Free English SATISFYER PRO 2 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SATISFYER PRO 2 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I turn the SATISFYER PRO 2 on and off?
To turn the SATISFYER PRO 2 on or off, press the power button (indicated by a power symbol circle) for 1 to 2 seconds.
How do I change the vibration modes on the SATISFYER PRO 2?
Once the device is on, you can cycle through the 11 different modes by pressing the (+) button.
How do I charge the SATISFYER PRO 2 and what do the lights indicate?
The device is rechargeable. Use the enclosed USB charging cable. The cable must dock with both magnetic contacts on the metal contact points intended for this purpose.
When the light is flashing, the battery is charging.
When the light remains on (solid), the battery is fully charged.
If the charging cable does not adhere to the contact points by itself, connect it to the electrical supply and wait a moment. The magnetic effect will be reactivated, and the contacts will connect automatically.
How long does it take to charge the SATISFYER PRO 2?
The standard charging time is approximately 1.5 hours. However, the first charge before using the device for the first time can take up to eight hours.
What are the technical specifications of the SATISFYER PRO 2?
| Material | Silicone, ABS |
| Storage Temperature | -5°C – +60°C |
| Maximum Charging Current | 500 mA |
| Battery | Li-Ion 3.7V |
| Battery Capacity | 220 mAh |
| Charging Voltage | 5V |
| Charging Time | Approx. 1.5 h |
| Operating Time | Approx. 90 min |
| Interface | USB |
What safety precautions should I take before using the SATISFYER PRO 2?
Remove piercings or jewellery in the genital area before use.
Do not use the toy on irritated or damaged skin.
Stop using the toy if you experience pain or feel unwell during use.
Under what conditions should I stop using the SATISFYER PRO 2 immediately?
Do not use the toy if it is:
1. Unusually hot.
2. Damaged or deformed.
3. Discoloured.
How should I clean the SATISFYER PRO 2?
Separate the toy from the charging cable/electrical supply during cleaning. The instructions indicate cleaning with water and soap.
Are there specific warnings regarding the magnetic fields of the SATISFYER PRO 2?
Yes. Magnetic fields can influence mechanical and electronic components such as pacemakers. Do not use the product directly over a pacemaker. Contact your doctor for more information.
Keep cards with magnetic stripes (such as credit cards) away from the product, as they may be damaged by the product’s magnet.
What are the risks associated with charging and batteries for the SATISFYER PRO 2?
Risk of injury due to fire/inflammation: Do not extinguish the product with water. Do not throw the product into fire.
Risk of injury due to defective batteries: Improper handling of batteries can cause uncontrolled exothermic reactions. In such cases, dispose of the entire product immediately in an appropriate manner.
Risk of damage due to overcharging: Disconnect the charging cable from the electrical supply after each charge.
Risk of injury due to electric shock: Liquid can cause damage to the electrical supply and endanger your health. Separate the toy from the charging cable/electrical supply during cleaning.
What should I do if the SATISFYER PRO 2 is exposed to changing ambient temperatures?
Changing ambient temperatures (e.g. after transport) can lead to condensation. In this case, do not use the toy until it has adapted to the new ambient temperature.
CLICK HERE TO DOWNLOAD SATISFYER PRO 2 (01) PDF DOCUMENT