Free English FANVIL I53W (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD FANVIL I53W (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the physical specifications for the FANVIL I53W?
The FANVIL I53W features a 7 inch touch screen, includes PoE support, Wi-Fi (2.4G) connectivity, and an RS-485 interface. Its dimensions are 176 by 140 by 26.5mm.
What is the description of the front panel keys on the FANVIL I53W?
| No. | Description |
|---|---|
| 1 | Management Center Key |
| 2 | Monitor key |
| 3 | Unlock Key |
| 4 | Return / Hang up key |
| 5 | Answer key |
| 6 | Microphone |
What are the rear panel interface descriptions for the FANVIL I53W?
| No. | Description |
|---|---|
| 1 | DC Power interface: 12V/1A input. |
| 2 | Ethernet interface: standard RJ45 interface, 10/100M adaptive, it is recommended to use CAT5 or CAT5E network cable. |
| 3 | Industrial power interface. |
| 4 | 1 set of RS485 interface: can be connected to card reader, sensor etc. |
| 5 | 8 sets of alarm input interfaces: input devices for connecting switches, infrared sensor, door sensor, vibration sensors etc. |
| 6 | Speaker |
How do I perform a wall mounted installation for the FANVIL I53W?
For installations without an 86 embedded box in the wall, follow these steps:
Step A. According to the position of the cable in the wall, dig out a square hole (height by width by depth equals 58.5 by 60 by 50mm) that can accommodate all cables.
Step B. Align the square hole of the wall bracket with the hole digged out before, then mark the two fixation holes through the bracket on the wall.
Step C. Take down the bracket, use an electric drill to make the two fixation holes on the wall, then insert the two screw fixing seats provided.
Step D. Fix the wall bracket on the wall with two TA4 by 30 screws.
How do I perform a wall mounted installation for the FANVIL I53W with an embedded box?
When using an 86 embedded box or Dual gang box in the wall, follow these steps:
Step A. Make sure all cables are in the embedded box.
Step B. Fix the wall bracket on the 86 embedded box with two PM4 by 16mm screws.
Step C. If using a Dual Gang Box, fix the bracket to the box with four PM3.3 by 20.5mm screws.
How do I connect peripherals and complete the FANVIL I53W installation?
Step 1. If you need to connect other input and output devices, please connect to the host through the cable.
Step 2. Power on the device. If it is working properly, align the slot on the rear side of the panel with the pin on the wall bracket and slide the host down to complete the installation.
How do I perform a desktop installation for the FANVIL I53W?
Align the slot on the rear side of the panel with the pin on the desktop bracket and slide the bracket up to complete the installation.
How do I find the IP address of the FANVIL I53W?
The default WAN mode is DHCP. You can find the IP address using the following method: After booting the FANVIL I53W, access the Menu, then select Status.
How do I log in to the web setting page of the FANVIL I53W?
Input the IP address of the FANVIL I53W into the address bar of a PC web browser. The default user name and password are both admin.
How do I add a SIP account to the FANVIL I53W?
Step 1. Log in to the web setting page.
Step 2. Set SIP server address, port, user name, password and SIP user with assigned SIP account parameters.
Step 3. Select Activate, and then click Apply to save the setting.
How do I configure unlock settings on the FANVIL I53W?
Navigate to Function Key settings. Set the unlock key type to DTMF, and the value should be the password to open the correct access control device.
How do I answer or hang up calls on the FANVIL I53W?
When the door phone calls the FANVIL I53W, click the Answer key to answer the call, and click the Return or Hang up key to hang up the call.
How do I unlock the door using the FANVIL I53W?
During the call between the FANVIL I53W and the door phone, click the Unlock Key to unlock the door.
How do I turn on or off monitoring with the FANVIL I53W?
Click the Monitor key on the FANVIL I53W to check the monitoring screen, and click the Return or Hang up key to exit. This feature only supports communication with video door phones.
How do I call the management center using the FANVIL I53W?
Click the Management Center Key on the FANVIL I53W to call the management center, and click the Return or Hang up key to cancel the call.
CLICK HERE TO DOWNLOAD FANVIL I53W (01) PDF DOCUMENT