FREE ENGLISH LELO ENIGMA CRUISE (02) PDF USER GUIDE
FREE ENGLISH LELO ENIGMA CRUISE (02) PDF USER MANUAL
FREE ENGLISH LELO ENIGMA CRUISE (02) PDF OWNER GUIDE
FREE ENGLISH LELO ENIGMA CRUISE (02) PDF OWNER MANUAL
FREE ENGLISH LELO ENIGMA CRUISE (02) PDF REFERENCE GUIDE
FREE ENGLISH LELO ENIGMA CRUISE (02) PDF INSTRUCTION GUIDE
FREE ENGLISH LELO ENIGMA CRUISE (02) PDF REFERENCE MANUAL
FREE ENGLISH LELO ENIGMA CRUISE (02) PDF INSTRUCTION MANUAL
FREE ENGLISH LELO ENIGMA CRUISE (02) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD LELO ENIGMA CRUISE (02) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I unlock the ENIGMA™ Cruise?
- Connect the charger.
- Press and hold the + and – buttons together for 3 seconds until the light turns on. (Note: The troubleshooting section mentions holding for 5 seconds to unlock if it doesn’t activate, possibly indicating a different duration depending on the context or a typo in one section. Starting with the 3-second method as per initial setup instructions is recommended).
What are the general safety precautions for using the ENIGMA™ Cruise?
- Consult your healthcare provider with any questions or concerns regarding your condition before use.
- This product is for adults only. Keep it out of reach of children.
- Individuals with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, should only use the device under supervision or after receiving instruction on safe use and understanding the hazards.
- Only use the product for its intended purpose.
- Use protective measures with your partner if necessary.
- Do not use the product if you detect cracks or signs of degradation on the covering material.
- To prevent stains, do not keep the product on absorbent surfaces.
- If the product operates abnormally, turn it off and consult the support section on the LELO website.
- Do not use the product if one or more components are damaged.
- The appliance must only be supplied at SELV (Safety Extra Low Voltage).
Can I share the ENIGMA™ Cruise with others?
How long should I charge the ENIGMA™ Cruise before the first use?
How do I use the ENIGMA™ Cruise?
- Ensure the device is charged (charge for up to 2 hours before first use).
- Make sure the device is unlocked by pressing and holding the + and – buttons together for 3 seconds until the light turns on.
- Apply LELO Personal Moisturizer on the product and your body for enhanced pleasure.
- Press the + button to turn the device on.
- Press the + button again to increase the vibration strength.
- Press the (()) button to switch between the 8 available vibration patterns.
- Press the – button to reduce the vibration strength.
- Press and hold the (()) button to turn the device off.
How should I hold and place the ENIGMA™ Cruise during use?
What is Cruise Control?
Does the ENIGMA™ Cruise turn off automatically?
How can I enhance the sensation during use?
How do I charge the ENIGMA™ Cruise?
- Insert the DC plug into the DC port located at the base of your ENIGMA™ Cruise.
- Insert the mains (USB) plug into a USB Port.
- Only use original chargers provided by LELO with your ENIGMA™ Cruise.
What do the LED light indicators mean on the ENIGMA™ Cruise?
- Pulsing light: Indicates the device is charging.
- Steady glow: Indicates the device is fully charged.
- Blinking white light: Indicates the battery is running low.
How should I clean the ENIGMA™ Cruise?
- Always clean your ENIGMA™ Cruise thoroughly before and after each use.
- Wash the silicone part with warm water and antibacterial soap.
- Rinse with clean hot water.
- Pat dry with a lint-free cloth or towel.
- Alternatively, rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry.
Can I use hand creams or silicone-based lubricants with the ENIGMA™ Cruise?
How should I store the ENIGMA™ Cruise?
- Store your ENIGMA™ Cruise in a dust-free place.
- Keep it away from products made of other materials.
- Avoid leaving it in direct sunlight.
- NEVER expose it to extreme heat.
What should I do if the LED on my ENIGMA™ Cruise does not pulse when the charger is connected?
- The battery may be completely drained. It might require several minutes connected to the charger to acknowledge that it is being charged. Leave it connected for a while.
- Check if the charger is properly connected. Ensure both the wall (USB port) and DC sockets are securely connected.
What should I do if my ENIGMA™ Cruise does not activate when the (()) button is pressed?
- The battery may be empty. Recharge your ENIGMA™ Cruise.
- The interface might be locked. Press and hold the + and – buttons simultaneously for 5 seconds to unlock it.
Who should I contact if I experience other problems or have questions?
How do I activate the 1-year limited warranty?
How do I make a warranty claim?
- Ensure the claim is within the ONE (1) YEAR warranty period from the original purchase date.
- Keep your original purchase receipt as proof of the purchase date.
- Log in to your account at LELO.COM.
- Select the option to make a warranty claim.
How should I dispose of the ENIGMA™ Cruise?
CLICK HERE TO DOWNLOAD LELO ENIGMA CRUISE (02) PDF MANUAL