Free English SATISFYER 1 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SATISFYER 1 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I turn on the SATISFYER 1?
Press the button bearing the 4-wave symbol for about 2 seconds to switch the toy on. This activates the SATISFYER 1 at the lowest massage level.
How do I use the SATISFYER 1?
Gently move your labia aside to expose your clitoris. Place the toy’s head onto your clitoris so that your clitoris is situated comfortably inside the hollow. Once you have found the ideal position, you won’t need to move the toy again.
How do I adjust the vibration intensity on the SATISFYER 1?
After it has been switched on, the vibration intensity can be adjusted to meet your preferences. To do this, press the button bearing the 4-wave symbol to increase the intensity, and press the button bearing the 2-wave symbol to reduce the intensity.
You can choose one of 11 different intensity levels.
How do I turn off the SATISFYER 1?
To switch the toy off, press the button bearing the 4-wave symbol for about 2 seconds.
What type of lubricant should I use with the SATISFYER 1?
Using a water-based lubricant will make using the toy even more pleasurable.
Can I use the SATISFYER 1 in water?
Yes. By using the SATISFYER 1 under water (e.g. under the shower or in the bathtub) you can achieve even more intense pulsations.
How do I clean the SATISFYER 1?
The SATISFYER 1 is waterproof and very easy to clean. Even the nozzle can be cleaned easily, using a cotton bud or Q-tip.
For ideal cleaning results, we recommend using a special erotic toy cleaner. Apply the cleaner, briefly allow it to take effect and then dry your erotic toy using a soft, lint-free cloth. Regular cleaning ensures the longevity of your erotic toy.
How should I store the SATISFYER 1?
Do not expose the SATISFYER 1 to direct sunlight and avoid exposure to extreme heat. The product should be stored separately from other toys, in a dust-free environment.
What are the specifications of the SATISFYER 1?
Materials: Silicone, ABS
Storage temperature: 0°C – 60°C
Battery: 2x AAA
Operating time: approx. 120 min
How do I insert batteries into the SATISFYER 1?
The toy is powered using 2 micro AAA batteries. Before using the product for the first time, you must place two batteries inside it.
Open the battery compartment by turning. When placing the batteries inside the toy, please be sure to place the poles of the batteries correctly. If batteries are placed incorrectly, this may impede the product’s function.
What should I do if the SATISFYER 1 is not functioning correctly?
If the product is not functioning correctly or fully, please check the placement of the batteries.
In case of technical difficulties or if the product is not functioning correctly, please press the toy’s button for 5 seconds.
What safety information should I be aware of when using the SATISFYER 1?
Remove any piercings or jewellery in the vicinity of the clitoris before use.
In case of irritated or injured skin, do not use the product. During use, if pain and/or discomfort arise, do not continue using the product.
This product must be stored out of the reach of children.
Do not use or charge the product in case of abnormal heat development and/or mechanical defects, damage or similar issues (discolouration, unusual appearance, deformation, etc.).
Do not burn the product or expose to fire.
Do not open the product using force.
Do not allow sharp objects to damage/puncture the product.
Do not store the product in direct sunlight (e.g. in a car).
In case of fire, do not use water to extinguish the flames.
Do not use the product to stimulate any part of the body for longer than 15 minutes.
Does the SATISFYER 1 contain magnets?
Do not place cards with a magnetic stripe (e.g. credit cards) in the vicinity of the product, as the magnets on the product may damage such cards.
Magnetic fields can affect mechanical and electronic devices such as pacemakers. Do not use the product directly next to a pacemaker.
Is it normal for the SATISFYER 1 motor to heat up?
Yes, it is normal for the motor to heat up during use.
What happens if there is condensation on the SATISFYER 1?
Changes in ambient temperature (e.g. after transport) may cause condensation to form. If condensation occurs, wait several hours for the product to adjust to the new ambient temperature – do not use the product until it has fully adjusted to any such change in temperature.
CLICK HERE TO DOWNLOAD SATISFYER 1 (01) PDF DOCUMENT