INVOLVE AUDIO AMP MASTER AMP-6CH-1 (01) PDF Document

To ensure safe operation of your INVOLVE AUDIO AMP MASTER AMP-6CH-1, please adhere to the following warnings:

WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.

WARNING: The apparatus shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard.

WARNING: No naked flame sources, such as lighted candles, should be placed on any part of the system.

The caution marks on your Surround Master V3 enclosure have the following meanings:

The exclamation point within an equilateral triangle: This symbol, as marked on the system, is intended to alert you to the presence of important operating and maintenance instructions in the owner’s guide.

The lightning flash with arrowhead symbol within an equilateral triangle: This symbol alerts you to the presence of uninsulated, dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.

No, please note that there are no user-serviceable components contained within the INVOLVE AUDIO AMP MASTER AMP-6CH-1.

The front panel of the INVOLVE AUDIO AMP MASTER AMP-6CH-1 has the following controls:

ON/OFF: Press the button to turn the unit ON or OFF. An indicator light will illuminate when the unit is ON.

SOFT CLIP: Press the button to toggle between “Clipping” and “No Clipping”. An indicator light will illuminate when the Clipping function is active.

WOOFER EQ: Press the button to toggle the Involve Woofer EQ between “Active” and “Inactive”. An indicator light will illuminate when the Woofer EQ is Active.

To connect the power supply to your INVOLVE AUDIO AMP MASTER AMP-6CH-1, follow these steps:

1. Connect the power cord to the Power IN port on the power adapter.

2. Plug the power cord into a power outlet.

3. Insert the barrel plug from the power adapter into the 30V DC input socket on the back of the amplifier.

The amplifier uses phoenix-style plugs for speaker connections. To connect your speaker wires, follow these steps:

1. Push the stripped ends of your speaker wires into the plug. Ensure you match the polarity (+ and -) with your speaker terminals.

2. Use a small screwdriver to tighten the screws on the plug to securely grip the wires.

3. Push the plug into the corresponding speaker socket (1-6) on the back of the amplifier.

To connect a pre-amplifier or another line-level source, use RCA cables to connect the outputs of your pre-amp to the corresponding RCA INPUT jacks on the back of the INVOLVE AUDIO AMP MASTER AMP-6CH-1.

The WOOFER EQ switch on the back panel allows you to apply the Involve Woofer EQ to specific channels. There are three positions:

Left Position: No EQ active.

Middle Position (|5,6|): EQ is active on Channels 5 and 6.

Right Position (|6|): EQ is active on Channel 6 only.

Slide the switch to the desired position to configure the EQ output.

The INVOLVE AUDIO AMP MASTER AMP-6CH-1 is a 6 Channel Class D amplifier with a total power of 120W RMS, providing 20W per channel. Channels 5 & 6 feature a switchable Involve Woofer EQ.