ZILR V-MOUNT 99 (01) PDF Document

The ZILR V-Mount Battery is included in the box. Please note that cables and the charger are sold separately.

The components of the ZILR V-MOUNT 99 are located on the front, side, and rear of the device.

FRONT:

1. LCD display

2. LED charging indicator

3. Display / Restart button

SIDE:

4. USB 3.0 Type-C PD port

5. Micro-USB port

6. USB 3.0 Type-A port

REAR:

8. V-Mount mounting port

9. Power terminal

The LCD display on the ZILR V-MOUNT 99 shows the battery level percentage. Additionally, icons for USB-A, USB-C, and Micro-USB will display the current voltage while the device is outputting power or charging.

The button on the ZILR V-MOUNT 99 has two primary functions based on how long it is pressed:

Short press: Lights up the display for viewing.

Long press: Hold for 10 seconds to restart the battery.

The ZILR V-MOUNT 99 can be charged using the USB-C, USB-A, and D-TAP ports.

While charging, after the display has turned off, there are 4 LED lights around the function button that will pulse to show that charging is in progress.

NOTE: Only one port can be used to charge the battery. Do not try to charge via multiple ports simultaneously.

Model No.: V99.16W

Weight: ≈502g

Size: 102*72*56mm

Temperature Range:

Charge: 0~45℃

Discharge: -10~-55℃

Storage: -20~25°C Within 1 year, -20~45°C Within 3 months, -20~60°C Within 1 month

TYPE-C Output Parameters:

TYPE-C 5V output voltage USB loaded CC=3A

TYPE-C 9V output voltage USB loaded CC=3A

TYPE-C 12V output voltage USB loaded CC=3A

TYPE-C 15V output voltage USB loaded CC=3A

TYPE-C 20V output voltage USB loaded CC=2.2A

Type-C port input (QC or PD adapter):

When charging with 5V/3A QC or PD adapter, charging current is 3A ± 0.2A.

When charging with 9V/3A QC or PD adapter, charging current is 3A ± 0.2A.

When charging with 12V/3A QC or PD adapter, charging current is 3A ± 0.2A.

When charging with 15V/3A PD adapter, charge current: 3A ±0.2A

When charging with 20V/2.2A PD adapter, charge current: 2.2A ±0.2A

USB-A Output Parameters:

QC2.0, QC3.0, FCP, AFC, low-voltage SCP, low-voltage

VOOC Micro USB Charging Parameters: 5V/3A

D-TAP Charging & Output:

99W discharge 14.8V/10A(MAX), charge 16.8V/10A(MAX)

Please follow these safety guidelines when using your ZILR V-MOUNT 99:

• While using this product, place it on a stable surface to ensure that it doesn’t fall, causing damage.

• Using this device outside the intended use or in a manner that is risky will void the warranty.

• Attempting to fix, modify, or take the device apart will void your warranty.

• Don’t use this device in extreme weather conditions, near water or moist areas, near heat or hot surfaces, or anything that will cause fire or water damage.

• Ensure that all plugs are connected securely while using the device.

• Do not short-circuit the battery.

• Inspect the device and all plugs and connectors before operation.

• Disconnecting cables while using the device without safety disconnecting from the operation system may result in data loss.

• Do not place heavy objects on top of this device.

• Do not force cables into the input connectors or use the wrong cable type.

• Ensure that any connected cables aren’t stretched, pinched, or can be walked on.

• This equipment is suitable for use in tropical locations with an ambient temperature of up to 40°C/104°F. Do not use in temperatures below 0°C/32°F.

• This battery is an electrochemical product and may need to be replaced after two years.

• Damage caused by using the wrong voltage is not covered.