Free English FANVIL I52W (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD FANVIL I52W (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the physical specifications for the FANVIL I52W?
The FANVIL I52W features a 7 inch LCD display. It supports PoE, Wi-Fi (2.4G), and RS-485. The physical dimensions are 176x140x26mm.
What are the components included in the package for the FANVIL I52W?
The package contains the following items: 1 Indoor Station (FANVIL I52W), 1 Quick Installation Guide, 1 Wall-mount Bracket, 1 10 pin Cable, 1 4 pin Cable, 1 2 pin Cable, 2 TA4*30mm Screws, 2 PM4*16mm Screws, and 2 Screw fixing seats.
What are the front panel buttons on the FANVIL I52W and their functions?
| No. | Description |
|---|---|
| 1 | Management Center Key |
| 2 | Monitor key |
| 3 | Unlock Key |
| 4 | Return / Hang up key |
| 5 | Answer key |
| 6 | Microphone |
What interfaces are located on the rear panel of the FANVIL I52W?
| No. | Description |
|---|---|
| 1 | DC Power interface: 12V/1A input. |
| 2 | Ethernet interface: standard RJ45 interface, 10/100M adaptive. |
| 3 | Industrial power interface. |
| 4 | 1 set of RS485 interface: can be connected to card reader, sensor etc. |
| 5 | 8 sets of alarm input interfaces: input devices for connecting switches, infrared sensor, door sensor, vibration sensors etc. |
| 6 | Speaker |
How do I perform a wall-mounted installation for the FANVIL I52W without an embedded box?
Step 1. According to the position of the cable in the wall, dig out a square hole (height*width*depth=58.5*60*50mm) that can accommodate all cables.
Step 2. Align the square hole of the wall bracket with the hole digged out before, then mark the two fixation holes through the bracket on the wall.
Step 3. Take down the bracket, use an electric drill to make the two fixation holes on the wall, then insert the two screw fixing seats provided.
Step 4. Fix the wall bracket on the wall with two TA4*30 screws.
How do I install the FANVIL I52W using an 86 embedded box or Dual gang box?
Step 1. Make sure all cables are in the embedded box.
Step 2. Fix the wall bracket on the 86 embedded box with two PM4*16mm screws.
Step 3. For a Dual Gang Box, fix the bracket with 4 PM3.3*20.5mm screws.
How do I mount the FANVIL I52W onto the wall bracket?
After connecting the peripherals, power on the device. If it is working properly, align the slot on the rear side of the panel with the pin on the wall bracket and slide the host down to complete the installation.
How do I perform a desktop installation for the FANVIL I52W?
Align the slot on the rear side of the panel with the pin on the desktop bracket and slide the bracket up to complete the installation.
How do I find the IP address of the FANVIL I52W?
The default WAN mode for the FANVIL I52W is DHCP. You can use the iDoorPhone Network Scanner to click the Refresh button to search for the device and find the IP address.
Alternatively, after booting the FANVIL I52W, long press the unlock key to enter the menu, and then click System Message followed by Network to view the IP address.
How do I log into the web setting page of the FANVIL I52W?
Input the IP address of the FANVIL I52W into the address bar of a web browser on your PC. The default user name and password are both admin.
How do I configure the SIP account on the FANVIL I52W?
Step 1. Log in to the web setting page of the FANVIL I52W.
Step 2. Navigate to the SIP account settings.
Step 3. Set the SIP server address, port, user name, password, and SIP user with the assigned SIP account parameters.
Step 4. Select Activate, and then click Apply to save the settings.
How do I configure the unlock setting on the FANVIL I52W?
Navigate to the Function Key settings. Set the unlock key type to DTMF, and set the value to the password required to open the correct access control device.
How do I answer or hang up calls on the FANVIL I52W?
When the door phone calls the FANVIL I52W, click the Answer key to answer the call, and click the Return / Hang up key to hang up the call.
How do I unlock the door using the FANVIL I52W?
During a call between the FANVIL I52W and the door phone, click the Unlock Key to unlock the door.
How do I turn on or off the monitoring feature on the FANVIL I52W?
Click the Monitor key on the FANVIL I52W to check the monitoring screen, and click the Return / Hang up key to exit. Note that this only supports communication with video door phones.
How do I call the management center from the FANVIL I52W?
Click the Management Center Key on the FANVIL I52W to call the management center, and click the Return / Hang up key to cancel the call.
CLICK HERE TO DOWNLOAD FANVIL I52W (01) PDF DOCUMENT