SL Handheld DW / SL Bodypack DW is in progress. |
| LEDs alternating between red and yellow | The inserted transmitter is not supported, or a firmware update is required. |
Can I control the SENNHEISER CHG 2N remotely?
Yes, the SENNHEISER CHG 2N can be controlled remotely over a network using the Sennheiser Control Cockpit software.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD SENNHEISER CHG 2N (01) PDF DOCUMENT