EXTRON SHARELINK PRO 2000 (01) PDF Document

The EXTRON SHARELINK PRO 2000 can be placed on a desktop or tabletop using the included rubber feet, or it can be mounted to a rack or furniture.

Yes, do not block or restrict air ventilation holes on the top and sides of the EXTRON SHARELINK PRO 2000.

For a balanced audio input, wire the 5-pole 3.5 mm captive screw connector with the Tip as Left, Sleeve(s) as Ground, and the two Rings as the negative/positive signal paths for the Left and Right channels.

For an unbalanced audio input, wire the 5-pole 3.5 mm captive screw connector with the Tip as Left, Tip as Right, and the Sleeves as the ground connection.

For unbalanced audio, connect the sleeves to the ground contact. Do not connect the sleeves to the negative contacts.

The default IP address is 192.168.254.254, the subnet mask is 255.255.255.0, DHCP is off, the gateway IP address is 0.0.0.0, the DNS address is 0.0.0.0, and the link speed and duplex level are autodetected.

The maximum output resolution for HDMI window mode is 1080p at 60Hz.

The maximum output resolution for HDMI pass through mode is 4K at 60Hz.

First, ensure that the external wireless access point and the EXTRON SHARELINK PRO 2000 are wired to the same network. Second, ensure that the EXTRON SHARELINK PRO 2000 is powered on and that wireless network capability is enabled on your computer. Finally, open the wireless networks on your computer and connect to the external wireless access point.

First, ensure that your computer is connected to the network through a hub, switch, or router. Second, connect the LAN port of the EXTRON SHARELINK PRO 2000 to the network device using an RJ-45 cable.

Open the EXTRON SHARELINK PRO 2000 software, select your desired receiver, and enter the login code when prompted. Once connected, select the Mirror Screen button on the share screen to automatically mirror your computer screen on the display device. Click Stop Presenting to stop the presentation.

On the share screen of the EXTRON SHARELINK PRO 2000 software, click the Mirror Application button. This opens a sub-menu showing all the programs and applications currently running on your computer. Select a program or application to automatically mirror it on the display.

On the share screen of the EXTRON SHARELINK PRO 2000 software, click the Share Image or Video button to navigate to a specific video or image file on your computer, then double-click the file to present it on the display.

On the share screen of the EXTRON SHARELINK PRO 2000 software, click the Share from HDMI button to share the connected HDMI source as a window.

To moderate, click the participant icon and select Moderator from the menu. Click Enable Moderator. The Moderate option will then appear on the software menu along the left side of the page, allowing you to access the Pending Participants tab to manage requests or the Connected Participants tab to disconnect participants.

The app allows you to present photos, documents, web pages, device screenshots, and the device camera content to the display. It also supports iOS screen mirroring.

To refresh the list, drag down and release the list in the app. If the unit is not listed, select the New Connection button and enter the hostname or IP address as instructed on the app screen.

On the share screen of the EXTRON SHARELINK PRO 2000 app, select the button to see the options and click Share with Camera to share an image taken by the device camera.