FREE ENGLISH LELO INA WAVE (02) PDF USER GUIDE

FREE ENGLISH LELO INA WAVE (02) PDF USER MANUAL

FREE ENGLISH LELO INA WAVE (02) PDF OWNER GUIDE

FREE ENGLISH LELO INA WAVE (02) PDF OWNER MANUAL

FREE ENGLISH LELO INA WAVE (02) PDF REFERENCE GUIDE

FREE ENGLISH LELO INA WAVE (02) PDF INSTRUCTION GUIDE

FREE ENGLISH LELO INA WAVE (02) PDF REFERENCE MANUAL

FREE ENGLISH LELO INA WAVE (02) PDF INSTRUCTION MANUAL

FREE ENGLISH LELO INA WAVE (02) PDF OPERATING INSTRUCTIONS


CLICK HERE TO DOWNLOAD LELO INA WAVE (02) PDF MANUAL

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How do I register the warranty for my LELO product?

To register your warranty, find your warranty number on the LELO Authenticity card provided. Then visit LELO.com and click on REGISTER in the top right side of the page. This allows you to confirm the authenticity of your purchase and protect your investment.

How do I get started with my INA Wave or MONA Wave?

  1. Before first use, charge the massager for 2 hours.
  2. Given the nature of intimate massagers, we recommend you always use a premium water-based lubricant for added comfort.
  3. Turn on the massager by pressing the button on the middle of the interface until the light turns on.
  4. Press the + and – buttons to increase or decrease the vibration intensity.
  5. Press the ∧ and ∨ arrows to explore the 10 modes available.
  6. Press the middle button to turn off. Your LELO will remember your last chosen mode for the next time you turn it on.

How do I lock or unlock my LELO product?

Press and hold the + and – buttons simultaneously for 3 seconds to unlock or lock your LELO product. The lock setting will prevent accidental activation of the device. Charging will automatically unlock your LELO product.

How do I charge my INA Wave or MONA Wave?

Before charging, make sure the DC socket is free from water or lubricant residue.
  • Gently insert the DC plug into the DC socket, deep enough to feel a subtle click.
  • Insert the main plug into a wall socket. The LED will pulse to indicate that your LELO is charging.
  • When fully charged (after approximately 2 hours) the LED will emit a steady glow.
  • The LED indicator glows red when the MONA Wave needs to be recharged.
  • Only use original chargers provided by LELO.

What is the INA Wave™?

INA Wave is a sleek and stylish dual-action vibrator that incorporates a seductive waving motion to reach a woman’s most erogenous zones, while ergonomically designed to suit the female body’s natural curves. It features controls for On/Off, Modes (∧/∨), and Vibration Intensity (+/-).

What is the MONA Wave™?

MONA Wave is an elegant mid-size vibrator whose bodice moves in a seductive waving motion and curves in all the right places. It is ergonomically designed and facilitates pleasure alongside elegance, with a smooth silicone touch and easy-to-use interface. It features controls for On/Off, Modes (∧/∨), and Vibration Intensity (+/-).

How do I operate my INA Wave™ or MONA Wave™?

On/Off, vibration intensity, waving motions and stimulation modes are all controlled with the interface. When any of the buttons are pressed, the LED will indicate that the interface is active.
  1. Push the On/Off button in the middle of the interface to activate or to turn off your LELO product.
  2. Press the + button to increase vibration intensity.
  3. At any time, press the – button to decrease vibration intensity.
  4. Push the ∧ button to cycle through the various stimulation modes. There are 10 in total.
  5. Push the ∨ button to return to a previous mode.
  6. Your LELO automatically remembers and saves the last stimulation setting you were last using, so that the next time you turn it on, it will start at your preferred mode.

How do I use the stimulation modes?

The INA Wave and MONA Wave have been programmed with 10 stimulation varieties that take full advantage of the waving movements and massaging vibrations. When you first turn the INA Wave or MONA Wave on, it will be in wave mode with a continuous vibration. Press the ∧ and ∨ buttons to move through the different modes and enjoy all the sensations.

What type of lubricant should I use?

LELO recommends that you use a water-based lubricant such as LELO’s Personal Moisturizer. Avoid using a silicone-based lubricant as this could make the silicone permanently tacky. If you wish to use a silicone-based lubricant, perform a patch test first. Never use massage oil or hand cream as lubricants with your LELO.

How should I clean my LELO product?

Always clean your LELO thoroughly before and after each use. The most effective way of doing this is to use a purpose-made cleaning solution such as LELO’s Antibacterial Cleaning Spray. Alternatively, you can wash the silicone with warm water and antibacterial soap, rinse with clean hot water and pat dry with a lint-free cloth or towel. Never use cleansers containing alcohol, petrol or acetone. Your LELO is 100% waterproof and submersible to a depth of 1 meter. The open charging socket is sealed from the internal workings of the massager, so can be cleaned and used underwater freely.

How should I store my LELO product?

Avoid leaving your LELO in direct sunlight and NEVER expose it to extreme heat. Store your LELO in a dust-free place and keep it away from toys of other materials.

Are there any important safety considerations?

For Adult Use Only. Those who may be pregnant, have a pacemaker, diabetes, phlebitis or thrombosis should consult with a medical professional regarding the risk of blood clots before using any personal massage product.

Why doesn’t my massager’s light pulse when the charger is connected?

  • The battery might be fully charged.
  • The battery might be drained and will require several minutes to acknowledge that it is being charged.
  • The charger might not be properly connected. Check the wall and DC sockets.

Why doesn’t my massager turn on when the middle button is pressed?

  • The interface might be locked. Press and hold the + and – buttons for 3 seconds to unlock.
  • The battery might be empty. Proceed to recharge your massager.

What should I do if I experience other problems?

If you experience any other problems with your LELO or if you have any questions regarding operation, please contact: CUSTOMERCARE@LELO.COM

What are the specifications of the INA Wave™ and MONA Wave™?

MATERIALS:Body-safe silicone/ABS
BATTERY:INA Wave: 850mAh 3.7V, MONA Wave: 500mAh 3.7V
CHARGING:2h at 5.0V
USER TIME:Up to 2 Hours
STANDBY TIME:Up to 90 days
ROTATION FREQUENCY:100 Hz
MAX. SOUND LEVEL:<50dB
INTERFACE:5-button interface

CLICK HERE TO DOWNLOAD LELO INA WAVE (02) PDF MANUAL


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.