AMAZON BASICS B07D3FNGKJ (01) PDF Document

The AMAZON BASICS B07D3FNGKJ features the following parts and controls:

1. Power indicator

2. Front grille

3. Air intake

4. Tip-over switch

5. Power cord with plug

6. Thermostat knob

7. Mode knob

When using the AMAZON BASICS B07D3FNGKJ, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury, including the following:

Do not attempt to repair the product yourself; repairs must be conducted by qualified personnel only.

To avoid overheating, do not cover the product.

Do not use this product in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

During cleaning or operation, do not immerse the electrical parts of the product in water or other liquids. Never hold the product under running water.

Children of less than 3 years should be kept away unless continuously supervised.

The product must not be located immediately below a socket outlet.

Do not use this product with a programmer, timer, separate remote-control system or any other device that switches the product on automatically.

Do not use this product in the immediate surroundings of a bath, a shower or a swimming pool.

Use this product on a horizontal and stable surface.

Disconnect the product from the power supply when it is not in use.

Do not use this product in areas where dangerous and flammable materials, like petrol, paint thinner, paints and lacquers are used.

The AMAZON BASICS B07D3FNGKJ is intended for the following uses:

It is only suitable for well insulated spaces or occasional use.

It is intended for temporary heating or ventilating residential rooms.

It is intended for household use only and is not intended for commercial use.

It is intended to be used in dry indoor areas only.

The double square symbol indicates that the AMAZON BASICS B07D3FNGKJ is classified as protection class II. This means the product is equipped with reinforced or double insulation between the mains supply circuit and the output voltage or the casing, and therefore does not require a safety connection to an electrical earth (ground).

Follow these steps before the first use of the AMAZON BASICS B07D3FNGKJ:

Keep all packaging materials away from children to avoid the risk of suffocation.

Check for any transport damages.

Clean the product before the first use.

Before connecting to the power supply, check that the power supply voltage and current rating correspond with the power supply details shown on the product rating label.

To operate the AMAZON BASICS B07D3FNGKJ, follow these instructions:

Connect the power plug to an appropriate power outlet. Note that the power indicator stays on as long as the plug is connected to a power source.

Turn the thermostat knob clockwise all the way to the high position (+).

Set the mode knob to the desired setting:

Solid Circle Icon: The product is off.

Fan Icon: Fan only mode.

Single Wavy Line Icon: Low heat mode.

Double Wavy Line Icon: High heat mode.

To use the thermostat control on the AMAZON BASICS B07D3FNGKJ:

Step 1. Switch on the product.

Step 2. When the desired temperature in the room is reached, turn the thermostat knob counter-clockwise until the product turns off.

Step 3. The thermostat control will now maintain the temperature by turning the product on and off automatically.

The AMAZON BASICS B07D3FNGKJ is designed to automatically shut off when tipped over. Once the product is returned to the proper upright position, it will resume normal operation.

To clean the AMAZON BASICS B07D3FNGKJ safely and effectively:

Always unplug the product before cleaning to prevent electric shock.

To clean, wipe the exterior with a soft, slightly moist cloth.

Dry the product thoroughly after cleaning.

Never use corrosive detergents, wire brushes, abrasive scourers, or sharp metal utensils to clean the product.

Maintain the AMAZON BASICS B07D3FNGKJ by following these guidelines:

Store the product in a cool and dry place away from children and pets, ideally in its original packaging.

Avoid exposing the product to any vibrations and shocks.

If the AMAZON BASICS B07D3FNGKJ fails to operate, check the following:

Check if the power plug is connected to the power outlet and verify if the power outlet works.

Check if the product is actually switched on.

Unplug the product and let it cool down for 30 minutes.

Ensure the product is in the proper upright position to engage the tip-over switch correctly.

For UK users only: If the fuse in the plug is blown, use a flat screwdriver to open the fuse compartment cover. Remove the blown fuse and replace it with a new 13 A, BS1362 type fuse, then refit the cover.

If the plug of the AMAZON BASICS B07D3FNGKJ needs replacement, follow these wiring instructions for the power cable:

Green/Yellow wire: This is the Earth wire and must be connected to the terminal marked E or by the earth symbol, or colored Green or Green/Yellow.

Blue wire: This is the Neutral wire and must be connected to the terminal marked N or colored Black.

Brown wire: This is the Live wire and must be connected to the terminal marked L or colored Red.

The appliance is protected by a 13 A approved (BS 1362) fuse. The outer sheath of the cable should be firmly held by the clamp.

The AMAZON BASICS B07D3FNGKJ uses a mechanic thermostat for room temperature control. It does not include features like electronic heat charge control, presence detection, open window detection, or distance control options.