Free English JURA S80 (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD JURA S80 (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is the proper use of the JURA S80 coffee machine?
The JURA S80 is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. Before using the machine, read the instructions for use thoroughly and completely.
What are the most important safety precautions for my JURA S80?
To ensure safe operation of your JURA S80, please follow these safety precautions:
To avoid electric shock:
• Never use a machine that is damaged or has a defective mains cable.
• In the event of damage, unplug the machine immediately from the mains supply.
• If the mains cable is damaged, it must be replaced with a special mains cable available from authorized service centers.
• Ensure the machine and mains cable are not located close to hot surfaces.
• Do not let the mains cable become trapped or rub against sharp edges.
• Never open or repair the machine yourself. Repairs may only be carried out by authorized service centers using original spare parts.
• To completely disconnect from the power supply, first switch off the JURA S80 using the On/Off button, then remove the mains plug from the socket.
To avoid scalds, burns, and other injuries:
• Place the machine out of the reach of children.
• Do not touch any hot parts. Use the handles provided.
• Be careful to ensure the milk system is correctly installed and clean.
To avoid damage to the machine:
• Never allow the mains cable to hang loosely, as it could be a tripping hazard.
• Protect the JURA S80 from environmental influences such as rain, frost, and direct sunlight.
• Do not immerse the machine, mains cable, or connections in water.
• Do not put the JURA S80 or any individual parts in the dishwasher.
• Before cleaning, switch the machine off. Always wipe it with a damp cloth, not a wet one.
• Only connect the machine to the mains voltage indicated on the rating plate.
• Use only original JURA maintenance products.
• Do not use coffee beans treated with additives or caramelised coffee beans.
• Only fill the water tank with fresh, cold water.
• Switch the machine off and unplug it if you will be absent for a long period.
How do I operate the touchscreen display on my JURA S80?
Your JURA S80 features a touchscreen display that can be operated in two ways:
Touch: Touch the display with your finger to start a coffee preparation or to select various settings in programming mode.
Slide: Move your finger across the display from left to right or from top to bottom (or vice versa). This allows you to select a specialty coffee or switch between program items.
What should I consider when setting up my JURA S80?
When setting up your JURA S80, please note the following:
• Place the JURA S80 on a horizontal surface that is not sensitive to water.
• Choose a spot for your JURA S80 which protects the machine against overheating. Ensure that the ventilation slots are not covered.
How do I fill the bean container on my JURA S80?
Coffee beans treated with additives (e.g., sugar), ground coffee, or freeze-dried coffee will damage the grinder. Only use roasted, untreated coffee beans.
1. Remove the aroma preservation cover.
2. Remove any dirt or foreign objects from inside the bean container.
3. Fill the bean container with coffee beans and close the aroma preservation cover.
How do I determine the water hardness for my JURA S80?
When you use the JURA S80 for the first time, you must set the water hardness. Use the Aquadur® test strips supplied with the machine:
1. Hold the test strip briefly (for 1 second) under flowing water.
2. Shake off the water.
3. Wait for about 1 minute.
4. You will then be able to read the degree of water hardness from the discolouration of the Aquadur® test strip and the description on the packaging.
How do I perform the first-time use setup for my JURA S80?
Precondition: The bean container has been filled.
1. Connect the mains cable to the machine and insert the mains plug into a power socket.
2. Press the On/Off button to switch the JURA S80 on.
3. The display will show ‘Sprachauswahl’. Move your finger up or down to select your language and touch ‘Save’.
4. The display shows ‘Water hardness’. Move your finger across the display to change the setting based on your water hardness test. Touch ‘Save’.
5. The display shows ‘Insert filter’. Place one receptacle under the coffee spout and another under the fine foam frother.
6. Remove the water tank and rinse it with cold water.
7. Fit the filter cartridge extension (supplied) on top of the CLARIS filter cartridge Smart.
8. Insert the filter cartridge with its extension into the water tank. Turn it clockwise until it audibly clicks into place.
9. Fill the water tank with fresh, cold water and reinsert the tank. The machine automatically detects the filter.
10. The display will show ‘Filter is being rinsed’. Water will flow out of the fine foam frother. The water may be slightly discoloured, which is not harmful.
11. The display shows ‘System is filling’, then ‘Empty drip tray’.
12. Empty the drip tray and put it back into the machine.
13. Place a receptacle under the coffee spout.
14. The display shows ‘Machine is heating’, then ‘Machine is rinsing’. The system is rinsed and the rinse stops automatically. The start screen is displayed, and your JURA S80 is ready for use.
How do I connect the milk system on my JURA S80?
Your JURA S80 creates fine milk foam with a perfect consistency. For best results, use milk with a temperature of 4–8 °C.
1. Remove the protective cover from the milk system.
2. Connect the milk pipe to the milk system.
3. Connect the other end of the milk pipe to a milk container or a milk cooler.
How do I connect a wireless accessory to my JURA S80?
You can connect your JURA S80 wirelessly to a compatible accessory (e.g., the Cool Control Wireless milk cooler). To do this, the receiver of the accessory or the JURA Smart Connect must be plugged into the service socket.
Precondition: The start screen is displayed.
1. Touch ‘P’.
2. The display shows ‘Machine settings’. Touch ‘Machine settings’.
3. Move your finger across the display until ‘Connect accessory’ is displayed in the centre.
4. Touch ‘Connect accessory’.
5. Now follow the instructions on the display to connect the accessory to the S80.
How do I prepare beverages like ristretto, espresso, and coffee on my JURA S80?
This is an example for preparing one coffee:
Precondition: The start screen is displayed.
1. Place a cup under the coffee spout.
2. Touch ‘Coffee’.
3. Preparation starts. The preset amount of water for coffee flows into the cup.
4. Preparation stops automatically. The start screen is displayed.
How do I prepare two coffees at once with my JURA S80?
This is an example for preparing two ristretti:
Precondition: The start screen is displayed.
1. Place two cups under the coffee spout.
2. Touch the product selector symbol (top right) to go to the product selector view.
3. Move your finger across the display until ‘2 x Ristretto’ is displayed in the centre.
4. Touch ‘2 x Ristretto’ to start preparation.
5. Preparation starts. The preset amount of water flows into the cups, and preparation stops automatically.
How do I prepare a latte macchiato or other specialty milk coffees on my JURA S80?
This is an example for preparing one latte macchiato:
Precondition: The start screen is displayed. Milk is connected to the fine foam frother.
1. Place a glass under the fine foam frother.
2. Set the selector switch for the professional fine foam frother to the Milk Foam position (vertical position).
3. Touch ‘Latte macchiato’.
4. ‘Latte macchiato’ appears and the preset amount of milk foam flows into the glass. There is a short interval while the hot milk separates from the milk foam.
5. Coffee preparation starts. The preset amount of water for espresso flows into the glass.
6. Preparation stops automatically.
How do I prepare warm milk and milk foam with my JURA S80?
This is an example for preparing hot milk:
Precondition: The start screen is displayed. Milk is connected to the milk system.
1. Place a cup under the fine foam frother.
2. Set the selector switch for the professional fine foam frother to the Milk position. If you wish to prepare milk foam, set it to the Milk Foam position (vertical).
3. Touch ‘Milk foam’.
4. The milk foam (or hot milk) is prepared. The preset amount flows into the cup.
5. Preparation stops automatically.
How do I use ground coffee with my JURA S80?
You can use the filler funnel for a second coffee variety, such as decaffeinated coffee. Never add more than two level measuring spoons of ground coffee. Use ground coffee that is not too fine.
Example: Prepare one espresso using ground coffee.
Precondition: The start screen is displayed.
1. Place an espresso cup under the coffee spout.
2. Open the cover of the filler funnel for ground coffee. The display will show ‘Please add ground coffee’.
3. Place one level measuring spoon of ground coffee into the filler funnel.
4. Close the cover of the filler funnel.
5. Touch ‘Espresso’.
6. Preparation starts and stops automatically.
How do I adjust the grinder on my JURA S80?
You can adjust the grinder to suit the degree of roast of your coffee. Only adjust the consistency of grind when the grinder is running; otherwise, the grinder adjustment switch could be damaged.
Example: Change the consistency of grind during the preparation of an espresso.
Precondition: The start screen is displayed.
1. Place a cup under the coffee spout.
2. Open the cover of the grinder adjustment switch.
3. Touch ‘Espresso’ to start preparation.
4. Turn the grinder adjustment switch to the desired position while the grinder is running.
5. The preset amount of water flows into the cup. Preparation stops automatically.
How do I prepare hot water with my JURA S80?
There is a danger of scalding from hot water splashes. Avoid direct contact with the skin. Use the hot-water nozzle supplied for a perfect water flow.
Example: Prepare hot water for green tea.
Precondition: The start screen is displayed.
1. Touch the product selector symbol (top right) to go to the product selector view.
2. Move your finger across the display until ‘Hot water for green tea’ is displayed in the centre.
3. Touch ‘Hot water for green tea’. The display shows ‘Insert hot-water nozzle’.
4. Remove the professional fine foam frother from the milk system.
5. Fit the hot-water nozzle on the milk system.
6. Touch ‘Next’.
7. The preset amount of water flows into the cup. Preparation stops automatically.
What are the daily maintenance tasks for my JURA S80?
To ensure optimum coffee quality, your JURA S80 requires daily maintenance:
1. Pull out the drip tray.
2. Empty the coffee grounds container and the drip tray. Rinse them both with warm water. Always empty the coffee grounds container when the machine is switched on to reset the counter.
3. Refit the coffee grounds container and the drip tray.
4. Rinse the water tank with clean water.
5. Clean the milk system if you have prepared milk.
6. Remove the milk pipe and rinse it thoroughly under running water.
7. Dismantle and rinse the professional fine foam frother.
8. Wipe the surface of the machine with a clean, soft, damp cloth.
How do I switch my JURA S80 off?
When the JURA S80 is switched off, the system is automatically rinsed if a specialty coffee has been prepared. If milk has been prepared, you will also be prompted to clean the milk system.
1. Place one receptacle under the coffee spout and another under the milk system.
2. Press the On/Off button.
3. If milk was prepared, you will be prompted to ‘Clean the milk system’. After 10 seconds, the switch-off process continues automatically. If you don’t start the cleaning, the milk system will be rinsed first.
4. ‘Machine is rinsing’ appears on the display. The operation stops automatically. Your JURA S80 is switched off.
What settings can I change in the programming mode of my JURA S80?
Touch ‘P’ to enter programming mode. You can make the following settings:
| Programme item | Sub-item | Explanation |
|---|---|---|
| ‘Machine settings’ | ‘Switch off after’ | Set the time after which the S8/S80 should switch off automatically. |
| ‘Save energy’ | Activate energy-saving mode. | |
| ‘Operating instructions’ | Activate/deactivate the operating instructions on how to use the professional fine foam frother and hot-water nozzle. | |
| ‘Factory setting’ | Reset the machine to its factory setting. | |
| ‘Units’ | Select the unit for the amount of water. | |
| ‘Display’ | Change the display brightness. | |
| ‘Water hardness’ | You can set the water hardness of the water used. | |
| ‘Choose language’ | Select your language. | |
| ‘Product counter’, ‘Maintenance counter’ | Keep track of all products prepared and view the number of maintenance programmes performed. | |
| ‘Demo mode’ | You cannot prepare any products in demo mode. | |
| ‘Connect accessory’, ‘Disconnect accessories’ | Connect the S8/S80 wirelessly to a JURA accessory or disconnect the connection again. | |
| ‘Maintenance status’ | ‘Clean the milk system’, ‘Clean’, ‘Change filter’, ‘Descale’, ‘Rinse’, ‘Lock display’, ‘Maintenance information’ | Here you can start the required maintenance programme or find out what maintenance actions are required. |
| ‘Product settings’ | Select your settings for speciality coffees and hot water. |
What are the adjustable product settings for my JURA S80?
The following settings can be set permanently for all specialty coffees, milk, and hot water:
| Product | Coffee strength | Amount | More settings |
|---|---|---|---|
| Ristretto, espresso | 10 levels | Coffee: 15 ml – 80 ml | Temperature (low, normal, high), product name, delete/replace/copy/double product |
| Coffee | 10 levels | Coffee: 25 ml – 240 ml | Temperature (low, normal, high), product name, delete/replace/copy/double product |
| Two ristretti, two espressi, two coffees | – | Coffee: the amount set for the single product is doubled. | Temperature (as for single product), product name, delete product |
| Cappuccino, flat white, caffè latte | 10 levels | Coffee: 25 ml – 240 ml Milk: 1 sec. – 120 sec. |
Temperature (low, normal, high), product name, delete/replace/copy product |
| Latte macchiato | 10 levels | Coffee: 25 ml – 240 ml Milk: 1 sec. – 120 sec. Interval: 0 sec. – 60 sec. |
Temperature (low, normal, high), product name, delete/replace/copy product |
| Espresso macchiato | 10 levels | Coffee: 15 ml – 80 ml Milk: 1 sec. – 120 sec. |
Temperature (low, normal, high), product name, delete/replace/copy product |
| Milk foam, milk | – | Milk: 1 sec. – 120 sec. | Product name, delete/replace/copy product |
| Hot water, hot water for green tea | – | Water: 25 ml – 450 ml | Temperature (low, normal, high), product name, delete/replace/copy product |
How do I restore my JURA S80 to factory settings?
Precondition: The start screen is displayed.
1. Touch ‘P’.
2. Touch ‘Machine settings’.
3. Move your finger across the display until ‘Factory setting’ is displayed in the centre.
4. Touch ‘Factory setting’.
5. The display will ask ‘Reset the machine to the factory settings?’.
6. Touch ‘Yes’.
7. ‘Saved’ appears briefly on the display. Your JURA S80 is switched off.
How do I manually rinse my JURA S80?
You can initiate the rinse operation manually at any time.
Precondition: The start screen is displayed.
1. Place one receptacle under the coffee spout and another under the fine foam frother.
2. Touch ‘P’.
3. Move your finger across the display until ‘Maintenance status’ is displayed in the centre.
4. Touch ‘Maintenance status’.
5. Move your finger across the display until ‘Rinse’ is displayed in the centre.
6. Touch ‘Rinse’ to start the rinse operation.
7. ‘Machine is rinsing’ and ‘Milk system is being rinsed’ will appear. The rinse stops automatically.
How do I clean the milk system of my JURA S80?
To ensure the milk system always works properly, you must clean it daily when you have been preparing milk. Use only original JURA maintenance products and the supplied container.
Precondition: The start screen displays ‘Clean the milk system’.
1. Touch ‘Clean the milk system’.
2. Touch ‘Clean the milk system’ again.
3. Touch ‘Start’ twice.
4. The display shows ‘Milk system cleaner’ / ‘Connect the milk tube’ / ‘Fresh water’.
5. Remove the milk pipe from the milk container or milk cooler.
6. Add milk system cleaner to the front part of the container up to the bottom mark.
7. Then fill with water up to the upper mark.
8. Place the container under the fine foam frother and connect the milk pipe to the container.
9. Touch ‘Next’. The display shows ‘Milk system is being cleaned’.
10. The operation is interrupted with a ‘Fresh water’ prompt.
11. Rinse the container thoroughly and fill the front part with fresh water up to the upper mark.
12. Place this under the fine foam frother and reconnect the milk pipe to the container.
13. Touch ‘Next’.
14. The operation stops automatically.
How do I dismantle and rinse the professional fine foam frother on my JURA S80?
To ensure the professional fine foam frother works properly and for hygiene, it must be dismantled and rinsed daily if you have been preparing milk.
1. Remove the milk pipe and rinse it thoroughly under running water.
2. Remove the professional fine foam frother.
3. Dismantle the fine foam frother into its individual parts.
4. Rinse all the parts under running water. If there are severely dried-on milk residues, first immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.
5. Re-assemble the professional fine foam frother, ensuring all parts are correctly and firmly connected.
6. Re-fit the fine foam frother on the milk system.
How do I insert or change the CLARIS Smart filter cartridge in my JURA S80?
Your JURA S80 no longer has to be descaled if you are using the CLARIS Smart filter cartridge. When the filter cartridge stops working, the machine will prompt you to change it.
1. When prompted, touch ‘Change the filter’ twice on the display.
2. Remove and empty the water tank.
3. Turn the old filter cartridge anticlockwise and remove it along with the extension.
4. Fit the filter cartridge extension on top of a new CLARIS Smart filter cartridge.
5. Insert the new filter cartridge with its extension into the water tank.
6. Turn the filter cartridge clockwise until it audibly clicks into place.
7. Fill the water tank with fresh, cold water and reinsert the tank.
8. ‘Saved’ appears on the display. The machine has automatically detected the new filter. ‘Filter is being rinsed’ is displayed, and water flows directly into the drip tray.
9. The display shows ‘Empty drip tray’. Empty the drip tray and coffee grounds container and put them back into the machine. The start screen is displayed.
How do I clean my JURA S80 when prompted?
After 180 preparations or 80 switch-on rinses, the JURA S80 will prompt you to clean it. The cleaning programme lasts approximately 20 minutes. Do not interrupt the programme.
Precondition: The start screen displays ‘Clean machine’.
1. Touch ‘Clean machine’, then ‘Clean’, then ‘Start’ twice.
2. The display shows ‘Empty coffee grounds container’. Empty the drip tray and coffee grounds container and put them back into the machine.
3. Place one receptacle under the coffee spout and another under the fine foam frother.
4. Touch ‘Next’. ‘Machine is being cleaned’ appears and water flows out.
5. The operation is interrupted, and the display shows ‘Add cleaning tablet’.
6. Open the cover of the filler funnel for ground coffee.
7. Insert a JURA cleaning tablet into the filler funnel and close the cover.
8. Touch ‘Next’. ‘Machine is being cleaned’ is displayed, and water flows repeatedly. The operation stops automatically.
9. The display shows ‘Empty coffee grounds container’. Empty the drip tray and coffee grounds container and put them back into the machine.
10. Cleaning is now complete.
How do I descale my JURA S80 when prompted?
The descaling programme lasts approximately 45 minutes. Do not interrupt the programme. Use only original JURA maintenance products.
Precondition: The start screen displays ‘Decalcify machine’.
1. Touch ‘Decalcify machine’, then ‘Descale’, then ‘Start’ twice.
2. ‘Empty drip tray’ appears. Empty the drip tray and coffee grounds container and put them back.
3. ‘Pour descaling agent into water tank’ appears. Remove and empty the water tank.
4. Completely dissolve 3 JURA descaling tablets in a receptacle holding 500 ml of water.
5. Pour the solution into the empty water tank and insert it into the machine.
6. Place one receptacle under the coffee spout and another under the fine foam frother.
7. Touch ‘Next’. ‘Machine is being descaled’ appears and water flows out repeatedly.
8. The operation is interrupted with ‘Empty drip tray’. Empty the drip tray and container and put them back.
9. ‘Fill water tank’ appears. Remove the water tank, rinse it thoroughly, fill with fresh, cold water, and reinsert it.
10. Place the receptacles back under the spouts and touch ‘Next’. The descaling operation continues.
11. The operation is interrupted with ‘Empty drip tray’. Empty the drip tray and container and put them back.
12. Descaling is now complete.
What do the display messages on my JURA S80 mean?
| Message | Cause/Result | Action |
|---|---|---|
| ‘Fill water tank’ | The water tank is empty. You cannot prepare any products. | Fill the water tank. |
| ‘Empty coffee grounds container’ | The coffee grounds container is full. You cannot prepare any products. | Empty the coffee grounds container and the drip tray. |
| ‘Drip tray not fitted’ | The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any products. | Fit the drip tray. |
| ‘Fill bean container’ | The bean container is empty. You cannot prepare any speciality coffees, but you can prepare hot water and milk. | Fill the bean container. |
| ‘Change the filter’ | The filter cartridge no longer works. | Replace the CLARIS Smart filter cartridge. |
| ‘Clean machine’ | The S80 is prompting you to clean it. | Perform cleaning. |
| ‘Decalcify machine’ | The S80 is prompting you to descale it. | Perform descaling. |
| ‘Machine too hot for maintenance’ | The system is too hot to start a maintenance programme. | Wait for several minutes until the system has cooled or prepare a speciality coffee or hot water. |
How can I troubleshoot common problems with my JURA S80?
| Problem | Cause/Result | Action |
|---|---|---|
| Insufficient foam is produced when the milk is frothed or milk sprays out of the fine foam frother. | The fine foam frother is dirty. | Clean the fine foam frother. Dismantle and rinse the professional fine foam frother. |
| Coffee only comes out in drips when it is being prepared. | The coffee is ground too finely and obstructs the system. | Set the grinder to a coarser setting. |
| The water hardness may not have been correctly set. | Perform descaling. | |
| ‘Fill water tank’ is displayed although the water tank is full. | The water tank float is trapped. | Descale the water tank. |
| Grinder is making a very loud noise. | There are foreign objects in the grinder. | Contact customer support. |
| ‘Error 2’ or ‘Error 5’ is displayed. | If the machine has been exposed to the cold for a long period of time, heating may be disabled for safety reasons. | Warm the machine at room temperature. |
| Other ‘Error’ messages are displayed. | – | Switch the S80 off with the On/Off button. Contact customer support. |
How do I prepare my JURA S80 for transport?
Keep the packaging for your JURA S80 to protect it during transport. To protect the machine from frost, the system must be emptied.
Precondition: The start screen is displayed.
1. Remove the milk pipe from the fine foam frother.
2. Place a receptacle under the fine foam frother.
3. Touch ‘Milk foam’.
4. Remove and empty the water tank.
5. Change the time to ’60 sec.’. Steam will continue to be discharged from the fine foam frother until the system is empty.
6. The display shows ‘Fill water tank’.
7. Press the On/Off button. Your JURA S80 is switched off.
What are the technical specifications of the JURA S80?
| Voltage | 220–240 V ~, 50 Hz |
| Power | 1450 W |
| Pump pressure | static, max. 15 bar |
| Holding capacity of water tank (without filter) | 1.9 l |
| Holding capacity of bean container | 280 g |
| Holding capacity of coffee grounds container | max. 16 portions |
| Cable length | approx. 1.1 m |
| Weight | approx. 10.0 kg |
| Dimensions (W × H × D) | 28.0 × 34.8 × 44.4 cm |
| Wireless connections | |
| CLARIS Smart filter cartridge (RFID technology) | Frequency band 13.56 MHz Max. transmission power < 1 mW |
| JURA Smart Connect (Bluetooth connection) | Frequency band 2.4 GHz Max. transmission power < 1 mW |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD JURA S80 (02) PDF DOCUMENT