Free English IPEGA PG-9181 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD IPEGA PG-9181 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the main features of the IPEGA PG-9181 charging station?
The IPEGA PG-9181 is a charging station for N-Switch, X1, and P4 game controllers. It features an ergonomic structure, simple appearance, and is easy to use. It also has an indication function for the X1 controller to show the current charging status.
How do I use the IPEGA PG-9181 to charge my controllers?
Connect the charger station to the adapter (DC5V, current greater than 1A) or the game console. After inserting the N-Switch, X1, and P4 controllers into the dedicated charging bracket, insert the bracket into the corresponding position on the charging stand to enter charging mode.
The charging indicators are as follows:
N-Switch controller: Has its own indicator when it is charged.
P4 controller: Has its own indicator when it is charged.
X1 controller: The charging adapter indicates the current charging status. It shows a red light when charging and a green light when fully charged.
What are the power adapter requirements for the IPEGA PG-9181?
If you use an external DC5V charger adapter with the IPEGA PG-9181, please make sure the adapter has overvoltage, overcurrent, and short circuit safety protection, and an output current greater than 1A.
Why does the IPEGA PG-9181 indicate my X1 controller is fully charged when the game console shows it is still charging?
When the X1 controller is fully charged on the charger stand, the charging indicator may be different from the game console. This is a normal occurrence. For example, the controller charging indicator on the stand may show it is full, while the game console still indicates it is charging.
Why is the charging indicator light for my X1 controller inaccurate on the IPEGA PG-9181 when the battery is low?
When the X1 controller is in a battery low-voltage protection state, the indicator light on the charging station may be inaccurate; this is normal. For example, when charging an X1 controller that is in a low-voltage protection state, the charging indicator may still show green for a short time.
What is an important safety precaution for the IPEGA PG-9181 charging station?
Do not connect the electrical contact points of the charging station to avoid damage to the power adapter.
What are the electrical parameters of the IPEGA PG-9181?
Size: L 113.3 * W80.6 * H 53.7 mm
Weight: 115±2g
Working voltage: DC 4.8~5.5V
Charging current: <800 mA
What is included in the box with the IPEGA PG-9181?
Charging station x1
X1 Controller Charger adapter x1
N-Switch Controller Charger adapter x1
P4 Controller Charger adapter x1
User Manual x1
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD IPEGA PG-9181 (01) PDF DOCUMENT