PHOTIVE SPORT PH-TWS01 (01) PDF Document

The PHOTIVE SPORT PH-TWS01 package includes:

1. Photive PH TWS01 earbuds

2. Charging Case

3. USB charging cable

4. Eartips (4 sets: XS, S, M, L)

The PHOTIVE SPORT PH-TWS01 earbuds have the following functions:

1. MFB (multifunction button)

2. Indicator light and MIC

3. Charging contact point

4. Charging indicator

5. Micro USB charging port

To charge the charging base of your PHOTIVE SPORT PH-TWS01, use the supplied Micro USB cable and connect it to a standard USB charger. The Charging Base LED will turn red while charging and turn off once complete. For optimal AC charging, please use a 1.0A USB charger.

To charge the PHOTIVE SPORT PH-TWS01 earbuds, place the headset (L) and (R) into their corresponding positions in the bottom of the charging base and close the charging base tightly. The indicator light of the headset will turn red when charging and will turn off automatically after being fully charged. Once placed in the charging base, the earbuds will automatically turn off and start to charge.

If the charging base of your PHOTIVE SPORT PH-TWS01 has no power, the earbuds will not turn off automatically. Please ensure the charging base has power in order for them to function properly.

The PHOTIVE SPORT PH-TWS01 earbuds are paired to each other automatically from the factory. In the event they need to be reconnected: In OFF mode, press the MFB for 2 seconds to power on and wait for 10 seconds. The two headsets will enter TWS pairing mode automatically and connect to each other.

To pair your PHOTIVE SPORT PH-TWS01 earbuds to your device:

1. Pick up the two headsets from the charging base to power on and wait for 10 seconds. The two headsets will automatically pair to each other. The right earbud (R) will flash red and blue, indicating the headset is in pairing mode ready to connect to your device.

2. Open your device’s Bluetooth setting and search for “Photive TWS01”.

3. Select “Photive TWS01”.

In the event you want to delete all pairing records and reset your PHOTIVE SPORT PH-TWS01 earbuds, follow these instructions: In OFF mode, press and hold MFB (R) and (L) for 10 seconds (OFF mode → ON mode (2 seconds) → Delete pairing records (10 seconds)), until you hear 3 beeps, and the red/blue light flashes twice at the same time.

To turn ON your PHOTIVE SPORT PH-TWS01 earbuds using Method 1, in OFF mode, press and hold the MFB for 2 seconds.

To turn OFF, in ON mode, press and hold the MFB for 5 seconds.

To turn ON your PHOTIVE SPORT PH-TWS01 earbuds using Method 2, pick up the headsets from the charging base to turn on automatically.

To turn OFF, put them back and close the charging base to turn off automatically.

To play music on your PHOTIVE SPORT PH-TWS01 earbuds, in standby mode, shortly press the MFB.

To pause music, in music playing mode, shortly press the MFB to PLAY music, then press the MFB again to PAUSE music.

To answer or end a call on your PHOTIVE SPORT PH-TWS01 earbuds (Headset R), in standby mode or call mode, you can answer or end the call by shortly pressing the MFB of the headset (R).

To reject a call on your PHOTIVE SPORT PH-TWS01 earbuds, press and hold the MFB of headset (R) for 2 seconds. The speaker will prompt “beep” twice and “call reject.”

To redial the last number on your PHOTIVE SPORT PH-TWS01 earbuds (Headset R), in standby mode or call mode, shortly press the MFB twice. The speaker will prompt “beep” twice and “redial.”

When you are answering a call with your PHOTIVE SPORT PH-TWS01 earbuds and there is another call coming (only supported with mobile phones capable of handling two phones):

1. Press and hold the MFB of headset (R) for 2 seconds to end the current call and answer another one.

2. Shortly press the MFB of headset (R) once to answer another call and hold on the current one.

3. After operation “2” is settled, shortly press the MFB of headset (R) to transfer one call to another.

Note: All the above operations require the phone to support Bluetooth hands-free profile V1.5 and to be running under call holding function (network services) from the telecom.

*The time mentioned above may vary due to user’s operation mode and device settings.

The PHOTIVE SPORT PH-TWS01 earbuds include 4 sets of eartips (Extra Small, Small, Medium, Large). Depending on the size and shape of your ear canal, use the one that fits you best for optimal sound and comfort. It’s common to wear a medium ear tip on one ear and a larger one in the other. Experiment to produce the best possible “seal” while achieving comfort. To replace the eartips, simply remove them and replace.

Place the headset into the concha.

Slightly rotate headset until it is firm.

Ensure the earpiece is secure and fits snug.

The PHOTIVE SPORT PH-TWS01 equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and the receiver.

3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for additional suggestions.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used in the installation of the product, they must be used in order to ensure compliance with FCC regulation.