ARMITRON PRO SPORT MD11239 (01) PDF Document

The ARMITRON PRO SPORT MD11239 watch includes the following features:

• Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the Week)

• Calendar Mode (Month, Date, and Day of the Week)

• 24 Hour Alarms

• Hourly Chime: One ‘Beep’ sound every full Hour

• Chronograph Mode: Hours, Minutes, Seconds, and 1/100 of a second with Lap Operation

• Countdown Timer

• Dual Time Zone

• 12/24 Hour (Military Time)

• Pacer

• Water Resistant as indicated on the watch

• INSTALITE – Electro Luminescent Display

1. The Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of the Week.

2. From Time Telling Mode, press ‘A’ once. Chronograph appears. Press ‘A’ five times to return to Time Telling Mode.

3. From Time Telling Mode, press ‘B’ twice. Countdown Timer Mode appears. Press ‘B’ four times to return to Time Telling Mode.

4. From Time Telling Mode, press ‘B’ three times. Alarm Mode appears. Press ‘A’ three times to return to Time Telling Mode.

5. From Time Telling Mode, press ‘B’ four times. Dual Time Zone Mode appears. Press ‘A’ twice to return to Time Telling Mode.

6. From Time Telling Mode, press ‘B’ five times. Pacer Mode appears. Press ‘B’ once to return to Time Telling Mode.

1. From Time Telling Mode, press and hold ‘A’. Seconds flash. Press ‘C’ to zero out the Seconds.

2. Press ‘B’. Hours flash. Press ‘C’ to advance the Hour. NOTE: Pressing and holding ‘C’ will advance digits rapidly. When 12 Hour Format is selected, ‘P’ indicates ‘p.m.’ times; there is no indicator for ‘a.m.’ times.

3. Press ‘B’. Minutes flash. Press ‘C’ to advance the Minute.

4. Press ‘B’. The Year flashes. Press ‘C’ to advance the Year.

5. Press ‘B’. The Month flashes. Press ‘C’ to advance the Month.

6. Press ‘B’. The Date flashes. Press ‘C’ to advance the Date.

7. Press ‘A’ to end set sequences and return to Time Telling Mode.

8. While setting, press ‘C’ to select either 12/24 Hour Time Format or 24 Hour (Military) Time. NOTE: ‘AM’ or ‘PM’ indicates 12 Hour Format.

1. From Time Telling Mode, press ‘B’ three times to enter the Alarm Mode.

2. Press ‘D’ to select the Alarm Number (Alarm 1 to 5).

3. Press ‘A’. Alarm Hours flash. Press ‘C’ to advance the Alarm Hour. NOTE: Pressing and holding ‘C’ will advance digits rapidly.

4. Press ‘B’. Alarm Minutes flash. Press ‘C’ to advance the Alarm Minute.

5. Press ‘A’ to end the set sequence.

6. Press ‘B’ three times to return to Time Telling Mode.

1. While in Alarm Mode, press ‘C’ to activate the Hourly Chime. The Hourly Chime Symbol appears to indicate the Hourly Chime will sound every hour on the hour.

2. Press ‘C’ again to deactivate the Hourly Chime.

3. Press ‘D’ to select the Alarm Number (Alarm 1 to 5).

4. Press ‘C’ again to activate the selected Alarm. The Alarm Symbol appears to indicate the selected Alarm will sound at the preset Alarm Time for about 60 seconds or until any button is pressed.

5. Press ‘C’ again to deactivate the selected Alarm.

6. Press ‘B’ three times to return to Time Telling Mode.

1. From Time Telling Mode, press ‘B’ five times to enter the Pacer Mode. The tempo number flashes.

2. Press ‘A’ to select the tempo. The tempo may be selected in the following sequence: 10, 20, 30, 40, 60, 80, 120, 160, 240, and 320.

3. Press ‘C’ to start the tempo.

4. Press ‘C’ again to stop the tempo.

5. Press ‘B’ to return to Time Telling Mode.

1. While in the Chronograph Mode, press ‘C’ to start timing.

2. Press ‘A’ to measure and display Split Times.

3. Press ‘C’ to stop timing at the end of the event and reveal the final Split Time.

4. Press ‘A’ again to reset to zero.

5. Press ‘B’ five times to return to Time Telling Mode.

1. From Time Telling Mode, press ‘B’ twice to enter the Timer Mode.

2. Press ‘A’. Hours flash. Press ‘C’ to advance the Hour.

3. Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.

4. Press ‘B’. Seconds flash. Press ‘C’ to adjust the Seconds.

5. When the Countdown Timer is set, press ‘A’ to end the set sequence and return to Timer Mode.

6. Press ‘C’ to start the Countdown Timer.

7. If desired, press ‘C’ again to stop the Countdown Timer. Press ‘C’ again to resume the Countdown Timer. NOTE: The Countdown timing will continue in any mode until ‘C’ is pressed. When the Timer has expired, the alarm will sound for about 10 seconds or until any button is pressed.

8. Press ‘C’ to stop the Timer.

9. Press ‘B’ twice to return to Time Telling Mode.

1. From Time Telling Mode, press ‘B’ four times to enter the Second Time Zone Mode.

2. Press ‘A’. Hours flash. Press ‘C’ to advance the Hour.

3. Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.

4. Press ‘A’ to end the set sequence.

5. Press ‘B’ to return to Time Telling Mode.

NOTE: The Dual Time (Second Time Zone) Clock may be used to keep track of a foreign time.

Press ‘D’ in any mode to illuminate the watch face. The backlight will remain lit for 2 to 3 seconds.

NOTE: Excessive use of light will shorten battery life.

Change the battery when the watch becomes slow, the readout darkens or does not appear, or the backlight fails. Before removing the old battery, be sure to denote its polarity so that the new battery is installed in exactly the same way. Replace with the same kind or equivalent only. This watch contains precise electronic components and should only be opened by a qualified watch technician. However, it is not necessary to return your watch to the manufacturer for battery replacement. It is recommended that you bring your timepiece to a local jeweler.

This is a WATER RESISTANT watch. Do not operate push buttons below the surface of the water. Should water or condensation appear in the watch, immediately have the watch checked. Water can corrode electronic parts inside the case.