KYOCERA ECOSYS M2635DN (01) Image

Free English KYOCERA ECOSYS M2635DN (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD KYOCERA ECOSYS M2635DN (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

What is the policy on removing cautionary labels from the KYOCERA ECOSYS M2635DN?

The KYOCERA ECOSYS M2635DN has cautionary labels. Do not remove these labels.


What safety precaution should be taken regarding areas marked “CAUTION: Hot surface” on the KYOCERA ECOSYS M2635DN?

These areas indicate a high temperature inside the KYOCERA ECOSYS M2635DN. Do not touch parts in this area, because there is a danger of getting burned.


Can I dispose of toner-containing parts from the KYOCERA ECOSYS M2635DN by incineration?

No. Do not attempt to incinerate parts from the KYOCERA ECOSYS M2635DN which contain toner. Dangerous sparks may cause burns.


What are the installation requirements for the KYOCERA ECOSYS M2635DN to ensure proper ventilation?

To keep the KYOCERA ECOSYS M2635DN cool and to facilitate changing of parts and maintenance, allow adequate access space around the machine. It is especially important to leave enough space around the side cover to allow air to be properly ventilated from the machine.


What are the minimum clearance spaces required for the installation of the KYOCERA ECOSYS M2635DN?

For proper installation and ventilation, please maintain the following minimum clearance spaces around the KYOCERA ECOSYS M2635DN:

Top: 400 mm (15.75″)

Front: 500 mm (19.69″)

Left side: 300 mm (11.81″)

Right side: 300 mm (11.81″)


What are the power source and operating environment specifications for the KYOCERA ECOSYS M2635DN?

The specifications for the KYOCERA ECOSYS M2635DN are as follows:


Specification Details
Power Source (120 V Specification Model) 120 V ~ 60 Hz 8.7 A
Power Source (230 V Specification Model) 220-240 V ~ 50/60 Hz 4.4 A
Operating Environment Temperature 10 to 32.5 °C (50 to 90.5 °F)
Operating Environment Relative Humidity 10 to 80%

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

CLICK HERE TO DOWNLOAD KYOCERA ECOSYS M2635DN (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.