IPEGA PG-XBX028S (01) PDF Document

The IPEGA PG-XBX028S is a multi-functional stand with the following features:

1. It is suitable for the XBX console to reduce heat and charge the original controller (with XBX original battery).

2. It is equipped with a top-mounted powerful cooling fan that can be controlled automatically or manually to adjust fan speed, providing excellent cooling performance with LED lighting effects.

3. It has one touch button for fan speed control and one touch button for light mode selection.

4. It includes one headset stand to place a headset.

5. It features two card slots to store storage expansion cards.

6. It provides game disc storage for a maximum of 6 game discs.

7. It has RGB colorful lighting effects with a total of 11 lighting modes.

8. It is compatible with the original XBX wraps for added convenience and protection.

The specifications for the IPEGA PG-XBX028S are as follows:

Input: DC 5V/2.3A

Output: DC 5V/2A

Single controller charging current: ≤500mA

Charging Hours: ~3.5 hours

1. Follow the steps shown in the diagram to assemble and connect the multifunctional charging dock and cooling fan to the console.

2. Turn the XBX console on. The controller charging indicators (A and B) and the cooling fan status indicator will light up green. The controller charger enters standby mode, and the RGB lights will work in the mode from the last shutdown.

3. Align the original XBX controller with the Type-C connector in either controller charging port A or B. The corresponding charging indicator light will turn red, indicating that the controller is charging. When the controller is fully charged, the corresponding charging indicator light will turn green.

After assembly and power-on, the fan on the IPEGA PG-XBX028S will enter the default automatic mode with the AUTO indicator light on. After 5 seconds, the temperature sensor will automatically detect the device’s temperature and intelligently adjust the fan speed.

You can manually control the fan using the “Fan Mode Switch” button to cycle through five different modes:

1. Automatic mode: Press the button five times.

2. Low-speed mode (Level 1): Press the button one time.

3. Medium-speed mode (Level 2): Press the button two times.

4. High-speed mode (Level 3): Press the button three times. This level provides the best dissipation effect but may be noisy.

5. Stop mode (Turn off): Press the button four times.

Pressing the light effect switch button on the IPEGA PG-XBX028S allows you to cycle through the 11 available lighting effects:

1. Rainbow Breath Flow

2. Rainbow Color Jogging

3. Rainbow Breath Gradient

4. Single Color Breath Gradient

5. Multi-color Overall Jumping

6. Blue

7. Aqua Blue

8. Green

9. Yellow

10. Red

11. Purple

To save the current light mode and turn off the lights, long-press the light mode switch button for 3 seconds. To turn the lights back on to the saved mode, press the light mode switch button again. The current light mode is automatically saved when the device is powered off and will be restored upon the next power-on.

The IPEGA PG-XBX028S is equipped with two USB ports. One port (USB port 1) supports 2.0 data functionality. The other port (USB port 2) supports low-current charging only.

The charging function of the IPEGA PG-XBX028S only supports the XBS/XBX original battery pack. Please do not attempt to charge any other controller or 3rd party battery pack.

Yes, please observe the following precautions when using the IPEGA PG-XBX028S:

1. When the device is powered on, there is voltage inside the Type-C connector used for controller charging. Please avoid bending the Type-C connector and prevent water, metal debris, or other foreign objects from coming into contact with it.

2. When a controller is fully charged or close to full charge and is placed on this product, the charging indicator light will not change and will continue to show a green light.

The product list for the IPEGA PG-XBX028S is as follows:

Multi-function Stand x 1

Fans Component x 1

Manual x 1

USB cable x 1

Headset Stand x 1