3.0 out of 5 stars (based on 1 review)
FORD M-6339-A351 (01) PDF MANUAL
Click here to download FORD M-6339-A351 (01) PDF MANUAL
PDF Summary:
FORD M-6339-A351 (01) PDF MANUAL
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD RACING PERFORMANCE PARTS.
Please visit http://www.fordracingparts.com for the most current instru*tion information
! ! ! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION.
AT ANY TIME YOU DO NOT UNDERSTAND THE INSTRUCTIONS, PLEASE CALL THE FORD RACING
TECHLINE AT 1-800-367-3788 ! ! !
INSTALLATION INSTRUCTIONS:
• Kit reduces 351W main bearing bores to 351C diameter in production 351W or Ford Racing
M-6010-A351/B351/A58 cylinder blocks.
• Use with M-6333-A351 main bearings.
• The bearings do not have locating tangs and the spacers do not have tang slots. The bearings are located
longitudinally by eye and held in *l**e by crush from the bearing cap/main saddle fit.
• The spacer kit thrust flange width acc*mmodates the Ford Racing M-6303-E351 low cost cast crankshaft.
For Ford Racing steel cranks, use Federal Mogul spacer kit # 147MSEMI which has .015" less thrust flange
width.
• The spacers must be installed, align bored and plateau honed (Ra 16mu In) to 2.9417" / 2.9425".
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
Techline 1-800-367-3788
Page 1 of 1
IS-1850-0321
M-6339-A351
Main Bearing Spacer Kit
INSTALLATION INSTRUCTIONS
FREE ENGLISH PDF
OPERATING INSTRUCTIONS
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL
FORD M-6339-A351 (01) PDF MANUAL
FORD M-6339-A351 (01) PDF MANUAL