FREE ENGLISH LELO SILA CRUISE (02) PDF USER GUIDE
FREE ENGLISH LELO SILA CRUISE (02) PDF USER MANUAL
FREE ENGLISH LELO SILA CRUISE (02) PDF OWNER GUIDE
FREE ENGLISH LELO SILA CRUISE (02) PDF OWNER MANUAL
FREE ENGLISH LELO SILA CRUISE (02) PDF REFERENCE GUIDE
FREE ENGLISH LELO SILA CRUISE (02) PDF INSTRUCTION GUIDE
FREE ENGLISH LELO SILA CRUISE (02) PDF REFERENCE MANUAL
FREE ENGLISH LELO SILA CRUISE (02) PDF INSTRUCTION MANUAL
FREE ENGLISH LELO SILA CRUISE (02) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD LELO SILA CRUISE (02) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I unlock the SILA™ Cruise for first use?
What are the basic safety precautions for using the SILA™ Cruise?
- Consult your healthcare provider with any questions or concerns regarding your condition.
- This product is for adults only. Keep it out of reach of children.
- Individuals with reduced physical, sensory, or mental capabilities, or lack of experience, should only use the device under supervision or after receiving instruction on safe use and understanding the hazards.
- Use the product only for its intended purpose.
- Do not share sex toys with people other than your partner, as sharing may transmit sexual diseases. Use protective measures if necessary.
- Do not use the product if you see cracks or signs of degradation on the covering material.
- To prevent stains, avoid keeping the product on absorbent surfaces.
- If the product operates abnormally, turn it off and consult the support section on the LELO website.
- Do not use the product if any components are damaged.
How do I operate the SILA™ Cruise?
- Before first use, charge your SILA™ Cruise for up to 2 hours.
- Ensure the device is unlocked (press and hold + and – buttons together for 3 seconds until the light turns on).
- Apply LELO Personal Moisturizer to the product and your body for enhanced pleasure.
- Press the + button to turn the device on. Press the + button again to increase vibration strength.
- Press the (()) button to cycle through the 8 different vibration patterns.
- Press the – button to decrease the vibration strength.
- To turn the device off, press and hold the (()) button.
What is Cruise Control™?
Where can the SILA™ Cruise be used on the body?
Does the SILA™ Cruise turn off automatically?
How do I charge the SILA™ Cruise?
- Insert the DC plug of the charger into the DC port located at the base of your SILA™ Cruise.
- Connect the other end (mains plug) into a USB Port.
- The LED light on the interface will pulse to indicate that it is charging.
- When fully charged, the LED will emit a steady glow.
- If the battery is running low, the LED will emit a blinking white light.
How should I clean and store my SILA™ Cruise?
Cleaning:
- SILA™ Cruise is fully waterproof.
- Always clean thoroughly before and after each use.
- Method 1: Rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry.
- Method 2: Wash the silicone part with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel.
- Never use cleansers containing alcohol, petrol, or acetone.
- Avoid using hand creams or silicone-based lubricants with the device, as they may make the silicone permanently tacky.
Storage:
- Avoid leaving the device in direct sunlight.
- NEVER expose it to extreme heat.
- Store your SILA™ Cruise in a dust-free place.
- Keep it away from products made of other materials to prevent potential reactions.
What should I do if the LED on my SILA™ Cruise doesn’t pulse when the charger is connected?
- The battery might be completely drained. It may require several minutes connected to the charger to acknowledge the charge. Leave it connected for a while.
- Check if the charger is properly connected. Ensure both the DC plug into the device and the USB plug into the power source (wall socket or USB port) are securely connected.
What should I do if my SILA™ Cruise doesn’t turn on when the (()) button is pressed?
- The battery may be empty. Recharge your SILA™ Cruise using the provided charger.
- The interface might be locked. Press and hold the + and – buttons simultaneously for 5 seconds to unlock it.
What are the specifications of the SILA™ Cruise?
- Materials: Body-safe silicone, ABS plastic
- Body colors: Pink, Lilac, Aqua
- Interface: 3-button interface
- Switch off: Automatic after 20 minutes of inactivity
- Frequency: 60 Hz
- Battery: Li-Ion 520mAh 3.7V
- Charge time: Approximately 2 hours at 5.0V 500mA
- User time: Up to 2 hours per charge
- Standby: Up to 90 days
- Size: 80 x 75 x 35 mm / 31.5 x 25.5 x 13.8 in
- Weight: 105g / 0.23 lb
How do I register the warranty for my SILA™ Cruise?
What does the 1-Year LELO warranty cover?
How do I make a warranty claim?
How should I dispose of the SILA™ Cruise?
CLICK HERE TO DOWNLOAD LELO SILA CRUISE (02) PDF MANUAL