Free English AQQA AQ171 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD AQQA AQ171 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

What are the key features of the AQQA AQ171 Aquarium Cooling Fan?

The AQQA AQ171 cooling fan has several key features:

Easy to Install: The fan has an adjustable knob for simple installation and movement, suitable for fish tanks with a maximum thickness of 15mm.

Adjustable: The cooling fan offers 5 adjustable wind speeds, the ability to adjust the wind direction, and 5 timer periods.

Safety: It operates on a 12V voltage to ensure fan safety, with safe insulation material wiring to prevent danger.

Quiet and Energy-saving: Designed for fresh and saltwater aquariums, it is much quieter than a regular fan.

High-quality Product: The fan features a timer and wind speed setting function. It has a sturdy ABS plastic housing, a full-copper motor, and FDB bearings for a comfortable wind feeling.


What are the product specifications for the AQQA AQ171 models?

Model FK055-1FAN FK055-3FANS
Input 100-240V 100-240V
Output 12V 12V
Power 4W 12W
Revolutions/Min 3600 3600
Cooling fan size 4.13*4.13*1.18 inches 12.39*4.13*1.18 inches
Applicable tank size <11.8″(30CM) <23.62″(60CM)
Rimless glass thickness <0.59″(15mm) <0.59″(15mm)

How do I operate the controller for the AQQA AQ171?

Follow these steps to operate the controller for your AQQA AQ171:

1. Plug in the adapter and press the “ON/OFF” button (which is also the “Speed” button on the left side of the controller). The fan will start, and the 1st gear indicator light will turn on. Note that the Speed setting button and the ON/OFF function share the same button.

2. Press the “Time” button on the right side of the controller to select the desired time period. You can choose from five options: 0.5H, 1H, 2H, 4H, or 12H. The corresponding indicator light will illuminate when the setting is complete.

3. Press the “Speed” button on the left side of the controller to select the desired wind speed. There are 5 gear options for air volume. The corresponding indicator light will turn on when the selection is complete.


How do I assemble and install the AQQA AQ171?

Follow these instructions to assemble your AQQA AQ171 cooling fan:

1. Fix the fan on the aquarium wall.

2. Plug the governor (controller) end into the fan side wiring position.

3. Note: If you purchased a three-head version, you must connect the power splitter with the fan first. Use the female connectors of the fan cable to connect the three male connectors of the splitter in turn. The other end of the splitter is then connected to the governor.

4. Power on the power adapter by plugging it into an electrical outlet.


What is included in the box with the AQQA AQ171?

The packing list for the AQQA AQ171 includes:

• Fan

• 1×Power adapter

• 1×Timing governor

• 1×User manual


What are the important attentions and precautions for using the AQQA AQ171?

Please observe the following precautions when using the AQQA AQ171:

• Please read the user manual carefully before using and follow it strictly.

• Please keep the power supply away from water since it is not waterproof.

• Please keep the cooling fan away from flammable items to avoid accidents.

• Please unplug the power and contact the seller if the cooling fan is not working properly. Opening the unit will void the warranty.

• Please unplug the power before performing maintenance.

• Please mind that the operating temperature range for the cooling fan is between 40°F~95°F (4°C~35°C).


What are the primary safety warnings for the AQQA AQ171?

To avoid possible electric shock, please observe the following basic safety precautions:

1. Read and follow the user manual strictly.

2. If the appliance falls into the water, DO NOT touch it. First unplug it, then retrieve it. If electrical components of the appliance get wet, unplug it immediately.

3. Do not operate the cooling fan if it has a damaged cord or plug, is malfunctioning, or has been dropped or damaged in any manner. The power cord cannot be replaced. If the cord is damaged, the cooling fan should be discarded.

4. To avoid the plug getting wet, position the aquarium to one side of a wall-mounted outlet. Arrange a “drip loop” for the cord, which is the part of the cord below the outlet level that prevents water from traveling along the cord to the outlet. If the plug or outlet gets wet, DO NOT unplug the cord. First, disconnect the fuse or circuit breaker that supplies power to the fan.

5. Close supervision is necessary when the cooling fan is used near children.

6. To avoid injury, do not contact moving or hot parts.

7. Always unplug the fan when not in use, before maintenance, or before placing hands in the water. Grasp the plug and pull to disconnect; never yank the cord.

8. Do not use the fan for other than its intended use. Using attachments not recommended by the manufacturer may cause an unsafe condition.

9. Do not install or store the fan where it will be exposed to extreme weather or temperatures below freezing.

10. Ensure the fan is securely installed before operating it.

11. The cooling fan is intended FOR HOUSEHOLD USE ONLY.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

CLICK HERE TO DOWNLOAD AQQA AQ171 (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.