AMAZON BASICS B07K6XTRVR (01) PDF MANUAL

The package contains the following components: Lid, Spout, Lid release button, Handle, Main body, On/off switch with indicator, and Power base.

For additional protection, the use of a power outlet with a rated current of 10 A is recommended. To avoid circuit overload, do not operate another high-wattage appliance on the same circuit.

Do not fill the kettle when positioned on its base. Make sure that the kettle base is dry before placing it onto the power base.

No, never leave the appliance unattended when in use.

Yes, close supervision is necessary when using the appliance near children or infirm persons.

The electric kettle must be operated on a flat surface. Do not place this appliance on or near a hot gas or electric burner or on top of other electric appliances.

Do not touch the hot surface; use the handle. Be aware of the steam being emitted from the spout or lid, especially during refilling. Do not remove the lid during the boiling cycle.

Do not use the kettle to heat anything other than water. Do not fill above the “max” indication. Do not operate the kettle if water is below minimum.

Do not let the power cord hang over the edge of the table or touch hot surfaces. When not in use, drape the power cord in the compartment of the base unit.

Do not immerse any part of the appliance in water or other liquids. Do not use your appliance with another extension cord unless this cord has been checked and tested by a qualified technician or service person. Always use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance.

If the power cord is damaged, it must be changed by the manufacturer or an authorized person.

Do not use a base unit other than the one supplied. The use of accessories not recommended by the manufacturer may result in fire, electrical shock or personal injury.

No, do not insert any object into slots or holes of the kettle.

This appliance is for household use only. Do not use outdoors.

This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.

This appliance is intended to be used in household and similar applications such as: Staff kitchen areas in shops, offices and other working environments; Farm houses; By clients in hotels, motels and other residential type environments; Bed and breakfast type environments.

No, do not touch the inside of the kettle. The heating element surface is subjected to residual heat after use.

Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided they have been given supervision or instruction concerning use of the appliance in a safe way and the hazards involved have been understood.

No, children shall not play with the appliance.

If the kettle is overfilled, boiling water may be ejected.

No, the kettle is only to be used with the stand provided.

To reduce the risk of fire or electric shock, do not remove the bottom cover of the body or the power base by yourself.

No, do not remove the lid while the water is boiling.

Do not switch on the kettle if there is a possibility that the water in the heater is frozen. Always unplug from the socket under the following conditions: no water in kettle; filling water; not in use; before cleaning or moving the kettle.

Position the lid so that steam is directed away from the handle.

Ensure that the appliance is switched off before removing it from its stand.

Avoid spillage on the connector.

Incorrect use of the appliance may cause serious burns.

If the kettle is overfilled, boiling water may be ejected. The kettle is only to be used with the stand provided.

The kettle offers rapid boiling, steam control to switch off after boiling, boil dry protection that automatically cuts out power when there is no water, and a double layer pot to prevent scalding. It also features a high-quality thermostat.

For first time use or after long periods of not using the kettle, it is recommended that you fill the kettle to the maximum level mark with fresh tap water, boil, and empty the kettle at least 2 times to rid the kettle of any tiny particles. Do not drink the water used to rinse the kettle.

Press the release button on the handle to open the lid.

Remove the kettle from the base and take it to the water source. Fill the kettle with the desired amount (which is no less than the minimum and no more than the maximum). Close the lid and place the kettle back on the base unit.

Connect the plug into a power outlet (220-240 V~). Turn the kettle on by pressing the switch. The light will illuminate to indicate the kettle is heating.

The kettle will automatically switch off once the water has boiled and the light will go off.

Lift the kettle from the base, and pour the water into a container.

To prevent electric shock, unplug the kettle before cleaning.

During cleaning, do not immerse the electrical parts of the product in water or other liquids. Never hold the product under running water.

Always unplug from the plug socket and allow the kettle to cool down before cleaning.

Do not use chemical, steel wool, or abrasive cleaners to clean the outside of the kettle, as these will scratch the surface and fade the outside color.

To remove mineral deposits, fill the kettle with 0.5L white vinegar and the remainder with water. Allow it to stand for at least 1 hour. Empty the solution from the kettle and wipe off any remaining deposits with a damp cloth. Then, fill the kettle with clean water, bring it to a boil, and discard the water. Repeat this procedure once more. If necessary, repeat these operations several times.

Do not immerse the kettle into water. The surface of the kettle may be wiped with a damp cloth and polished with a soft dry cloth.

Hold the top of the scale filter and pull upwards to remove it. Wash it with clean water and dry thoroughly before fixing it back in the kettle.