LELO HUGO 2 REMOTE (01) PDF Document

Your LELO HUGO 2 REMOTE has been locked for transportation. To unlock, simply connect the charger.

Please follow these safety guidelines when using your LELO HUGO 2 REMOTE:

• Please consult your healthcare provider with any questions or concerns you may have regarding your condition.

• This device should be used by people aged 18 years and over.

• People with reduced physical, sensory or mental capabilities or lack of experience and knowledge should use the device only if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved.

• Minors should not clean and/or use the device unsupervised.

• Only use the product for the intended purpose. Sharing sex toys with other people may transmit sexual diseases. Do not share your sex toys with people other than your partner.

• Use protective measures with your partner if necessary.

• Do not use the product if you detect any cracks or signs of degradation on the covering material.

• To prevent stains, do not keep your product on the absorbent surfaces. If your product operates abnormally, turn off and consult the support section on our website.

• Do not use the product if one or more components are damaged.

Before first use, charge your LELO HUGO 2 REMOTE for 2 hours.

1. The battery cover on the remote should be loose when you first open your product. Lift it off and insert the batteries as shown in the user manual diagram.

2. Carefully place the cover on top of the battery compartment, ensuring that the ridges are aligned as shown in the diagram.

Once the cover is in place, insert the plastic key into the cover’s slot and make a 10-degree twist clockwise to lock it shut. To open, always use the key and make a 10-degree turn counterclockwise before replacing the batteries. Using other tools such as coins may damage the surface of the remote.

TIP: You may also use flattened palms on either side of the remote to push and twist the lid without using the key to lock and unlock. Always ensure the remote is fastened shut before using in water.

The LELO HUGO 2 REMOTE massager features:

• Ultra-smooth premium silicone body

• Power ON/OFF & Mode selection button

• Charging port

The remote control features:

• + / – Intensity control buttons

• Mode selection button

• Battery cover

• Before the first use, charge your LELO HUGO 2 REMOTE for 2 hours.

• Press the (()) button twice to turn it on.

• Press the (()) button to switch between the modes.

• Press and hold the (()) button to turn off.

• Unlock by pressing and holding the + and – buttons simultaneously for 3 seconds until the light turns on.

• Press the (()) button on the product to turn it on.

• To turn the remote on, press the + button; press it again to increase the vibration strength.

• Press the (()) button to switch between the eight vibration patterns.

• Press the – button to reduce vibration strength.

• Press and hold the – button to turn it off.

Yes, the LELO HUGO 2 REMOTE will initiate an automatic shutdown every 20 minutes to ensure the motor doesn’t overheat if the product is misused.

Turn on your remote by pressing the + button. Once a wireless connection is established, the lights on the massager and remote will be illuminated. Your massager will now be operating in SenseMotion™ mode 1. You can intensify vibrations by tilting the remote. When the remote is moved from a horizontal to a vertical position, vibration strength will increase from 10% to the maximum level (100%).

When in SenseMotion™ mode 1, press the (()) button on your remote to change to SenseMotion™ mode 2. In this mode, you can alter or intensify vibrations by moving the remote in any direction. Faster movements increase the intensity of vibrations up to 100%.

1. Insert the DC plug into the DC port at the base of your LELO HUGO 2 REMOTE.

2. Insert the mains plug into a USB Port.

Only use original chargers provided by LELO with your LELO HUGO 2 REMOTE.

The LED on the interface of your LELO HUGO 2 REMOTE indicates the battery status:

• **Charging:** The LED will pulse.

• **Fully Charged:** The LED will emit a steady glow.

• **Low Battery:** The LED will emit a blinking white light.

Cleaning:

The LELO HUGO 2 REMOTE is fully waterproof. Always clean it thoroughly before and after each use. You can wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel. Alternatively, you can rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry. Never use cleansers containing alcohol, petrol, or acetone. Using the product with hand creams or silicone-based lubricants may make the silicone permanently tacky.

Storage:

Avoid leaving your LELO HUGO 2 REMOTE in direct sunlight and NEVER expose it to extreme heat. Store it in a dust-free place and keep it away from products of other materials.

If the LED does not pulse when connected to the charger, check the following:

• The battery may be drained and will require several minutes to acknowledge that it is being charged.

• The charger is not properly connected. Check the wall and DC sockets.

If your LELO HUGO 2 REMOTE does not activate, check the following:

• The battery is empty. Recharge your LELO HUGO 2 REMOTE.

• The interface of your LELO HUGO 2 REMOTE is locked. Hold down the (()) button for 3 seconds.

MASSAGER

REMOTE CONTROL