LELO F1S V2 (01) PDF Document

Important: Your pleasure object has been locked for transportation.

To unlock, simply connect the charger or simultaneously press the + and – button for 3 seconds.

Before the first use, charge your LELO F1S V2 for 2 hours.

Press the center button for 1 second to turn it on.

The LED lights will blink, showing the battery level.

The LED lights will go steady, showing the vibration level.

Press the + or – button to adjust the vibration intensity.

Press the center button for 3 seconds to turn it off.

Press and hold the + and – buttons simultaneously for 5 seconds to lock your LELO F1S V2 and avoid unintended activation.

Before the first use, charge your LELO F1S V2 for 2 hours.

Press the center button for 3 seconds to turn it on while activating the Bluetooth.

All the LED lights will blink simultaneously showing the Bluetooth pairing.

Open the F1S APP and once the confirmation message appears, press the center button of the product to confirm.

All the LED lights will go steady, showing the connection was successful.

If the connection fails, your product will automatically turn off after 30 seconds.

The battery and vibration level will be available in the app.

Only use original chargers provided by LELO with your LELO F1S V2.

Insert the DC plug into the DC port at the top of your LELO F1S V2.

The LED on the interface of your LELO F1S V2 will pulse to indicate it is charging. When it is fully charged (after c. 2 hours), the LED will emit a steady glow.

When the battery is running low, the LED on your LELO F1S V2 will emit a blinking white light.

SenSonic technology is an exclusive LELO breakthrough that offers 360 degrees of pleasure. Instead of standard vibrations, the LELO F1S V2 emits powerful sonic waves that permeate deep into your penis, making it feel as though it’s resonating from all directions all at once.

Cruise Control is a fully automatic function designed to detect any slowing motion of the dual motors and can boost the power up again via PWM (Pulse Wave Modulation). In doing so, Cruise Control ensures that you enjoy consistent power and intensity, no matter what.

Proper care and maintenance will help extend the lifetime of your LELO F1S V2 trainer.

The LELO F1S V2 is fully waterproof, making cleaning simple. Rinse and spray with LELO Toy Cleaner, then rinse again and allow to dry. A cotton swab can be used to clean the inside of the ‘mouth’.

Always clean your LELO F1S V2 thoroughly before and after each use. You can wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel.

Never use cleansers containing alcohol, petrol, or acetone.

Tip: For the most pleasurable sensation, apply a liberal amount of LELO Personal Moisturizer to your body and to LELO F1S V2 before and during use.

Using LELO F1S V2 with hand creams or silicone-based lubricants may make the silicone permanently tacky.

Avoid leaving your LELO F1S V2 trainer in direct sunlight and NEVER expose it to extreme heat.

Store your LELO F1S V2 in a dust-free place and keep it away from products of other materials.

IMPORTANT: Children shall not play with the appliance. For adult use only. Those who may be pregnant, have a pacemaker, diabetes, phlebitis, thrombosis or any other condition, should consult with a medical professional regarding the risk of blood clots before using any personal massage product.

The appliances must only be supplied at SELV.

Battery is drained and will require several minutes to acknowledge that it is being charged.

Charger is not properly connected. Check wall and DC sockets.

The battery is empty. Recharge your LELO F1S V2.

The interface of your LELO F1S V2 is locked. Hold down + and – for 5 seconds.