Free English ASPIRE FLEXUS STIK (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE FLEXUS STIK (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications of the ASPIRE FLEXUS STIK?
The technical specifications for the ASPIRE FLEXUS STIK include:
Dimensions: 22*112.8 mm
Pod capacity: 3.0 ml
Built-in battery capacity: 1200 mAh
Activation: Auto-draw or button activated
Supported resistance range: 0.3-2.6 ohm
Longest vaping time: 10 seconds
Coil parameters: 0.6 ohm Mesh Coil (15-18W) and 1.0 ohm Mesh Coil (12-15W)
Power Adjustment: Low, Mid, High 3 wattage level adjustment
Charging: Type-C, 1A
How do I fill the pod on my ASPIRE FLEXUS STIK?
To fill the pod of your ASPIRE FLEXUS STIK, follow these steps:
Step 1. Pull the pod out of the device.
Step 2. Lift the silicone seal at the bottom of the pod.
Step 3. Add e-liquid into the pod through the filling port.
Step 4. Replace the silicone seal firmly.
Step 5. When you place the pod back, make sure that the bottom of the pod is aligned with the position of the airflow hole.
Important: After filling a new coil, let the pod/tank stand for 5 minutes to ensure the coil is saturated with e-liquid before use. Do not let the pod/tank become completely empty to avoid damage to the coil.
How do I replace the coil in the ASPIRE FLEXUS STIK?
Follow these steps to replace the coil in your ASPIRE FLEXUS STIK:
Step 1. Pull the pod out of the device battery component.
Step 2. Pull the used coil out from the bottom of the pod.
Step 3. Push a new replacement coil into the pod.
Step 4. Place the pod back into the device battery component.
How do I operate the power settings and check the device status of the ASPIRE FLEXUS STIK?
The ASPIRE FLEXUS STIK uses an indicator light to signal various statuses and settings as detailed in the following table:
| Action/Status | Indicator Light Detail |
| Turn on/off (press fire button 5 times) | Flash white 3 times |
| Lock/Unlock (press fire button 5 times) | Red and blue flash 3 times |
| Battery level < 3.5V (0-30%) | On red |
| Battery level 3.5V-3.8V (30-60%) | On blue |
| Battery level 3.8V-4.2V (60-100%) | On green |
| Low wattage level (press fire button 3 times) | Low level: Red flash 2 times |
| Mid wattage level (press fire button 3 times) | Mid level: Blue flash 2 times |
| High wattage level (press fire button 3 times) | High level: Green flash 2 times |
How do I charge the ASPIRE FLEXUS STIK?
To charge the ASPIRE FLEXUS STIK, connect the provided Type-C cable to the charging port. Refer to the following charging specifications and indicators:
| Charging Parameter | Specification |
| Maximum charge current | 1A |
| Recommended charge voltage | 5V |
| Fully charged notification | LED green flashes 20 times |
| Type-C cable connected | LED flashes red 3 times |
| Type-C cable unplugged | LED flashes green 3 times |
What are the built-in protection features of the ASPIRE FLEXUS STIK?
The ASPIRE FLEXUS STIK includes several safety protections to ensure reliable operation:
Vaping Over-Time Protection: If vaped for more than 10 seconds, the LED light will flash red and blue 10 times and the device will stop firing.
Short Circuit Protection: The LED light will flash white 3 times and the device will stop firing.
Low Voltage Protection: The LED light will flash red 15 times.
Overcharge Protection: The device will stop charging automatically once full.
Overheat Protection: The LED light will stay yellow for 3 seconds and then the device will cut off and stop firing.
Over Voltage Protection: When charging is abnormal, the device will stop charging and vaping is not allowed.
What should I do if I experience side effects while using the ASPIRE FLEXUS STIK?
If you experience any of the following side effects while using the ASPIRE FLEXUS STIK, stop using the product immediately and consult your doctor:
Feeling faint or nausea (feeling sick)
Dizziness or headache
Stomach discomfort, hiccups, or vomiting
Chest pain or nasal congestion
Heart palpitations or abnormal heart rate
Irritation of the mouth or throat
CLICK HERE TO DOWNLOAD ASPIRE FLEXUS STIK (01) PDF DOCUMENT