FREE ENGLISH LELO SORAYA 2 (01) PDF USER GUIDE
FREE ENGLISH LELO SORAYA 2 (01) PDF USER MANUAL
FREE ENGLISH LELO SORAYA 2 (01) PDF OWNER GUIDE
FREE ENGLISH LELO SORAYA 2 (01) PDF OWNER MANUAL
FREE ENGLISH LELO SORAYA 2 (01) PDF REFERENCE GUIDE
FREE ENGLISH LELO SORAYA 2 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH LELO SORAYA 2 (01) PDF REFERENCE MANUAL
FREE ENGLISH LELO SORAYA 2 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH LELO SORAYA 2 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD LELO SORAYA 2 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
LELO SORAYA 2 (01) PDF SUMMARY:
How do I unlock my pleasure object?
Your pleasure object has been locked for transportation. To unlock, simply connect the charger or press and hold the + and – buttons simultaneously for 3 seconds.
What should I do before using SORAYA 2 for the first time?
Charge your SORAYA 2 for 2 hours before first use.
How do I unlock the device?
Unlock by pressing and holding the + and – buttons simultaneously for 3 seconds until the light turns on.
How do I turn on the device and increase the vibration strength?
Press the + button to turn on; press again to increase the vibration strength.
How do I switch between the 12 vibration patterns?
Press the ( ) button to switch between the 12 vibration patterns.
How do I reduce vibration strength?
Press the – button to reduce vibration strength.
How do I turn off the device?
Press and hold the ( ) button to turn off.
How do I hold the device for an even more pleasurable experience?
Apply a liberal amount of LELO Personal Moisturizer to your body and to SORAYA 2 before and during use.
How do I charge SORAYA 2?
- Insert the DC plug into the DC port at the base of your SORAYA 2.
- Insert the main plug into a wall socket. The LED on the interface of your SORAYA 2 will pulse to indicate it is charging. When it is fully charged (after 2 hours), the LED will emit a steady glow.
- When the battery is running low, the LED on your SORAYA 2 will emit a blinking white light.
- Only use original chargers provided by LELO with your SORAYA 2.
How do I clean the device?
- SORAYA 2 is fully waterproof, making cleaning simple. Rinse and spray with LELO Toy Cleaner, then rinse again and allow to dry.
- Always clean your SORAYA 2 thoroughly before and after each use. You can wash the silicone with warm water and antibacterial soap, rinse with clean hot water and pat dry with a lint-free cloth or towel. Never use cleansers containing alcohol, petrol or acetone.
How should I store the device?
- Avoid leaving your SORAYA 2 in direct sunlight and NEVER expose it to extreme heat.
- Store your SORAYA 2 in a dust-free place and keep it away from products of other materials.
What should I avoid when using the device?
Using SORAYA 2 with hand creams or silicone-based lubricants may make the silicone permanently tacky.
What should I do if the LED on SORAYA 2 does not pulse when the charger is connected?
- The battery is drained and will require several minutes to acknowledge that it is being charged.
- The charger is not properly connected. Check wall and DC sockets.
What should I do if SORAYA 2 does not activate when the center button is pressed?
- The battery is empty. Recharge your SORAYA 2.
- The interface of your SORAYA 2 is locked. Hold down + and – for 5 seconds.
Who should I contact if I experience any other problems with SORAYA 2 or if I have any questions regarding operation?
Contact customercare@lelo.com
How do I activate my 1-Year Limited Warranty?
To activate your 1-Year Limited Warranty, register the number provided on the LELO Authenticity Card at LELO.COM/SUPPORT.
How do I claim my warranty?
To claim your warranty, you must log in to your account at LELO.COM then select the option to make a warranty claim. Shipping costs are non-refundable.
CLICK HERE TO DOWNLOAD LELO SORAYA 2 (01) PDF MANUAL