Free English HARMAN JBL STAGE1 42F (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD HARMAN JBL STAGE1 42F (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the specifications of the HARMAN JBL STAGE1 42F speakers?
The specifications for the HARMAN JBL STAGE1 42F speakers are as follows:
Speaker: 4″ (100mm) Coaxial Car Speaker without Grille
Power Handling: *40W RMS, 320W peak
Sensitivity (@2.83V): 88dB
Frequency Response: 85Hz-20kHz
Nominal Impedance: 4ohm
*40W RMS: Long-term maximum power refer to IEC 60268
20W RMS: 100H continuous testing at rated power refers to IEC 60268
What are the dimensions of the HARMAN JBL STAGE1 42F speaker?
The dimensions for the HARMAN JBL STAGE1 42F speaker are:
Diameter: 4″ (101.5mm)
Mounting Diameter: 3-19/32″ (91.0mm)
Mounting Depth: 1-5/8″ (40.9mm)
Total Depth: 2-3/32″ (52.9mm)
What components are included in the box with the HARMAN JBL STAGE1 42F speakers?
The box for the HARMAN JBL STAGE1 42F contains the following items:
2x Speakers
8x Screws
8x Speed clips
What are the Thiele-Small Parameters for the HARMAN JBL STAGE1 42F speaker?
The Thiele-Small Parameters for the HARMAN JBL STAGE1 42F are as follows:
BL (Tm): 2.521
DCR (Ohms): 3.24
Mms (g): 4.03
Sd (cm²): 50.27
Cms (um/N): 474
Vas (L): 1.6958
Fs (Hz): 115.1
Qes: 1.485
Qms: 7.957
Qts: 1.251
Crossover Point: 6600Hz
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD HARMAN JBL STAGE1 42F (01) PDF DOCUMENT