Free English ANKO M32081 (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ANKO M32081 (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
Who should consult a doctor before using the ANKO M32081 Pillow Massager?
We recommend checking with your doctor before using the ANKO M32081 massager, especially if you have health problems. Specifically, consult your doctor if:
You are pregnant.
You have a pacemaker.
You have any concerns regarding your health.
Additionally, individuals with pacemakers should consult a physician before using this product.
What are the usage restrictions regarding specific body areas or conditions for the ANKO M32081?
The massage should be pleasant and comfortable. Should pain or discomfort result, or if you experience pain in a muscle or joint for a prolonged period of time, stop use and consult your doctor.
Never use any massager on the face, open wounds, discoloured areas, areas of poor circulation or any areas of the body that are swollen, burned, inflamed or where skin eruptions or sores are present.
Do not use the machine while under the influence of alcohol, sleeping pills, or sedatives.
To prevent bruising, do not press too hard on the device.
Is it normal to experience skin redness after using the ANKO M32081?
It is normal to feel itching, tingling, or see redness on the area of the skin where the massager was used after use. These symptoms will soon disappear. However, if these symptoms remain for an extended period, we suggest consulting your doctor as there may be a more serious underlying issue.
What is the recommended usage time for the ANKO M32081 to prevent overheating?
Do not use this product for more than 15 minutes at a time. Allow at least a 30-minute cool-down period in between uses. Extensive use could lead to the appliance overheating and reduce the life of the product.
This product is not intended for medical use; it is intended only to provide a comfortable massage.
Can children use the ANKO M32081 Pillow Massager?
This product is not to be used by very young children (0-3 years). Children under the age of three are not to use this appliance due to their inability to react to overheating.
Children should be supervised to ensure that they do not play with the appliance. The unattended use of heat by children or incapacitated persons may be dangerous.
Take care that children cannot touch the appliance when in use, and make sure they cannot reach and pull the power cord.
What are the electrical and water safety warnings for the ANKO M32081?
To protect against the risk of electric shock, do not immerse the appliance, cord, or power adaptor in water or other liquids.
Do not use or store the product near sinks, baths, or showers containing water or near running water.
Do not use in the bath, shower, spa, pool, etc.
Do not operate the appliance with wet hands or wet feet to reduce the risk of electric shock.
Never reach or touch an appliance which has fallen into water. Unplug from the mains power point immediately.
Can I use the ANKO M32081 while sleeping or in bed?
No. Do not use the appliance while sleeping or if feeling sleepy.
Do not use this product before bed. The massager has a stimulating effect and may delay sleep.
Do not use this product while in bed.
Do not cover the appliance while in use. The product will overheat and may cause fire, electrocution, damage to property, or injury to persons.
How do I operate the ANKO M32081 Pillow Massager?
1. Before first use, please read the Instruction Manual carefully.
2. Connect the power adaptor cable jack to the pillow massager.
3. Insert the Power Adaptor into the power point and switch on. The appliance is now ready for use.
4. Press the On/Off button, which is located on the side at the bottom right corner. This will activate the massage and heat function.
5. Press the On/Off button again to turn off the massage/heat.
6. Unplug the pillow massager when not in use.
How do I clean the ANKO M32081?
Unplug the unit and allow it to cool before cleaning. Clean only with a soft, slightly damp cloth.
NEVER allow water or any other liquids to come into contact with the appliance, especially the power socket or power adaptor.
DO NOT immerse in any liquid to clean.
NEVER use abrasive cleaners, brushes, or strong chemicals that may or may not be flammable and/or damaging to the product to clean.
How should I store the ANKO M32081 when not in use?
Unplug the power adaptor and disconnect from the appliance.
Place the massager in its box or in a cool, dry place.
Avoid contact with sharp edges or pointed objects.
To avoid breakage, DO NOT wrap the power cord around the unit.
DO NOT hang the unit by the cord.
CLICK HERE TO DOWNLOAD ANKO M32081 (02) PDF DOCUMENT