AQQA AQ177 (01) PDF Document

The AQQA AQ177 Aquarium Gravel Cleaner Kit has several key features:

• Multi-Functional Gravel Cleaner: It is designed for effortless water changes, sand cleaning, and waste removal, effectively eliminating fish waste, debris, and cloudy water from aquariums.

• Innovative Design: It delivers enhanced suction power for superior performance. The ergonomic siphon tube ensures a comfortable and secure grip during use.

• Powerful Vacuum Performance: It effortlessly cleans every corner of your tank without requiring you to get your hands wet. The quick water drainage function further streamlines maintenance.

• Versatile Cleaning Kit: This all-in-one tool combines a scrubbing brush and an algae scraper. The retractable blade cover prevents accidental cuts when the scraper is not in use. Both the scraper head and brush can rotate independently, enabling deep cleaning of aquarium surfaces. The soft rubber handle provides a non-slip, comfortable grip for extended use.

The AQQA AQ177 gravel cleaner includes two extension tubes. The adjustable length ranges for the two sizes are as follows:

• AQ177-S size: Offers an adjustable length range of 35-78.5cm (13.8-31.0inch).

• AQ177-M size: Adjusts from 44-97cm (17.3-38.2inch).

Note: The adjustable range is measured from the right-angle connector to the anti-clog brush head.

The AQQA AQ177 features a rotating dial for one-handed control of water flow. To adjust the flow:

• When the green marker on the dial aligns with the flow direction, the water valve is fully open.

• When the green marker is not aligned with the flow direction, the valve is partially open or closed.

You can use intuitive clockwise/counterclockwise cycling to seamlessly manage water flow, from precise flow adjustment to a complete shut-off, all with a simple twist.

The AQQA AQ177 kit includes the following components:

• Rigid tube x2 (S: 28cm/11inches*2, M: 37.8/14.9inches*2)

• Anti-clog mesh screen x1

• Anti-clog brush head x1

• Flexible hose x1 (S: 1.1m/3.6ft, M: 1.4m/4.6ft)

• Transparent sand separation chamber x1

• Hose clamp x1

• Rotating handle

• Telescopic locking nut

• Siphon ball

To use your AQQA AQ177, follow these steps:

1. Connect the water inlet and outlet before use. Ensure the arrow on the delivery pipe is installed in the direction of the water outlet.

2. Put the extension tube into the aquarium and the water outlet into a bucket. When using the gravel cleaner, the water outlet must be at least 50cm/19.7 inches below the water inlet.

3. The water changer can be securely mounted on aquarium glass with thicknesses ranging from 6mm to 30mm (0.23-1.18 inches). Holding it manually is also acceptable.

4. Submerge the water intake completely.

5. Press down on the siphon ball several times to initiate water flow.

The AQQA AQ177 has a detachable rotating handle to facilitate cleaning and maintenance. When the handle is rotated to the position where the opening location is visible, the handle can be detached from the rigid tube, allowing for thorough cleaning and maintenance.

The dimensions of the cleaning brush are as follows:

• Brush Head Width: 62mm / 2.44 inches

• Brush Head Height: 33mm / 1.3 inches

• Brush Bristle Length: 21mm / 0.83 inches

• Total Tool Length: 490mm / 19.3 inches

Safety Warning: The blade is sharp. Handle with extreme care during operation.

STEP 1: Use the included wrench to loosen the fastening screw on the back of the brush head.

STEP 2: Position the blade on the front blade base platform, aligning its circular hole with the central protrusion.

STEP 3: Secure the fixed plate by placing the cover plate over it.

STEP 4: Tighten the back fastening screw firmly with the wrench.

Do not dispose of the AQQA AQ177 product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. Collecting and recycling waste is a way of saving natural resources. Please consult with your local seller to make sure the product is disposed of in an environmentally friendly way.