FREE ENGLISH MASTER LOCK 4401 (01) PDF USER GUIDE
FREE ENGLISH MASTER LOCK 4401 (01) PDF USER MANUAL
FREE ENGLISH MASTER LOCK 4401 (01) PDF OWNER GUIDE
FREE ENGLISH MASTER LOCK 4401 (01) PDF OWNER MANUAL
FREE ENGLISH MASTER LOCK 4401 (01) PDF REFERENCE GUIDE
FREE ENGLISH MASTER LOCK 4401 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH MASTER LOCK 4401 (01) PDF REFERENCE MANUAL
FREE ENGLISH MASTER LOCK 4401 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH MASTER LOCK 4401 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD MASTER LOCK 4401 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I unlock the lock with a mobile device using the Quick Start instructions?
1. Remove lock & instructions from package.
2. On mobile device, visit app store & download free Master Lock Vault eLocks app.
3. Follow prompts to log into, or create, a Master Lock Vault account.
4. In Master Lock Vault eLocks app, touch Add a Lock (+).
5. Enter ACTIVATION CODE shown above to register lock & follow instructions to connect mobile device to lock.
6. Touch any button on lock keypad to wake up lock & prompt it to communicate with your mobile device.
Your lock is now in Touch Unlock mode. You can recalibrate the phone-to-lock communication range in the app settings.
How do I unlock the lock with the lock keypad using the Quick Start instructions?
1. Remove lock & instructions from package.
2. Enter PRIMARY CODE above by pressing the corresponding directions on lock keypad.
Do not pull on the shackle when entering code.
3. When lock lights green, open within 5 seconds or it will relock.
What do the LED keypad indicators mean?
| BLUE | GREEN | YELLOW | RED |
|---|---|---|---|
| Locked, Communicating, or Keypad Entry | Open or Unlocked & Waiting To Be Opened | Low Battery | Invalid Keypad Entry |
How do I replace the battery in the Model 4400 lock?
1. Lock will light yellow to indicate a low battery.
2. Unlock & open the lock.
3. Pull out battery drawer & remove old battery.
4. Install a new CR2450 battery with positive (+) side facing the back of the lock.
5. Close battery drawer.
How do I unlock the Model 4400 lock with an external battery if the internal battery dies?
1. If battery dies in locked position, pull battery drawer out part way to expose jump contact point.
Do not force the drawer open any further.
2. Hold a new CR2450 battery in the slot with positive (+) side of battery facing the front of the lock.
3. While holding the battery in place, with authorized mobile device within range of lock, press any keypad button on the lock (if in Touch Unlock mode). If lock does not unlock, enter Primary Code on lock keypad.
4. When unlocked, pull out battery drawer & install a new CR2450 battery.
How do I replace the battery in the Model 4401 lock?
1. Lock will light yellow to indicate a low battery.
2. Unlock & open the lock.
3. Remove bottom cover.
4. Use a coin to turn battery door slot 90 degrees counter clockwise (A). Open battery door & remove old battery.
5. Install a new CR2 battery with positive (+) side facing right.
6. Close battery door, turn slot back 90 degrees clockwise & replace bottom cover.
How do I unlock the Model 4401 lock with an external battery if the internal battery dies?
1. If the battery dies in locked position, remove bottom cover.
2. Hold a 9V battery to jump contacts on bottom of lock.
3. While holding the battery in place, with authorized mobile device within range of lock, press any keypad button on the lock (if in Touch Unlock mode). If lock does not unlock, enter Primary Code on lock keypad.
4. When unlocked, open battery door & install a new CR2 battery.
CLICK HERE TO DOWNLOAD MASTER LOCK 4401 (01) PDF MANUAL