Free English KIIROO PEARL3 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KIIROO PEARL3 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I set up and charge my KIIROO PEARL3?
To set up your device, use the Pin USB charger provided. Insert the Pin into the small hole located at the very bottom of the KIIROO PEARL3. Plug the other end into a USB port, such as a computer or a wall adapter (please note that a wall adapter is not included in the box).
Charge the device until the light turns green, which takes approximately 2 hours. It is recommended to charge the device fully prior to the first use.
How do I power the KIIROO PEARL3 on and off?
To power on the device, press the multifunctional button located at the bottom of the KIIROO PEARL3 and hold it for 4 seconds. A solid blue color will appear, indicating the device is on and in Bluetooth Mode.
To turn off the device, hold the multifunctional button for 4 seconds until the light goes off.
What are the different vibration modes and click patterns available on the KIIROO PEARL3?
The KIIROO PEARL3 features 7 distinct modes. You can cycle through each mode by clicking the single multifunctional button until you reach your choice.
| Mode | Activation | Light Indicator |
|---|---|---|
| Bluetooth Mode | 0 click (Initial power on) | Blue light |
| Touch-sensitive Mode | 1 click | White light |
| Slow (Manual Mode) | 2 clicks | Purple light |
| Medium (Manual Mode) | 3 clicks | Purple light |
| Fast (Manual Mode) | 4 clicks | Purple light |
| Pattern 1 (Manual Mode) | 5 clicks | Purple light |
| Pattern 2 (Manual Mode) | 6 clicks | Purple light |
Please note that Bluetooth Mode is the only mode where you can send and receive signals to and from partners or content.
What do the different LED light indicators mean on the KIIROO PEARL3?
The LED light on the bottom of the KIIROO PEARL3 communicates the device status and battery levels as follows:
| LED Color/Action | Meaning |
|---|---|
| Solid Blue | Bluetooth mode is active. |
| Solid White | Touch-sensitive mode is active. |
| Solid Purple | Manual mode is active. |
| Blinking Red (Slow) | The device is currently charging. |
| Solid Green | The device is fully charged. |
| Flashing Red (Quick) | Battery is low. You have 5 minutes before the device disconnects and turns off. |
| Blinking Yellow | An update is available or an error has occurred. |
| Solid Yellow | The device is in Bootloader mode or is currently updating. |
How does the Touch-sensitive mode work on the KIIROO PEARL3?
When the KIIROO PEARL3 is in Touch-sensitive mode (indicated by a white light), the surface responds intuitively to touch. It will vibrate whenever it comes into contact with your body. Moving the upper surface over the clitoris provides precise sensations at the point of contact, while moving the device deeper inside causes the entire shaft to respond with widespread vibrations.
What are the handling and lubrication requirements for the KIIROO PEARL3?
When using the KIIROO PEARL3, follow these usage guidelines:
Hold the device at its base and apply a generous amount of water-based lubricant. Using lubricant prolongs the lifespan of the device and ensures a comfortable experience.
Do not use silicone lubricant, as it will deteriorate the silicone material of the KIIROO PEARL3. Do not use massage oils or hand creams as lubricants.
The KIIROO PEARL3 is intended for vaginal use only. It is not a hands-free device. Do not use the device anally, as it does not have a tapered base and may get stuck.
The device is waterproof and can be used in the bath or shower.
How should I clean and maintain the KIIROO PEARL3?
Always clean the KIIROO PEARL3 thoroughly after each use. Use warm water along with antibacterial soap, dish soap, or a specialized toy cleaner.
Avoid using cleaners that contain alcohol, petrol, or acetone. Do not use harsh soaps, as these substances can damage the silicone. Hygiene silicone is easy to clean and will last for years when cared for properly.
What safety warnings should I be aware of when using the KIIROO PEARL3?
For your safety and the longevity of the KIIROO PEARL3, adhere to the following precautions:
Do not use the device if there are exposed electronic elements or if the device is excessively hot to the touch.
Do not use the device on inflamed or irritated areas.
Avoid leaving the device in direct sunlight and never expose it to extreme heat. Do not use heating appliances to dry the device.
The Bluetooth module is located in the handle. For optimal reception and personal safety, avoid inserting the handle; only use the top 13cm of the device.
Always store the device out of reach of children. The device is not to be used by minors under the age of 18.
What are the technical specifications of the KIIROO PEARL3?
The technical specifications for the KIIROO PEARL3 are as follows:
| Feature | Specification |
|---|---|
| Materials | ABS, Silicone |
| Finish | Matte chrome for ABS, matt finish for silicone |
| Size | 200 x 39 x 36.5mm / 7.87 x 1.53 x 1.46inch |
| Weight (Device only) | 139g / 4.90oz / 0.30lb |
| Weight (Device + Cable) | 159g / 5.60oz / 0.35lb |
| Battery | Lithium-ion 540 MAH 3.7V |
| Charging Time | 2 hours |
| User Time | 3 hours |
CLICK HERE TO DOWNLOAD KIIROO PEARL3 (01) PDF DOCUMENT