LELO LILY 3 (01) Image

Free English LELO LILY 3 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD LELO LILY 3 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How do I unlock my LELO LILY 3?

Your LELO LILY 3 has been locked for transportation. To unlock it, you can either connect the charger or hold down both buttons for 5 seconds.


What should I do before using my LELO LILY 3 for the first time?

Before the first use, charge your LELO LILY 3 for 2 hours.


How do I operate my LELO LILY 3?

To turn on: Press and hold the right button.

To switch modes: A quick double press allows you to switch between different modes.

To change power level: A semi-long press on the left or the right button changes the power level up and down.

To turn off: Press and hold the left button.


How do I charge my LELO LILY 3?

To charge your LELO LILY 3:

1. Insert the DC plug into the DC port at the base of your LELO LILY 3.

2. Insert the mains plug into a USB Port.

Please only use original chargers provided by LELO with your LELO LILY 3.


What do the LED light indicators on my LELO LILY 3 mean?

Pulsing light: The device is charging.

Steady glow: The device is fully charged.

Blinking white light: The battery is running low.


How should I clean my LELO LILY 3?

Always clean your LELO LILY 3 thoroughly before and after each use. The LELO LILY 3 is fully waterproof, making cleaning simple.

You can wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel. You can also rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry.

Never use cleansers containing alcohol, petrol, or acetone. Using the LELO LILY 3 with hand creams or silicone-based lubricants may make the silicone permanently tacky.


How should I store my LELO LILY 3?

Store your LELO LILY 3 in a dust-free place and keep it away from products of other materials. Avoid leaving your LELO LILY 3 in direct sunlight and NEVER expose it to extreme heat.


What should I do if the LED on my LELO LILY 3 does not pulse when the charger is connected?

If the LED does not pulse when the charger is connected, it could be for one of the following reasons:

• The battery is drained and will require several minutes to acknowledge that it is being charged.

• The charger is not properly connected. Check the wall and DC sockets.


What should I do if my LELO LILY 3 does not activate when the right button is pressed?

If your LELO LILY 3 does not activate, it could be for one of the following reasons:

• The battery is empty. Recharge your LELO LILY 3.

• The interface of your LELO LILY 3 is locked. Hold down the left and the right button for 5 seconds to unlock it.


What are the specifications of the LELO LILY 3?

Materials: ABS with silicone soft touch coating

Finish: Smooth

Size: 39 x 34 x 74 mm / 1.5 x 1.3 x 2.9 in

Weight: 45 g / 1.6 oz

Battery: Li-Ion 300 mAh 3.7 V

Charging: Up to 2 h

Rated Power Input: 5V 1.5 W

Rated Power Output: 3.7 V 0.7 W

User time: Up to 2 h

Standby: 90 days

Frequency: 93 Hz

Max. noise level: < 60 dB

Interface: 2 buttons


How should I dispose of my old LELO LILY 3?

The crossed-out dustbin symbol indicates that this pleasure object should not be treated as household waste, but rather be brought to the appropriate collection point for the recycling of electrical and electronic equipment.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

CLICK HERE TO DOWNLOAD LELO LILY 3 (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.