LELO DOT (01) Image

Free English LELO DOT (01) PDF Document. Free English LELO DOT (01) PDF User Guide. Free English LELO DOT (01) PDF User Manual. Free English LELO DOT (01) PDF Owner Guide. Free English LELO DOT (01) PDF Owner Manual. Free English LELO DOT (01) PDF Reference Guide. Free English LELO DOT (01) PDF Instruction Guide. Free English LELO DOT (01) PDF Reference Manual. Free English LELO DOT (01) PDF Instruction Manual. Free English LELO DOT (01) PDF Operating Instructions.


CLICK HERE TO DOWNLOAD LELO DOT (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

How do I unlock my LELO DOT for the first time?

Your LELO DOT has been locked for transportation. To unlock, simply connect the charger. Alternatively, to lock or unlock the interface, hold down the + and – buttons simultaneously for 3 seconds.


What are the safety guidelines for using the LELO DOT?

This device should be used by people aged 18 years and over. Persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge should use the device only if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Minors should not use the device and should not clean and/or use the device unsupervised.


How do I get started with my LELO DOT?

Before the first use, charge your LELO DOT for 2 hours.

1. Press and hold the (()) button to turn it on.

2. Press the (()) button to switch between 8 modes.

3. Use the + and the – buttons to increase or decrease the intensity.

4. Press and hold the (()) button to turn off.


What are the main components of the LELO DOT?

The LELO DOT features:

• Elliptical clitoral stimulator

• Power ON/OFF & Mode Selection Button (())

• + / – Intensity Control Buttons

• Ultra-smooth premium silicone body

• Charging port


How should I use the LELO DOT?

The LELO DOT can be placed on various parts of the body, including the clitoris, outer labia, inner labia, and vagina.

Tip: For an even more pleasurable sensation, apply a liberal amount of LELO Personal Moisturizer to your body and to the LELO DOT before and during use.


Why did my LELO DOT shut down automatically during use?

The LELO DOT may initiate an automatic shutdown if pressed too hard against the body. This is a safety feature to assure the motor doesn’t overheat if the product is misused.


How do I charge my LELO DOT?

1. Insert the DC plug into the DC port at the base of your LELO DOT.

2. Insert the mains plug into a USB Port.

Only use original chargers provided by LELO with your LELO DOT.


What do the LED light indicators mean on my LELO DOT?

• **Pulsing LED:** The device is charging.

• **Steady glow LED:** The device is fully charged.

• **Blinking white light LED:** The battery is running low.


How should I clean and store my LELO DOT?

Always clean your LELO DOT thoroughly before and after each use.

The LELO DOT is fully waterproof. You can wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel. Alternatively, rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry.

For storage, avoid leaving your LELO DOT in direct sunlight and never expose it to extreme heat. Store it in a dust-free place and keep it away from products of other materials.


What products should I avoid using with my LELO DOT?

Using the LELO DOT with hand creams or silicone-based lubricants may make the silicone permanently tacky. For cleaning, never use cleansers containing alcohol, petrol, or acetone. Also, do not bend the LELO DOT too aggressively to avoid permanently damaging the soft and bendable tip.


What should I do if the LED on my LELO DOT does not pulse when the charger is connected?

If the LED on your LELO DOT does not pulse when charging, it could be due to one of the following reasons:

• The battery is drained and will require several minutes to acknowledge that it is being charged.

• The charger is not properly connected. Check the wall and DC sockets.


Why won’t my LELO DOT activate when the (()) button is pressed?

If your LELO DOT does not activate, check the following:

• The battery may be empty. Recharge your LELO DOT.

• The interface of your LELO DOT may be locked. Hold down + and – simultaneously for 3 seconds to unlock it.


What are the specifications of the LELO DOT?

MATERIALS: Body-safe silicone, ABS Plastic

FINISH: Smooth

SIZE: 60 x 46 x 165 mm / 2.4 x 1.8 x 6.5 in

WEIGHT: 98 g / 3.5 oz

BATTERY: Li-Ion 520 mAh 3.7 V

CHARGING: Up to 2 h at 5.0 V 500 mA

USER TIME: Up to 2 h

STANDBY: 90 days

FREQUENCY: 133 Hz

MAX. NOISE LEVEL: < 60 dB

INTERFACE: 3 buttons


How should I dispose of my LELO DOT?

The crossed-out dustbin symbol indicates that this pleasure object should not be treated as household waste, but rather be brought to the appropriate collection point for the recycling of electrical and electronic equipment.


CLICK HERE TO DOWNLOAD LELO DOT (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.