Free English FANVIL I51W (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD FANVIL I51W (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the physical specifications of the FANVIL I51W?
| Model | LCD | PoE | Wi-Fi (2.4G) | RS-485 | Dimension |
| FANVIL I51W | 4.3 inch | Yes | Yes | Yes | 163x104x26mm |
What are the components included with the FANVIL I51W?
The package contains the following items: one Indoor Station (FANVIL I51W), one Quick Installation Guide, one Wall-mount Bracket, one 10 pin Cable, one 4 pin Cable, one 2 pin Cable, two TA4*30mm Screws, two PM4*16mm Screws, and two Screw fixing seats.
What is the function of the keys on the front panel of the FANVIL I51W?
| No. | Description |
| 1 | Management Center Key |
| 2 | Monitor key |
| 3 | Unlock Key |
| 4 | Return / Hang up key |
| 5 | Answer key |
| 6 | Microphone |
What are the rear panel interface descriptions for the FANVIL I51W?
| No. | Description |
| 1 | DC Power interface: 12V/1A input. |
| 2 | Ethernet interface: standard RJ45 interface, 10/100M adaptive, it is recommended to use CAT5 or CAT5E network cable. |
| 3 | Industrial power interface. |
| 4 | 1 set of RS485 interface: can be connected to card reader, sensor etc. |
| 5 | 8 sets of alarm input interfaces: input devices for connecting switches, infrared sensor, door sensor, vibration sensors etc. |
| 6 | Speaker. |
How do I perform a wall mounted installation for the FANVIL I51W without an 86 embedded box?
Step 1. According to the position of the cable in the wall, dig out a square hole (height*width*depth=58.5*60*50mm) that can accommodate all cables.
Step 2. Align the square hole of the wall bracket with the hole digged out before, then mark the two fixation holes through the bracket on the wall.
Step 3. Take down the bracket, use an electric drill to make the two fixation holes on the wall, then insert the two screw fixing seats provided.
Step 4. Fix the wall bracket on the wall with two TA4*30 screws.
How do I perform a wall mounted installation for the FANVIL I51W using an 86 embedded box or Dual gang box?
Step 1. Make sure all cables are in the embedded box.
Step 2. To fix on an 86 embedded box, use two PM4*16mm screws.
Step 3. To fix on a Dual Gang Box, use 4 PM3.3*20.5mm screws.
How do I finish the installation of the FANVIL I51W onto the wall bracket?
Step 1. Connect necessary peripherals such as other input and output devices to the host through the cable.
Step 2. Power on the device.
Step 3. If it is working properly, align the slot on the rear side of the panel with the pin on the wall bracket and slide the host down to complete the installation.
How do I find the IP address of my FANVIL I51W?
Method 1: Open the iDoorPhone Network Scanner, click the Refresh button to search the device and find the IP address.
Method 2: After booting, long press the unlock key to enter the menu, then click System Message and select Network.
How do I configure the SIP account for the FANVIL I51W?
Step 1. Input the IP address of the FANVIL I51W into the address bar of your PC web browser.
Step 2. Log in using the default user name and password, which are both admin.
Step 3. Go to the SIP settings to enter the server address, port, user name, password, and SIP user with assigned SIP account parameters.
Step 4. Select Activate and then click Apply to save the settings.
How do I configure unlock settings on the FANVIL I51W?
Go to the Function Key settings. Set the unlock key type to DTMF and set the value to the password required to open the correct access control device.
How do I use the FANVIL I51W for local operations like answering calls or unlocking the door?
To answer a call from a door phone, click the Answer key and click the Return/Hang up key to hang up. To unlock the door during a call, click the Unlock key. To monitor, click the Monitor key to check the screen and click the Return/Hang up key to exit. To call the management center, click the Management Center key and click the Return/Hang up key to cancel the call.
CLICK HERE TO DOWNLOAD FANVIL I51W (01) PDF DOCUMENT