Free English ANKO YF-KM-23X17 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ANKO YF-KM-23X17 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I assemble and install the ANKO YF-KM-23X17 solar swirl tree stakes?
To set up the ANKO YF-KM-23X17, follow these installation steps:
1. Remove all packaging before use and dispose of it safely.
2. Check the installation area to ensure there are no pipes or mains cables immediately underneath the surface.
3. Fix the solar panel assembly into the ground using the provided anchor spike.
4. Select a location with soft ground for the light stakes to allow the spikes to be pushed in easily.
5. Insert each light stake spike into the ground at your desired locations.
6. Ensure all cables are anchored properly so they do not present a tripping hazard.
Where is the best place to position the solar panel for the ANKO YF-KM-23X17?
The solar panel for the ANKO YF-KM-23X17 should be placed in a location where it receives direct sunlight. You should avoid areas where shadows from buildings, trees, walls, or hedges might fall on the panel, as this will reduce its performance. It is also important to avoid positioning the panel near other light sources like streetlights or floodlights, as these may affect the sensor and prevent the lights from illuminating in the dark.
How do I turn on the ANKO YF-KM-23X17 light stakes?
To activate the ANKO YF-KM-23X17, locate the ON/OFF switch situated at the bottom of the unit and turn it to the ON position.
How does the solar technology in the ANKO YF-KM-23X17 work?
The ANKO YF-KM-23X17 consists of a solar cell, a rechargeable battery, and LED lights which come preassembled. During the daytime, sunlight charges the battery. At night, the energy stored in the battery is used to power the LED lights. No other external power or connections are required. The length of time the lights stay on at night depends on the amount of sunlight the panel received during the day.
What are the weather resistance and storage guidelines for the ANKO YF-KM-23X17?
The ANKO YF-KM-23X17 light stakes are designed for outdoor use and can be left outside in the rain. However, they should not be immersed in water or exposed to water jets. For optimum product life, the solar panel should be stored indoors during extreme weather conditions, such as prolonged periods of snow and frost. Note that some condensation may form inside the solar panel or unit in cold conditions, which is normal and can be ignored.
What safety warnings should I be aware of when using the ANKO YF-KM-23X17?
When using the ANKO YF-KM-23X17, please adhere to the following safety precautions:
The stakes are for OUTDOOR USE ONLY.
This product is not a toy; keep it out of reach of children and pets.
The product contains small parts that may pose a choking hazard if detached.
Keep the unit away from fire, barbecues, heaters, or any other direct sources of heat.
The battery and the LED bulbs are non-replaceable; do not attempt to replace them.
The end points of the ground stakes are sharp. Do not allow children to play with the anchor spikes.
Prevent water from coming into contact with the wiring or batteries.
What are the dimensions and specifications of the ANKO YF-KM-23X17?
Based on the assembly diagram for the ANKO YF-KM-23X17, the specifications are as follows:
Height of the swirl stakes: 48cm
Distance between stakes: 50cm
Lead wire length from the last stake to the solar panel: 1m
Total components: 4 solar swirl tree stakes and 1 solar panel assembly.
CLICK HERE TO DOWNLOAD ANKO YF-KM-23X17 (01) PDF DOCUMENT