Free English IPEGA PG-SL003 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD IPEGA PG-SL003 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the features of the IPEGA PG-SL003 charger dock?
The IPEGA PG-SL003 is a charger for the N-Switch/N-Switch lite console, Pro controller, and Joy-con controllers. Its features include:
1. Four charging docks, allowing for any combination of items to be charged optionally.
2. Support for DC15V fast charge for the N-Switch/N-Switch lite console.
3. A TYPE-C female socket that supports power input from the original N-Switch adapter.
4. A delicate and compact design that is easy to operate and clearly indicates the current charging status.
How do I use the IPEGA PG-SL003 to charge my devices?
1. Connect the IPEGA PG-SL003 charger to the original N-Switch / N-Switch lite adapter to get power input.
2. After powering on, the charging indicator will always be green.
3. When charging a device, the corresponding indicator will turn red. After the device is fully charged, the light will turn green.
Please note: The product supports DC15V fast charge for the N-Switch/N-Switch lite console, but for this to work, you must make sure the power input is from the original N-Switch adapter.
What do the indicator lights on the IPEGA PG-SL003 mean?
The charging indicator lights on the IPEGA PG-SL003 show the following statuses:
Green Light: The dock is powered on and ready, or the device is fully charged.
Red Light: The device is currently charging.
What are the charging times and specifications for the IPEGA PG-SL003?
Input Voltage/Current: 5V 1.5A / 15V 2.6A
Charging time for Joy-con: Approximately 3 hours
Charging time for Pro controller: Approximately 4.5 hours
Charging time for N-switch / N-Switch lite console: Approximately 2 hours
What are the important safety notes for using the IPEGA PG-SL003?
1. Please do not store this product in wet or high-temperature areas.
2. Do not knap, beat, drub, pierce, or try to decompose this product, to avoid unnecessary damage.
3. Non-professional personnel should not disassemble the product.
What is included in the box with the IPEGA PG-SL003?
The accessories list includes:
1. Charging station x1
2. User Manual x1
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD IPEGA PG-SL003 (01) PDF DOCUMENT