Free English Z CAM EZPLAY (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD Z CAM EZPLAY (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I mount the Z CAM EZPLAY?
To mount the Z CAM EZPLAY, attach it to a Z CAM E2 series camera equipped with a V-mount plate (such as a Z CAM E2 Mark II series) or another device that has a V-mount plate. Ensure the mounting is secure.
How do I power the Z CAM EZPLAY?
First, ensure the Z CAM E2 series camera is powered on for normal operation. There are two power supply options for the Z CAM EZPLAY:
• Independently power the Z CAM EZPLAY via a 12V power supply using the 2-pin Lemo socket.
• Use the auxiliary power output port (AUX) of the Z CAM E2 series camera to supply power to the Z CAM EZPLAY.
How do I set up the network connection for the Z CAM EZPLAY?
2.2.1 Connect the Ethernet port of the Z CAM E2 series camera to the Ethernet port of the Z CAM EZPLAY with an Ethernet cable to establish a data transmission channel between the devices.
2.2.2 Connect the other Ethernet port of the Z CAM EZPLAY to a gigabit switch or router via an Ethernet cable to access the local area network.
How do I set up the video output on the Z CAM EZPLAY?
2.3.1 To establish an uninterrupted live streaming channel, connect the HDMI/SDI port of the Z CAM E2 series camera to a live streaming device such as a video switcher or encoder.
2.3.2 To establish a transmission channel for playback, connect the 3G-SDI port of the Z CAM EZPLAY to a video switcher or monitor.
How do I access and control the Z CAM EZPLAY?
3.1.1 Ensure that the operation terminal (PC/tablet) is on the same local area network as the Z CAM camera and the Z CAM EZPLAY.
3.1.2 Run the Z CAM Discovery Tool to scan and obtain the IP addresses of the Z CAM camera and the Z CAM EZPLAY.
3.1.3 Open a browser, enter the IP address of the Z CAM EZPLAY, and enter the Web client page.
3.1.4 Enter the IP address of the Z CAM camera in the page configuration column, and click “Save” to complete device pairing. You can then preview the camera’s shooting footage in real time.
What are the API Control Commands for the Z CAM EZPLAY?
You can execute functional control of the Z CAM EZPLAY via the HTTP protocol. The core commands are as follows:
• Start recording: url=”http://{EzPlay_ip}/ctrl/rec?action=start”
• Stop recording: url=”http://{EzPlay_ip}/ctrl/rec?action=stop”
• Switch to playback mode: url=”http://{EzPlay_ip}/ctrl/mode?action=to_pb”
• Playback: url=”http://{EzPlay_ip}/ctrl/pb?action=resume”
• Stop playback: url=”http://{EzPlay_ip}/ctrl/pb?action=stop”
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD Z CAM EZPLAY (01) PDF DOCUMENT